r/beetle • • 2h ago

1973 Super Beetle stuck in 2nd (again) after hockey stick fix — what broke, and should I fix it or sell it as-is?

5 Upvotes

Looking for advice from people who know these transmissions better than I do.

My 1973 Super Beetle got stuck in 2nd gear. My dad and I pulled the engine and transmission, opened the nose cone, and put the hockey stick back in place. While it was out we replaced some gaskets because it was leaking — we took off some side covers, but we didn't really touch the internals of the transmission itself.

After putting the engine and transmission back in, we were able to drive it around the yard, and it cycled through 1st, 2nd, 3rd, and 4th. But it would not go in reverse — the shifter would shift into the reverse position, but the car just would not move backwards.

While messing with it trying to get reverse to work, it's now stuck in 2nd gear again.

For context on the car itself: the engine runs great, there's very little rust if any, I'm in Georgia, and I only have a bill of sale for it — no title. I also only paid $6,000 for the car, which plays into how much it even makes sense to put into it.

A few questions:

  1. I'm trying to understand what actually happened here. My worry is that I may have broken something internally the first time, when I was originally trying to get it into reverse — that's the original incident that got us into this position in the first place. So even though we realigned the hockey stick, maybe there was still an underlying issue inside the transmission the whole time. Now it seems like it's just gotten misaligned again, and that underlying issue still persists, so nothing I do with the hockey stick will actually fix it. Does that sound plausible, and is there a way to tell whether it's just the hockey stick again versus something broken internally from the start?
  2. At that point, is it worth getting a whole new/replacement transmission altogether, or just not bothering with it at the price I got this car for?
  3. I'm planning to sell the car anyway and I'm getting close to being tired of messing with it. What's a realistic value for a 1973 Super Beetle with a great-running engine and very little rust, but a bad/stuck transmission and bill of sale only, sold as-is in Georgia?
  4. Would it be worth sourcing a used/rebuilt transmission and swapping it in myself before selling, or would I not get that money back out of it, given I only paid $6,000 for the car?
  5. If I paid a shop instead, what's a ballpark labor cost to swap or fix one of these?

Trying to decide if it's worth one more weekend, a shop bill, a whole replacement transmission, or just listing it as a project. Thanks in advance.


r/beetle • • 1d ago

Two time movie extra! (The car)

Thumbnail
gallery
167 Upvotes

I ran across a Facebook post a few years ago looking for period-correct cars for a movie being shot in Atlanta. I sent them some pictures and was selected. The movie was “Fly Me to the Moon” with Scarlett Johansson and Channing Tatum. We filmed several scenes but only ended up in one parking lot shot. The car is on the far right of the parking lot. The next year I was contacted by the casting company if I was interested in another movie with Nicholas Cage and Christian Bale. That movie just released on the 18th and I was happy to see my car made it on screen for about a half a second, LOL. Again, on the far right, out of focus, but that Sea Blue color jumps out at you. The movie is “Madden” and is showing on Prime. Anyway, I guess I never thought about all the cars you see in a movie or tv series are “cast” for a role. The pay isn’t bad either, but I won’t get rich doing it. There were several peeps there saying they had worked Stranger Things. A few of them are regulars and travel around a bit doing these things.


r/beetle • • 1d ago

Slammed

Thumbnail
gallery
127 Upvotes

r/beetle • • 1d ago

Finalized My Bumper Hole Plugs, Finally Ready To Go!

52 Upvotes

After much trial and error, finally got these to fit how I want! Very tight and rather satisfying snap on install now. Developing production ready parts has proven to take way longer than i thought it would lol, but I'd rather be slow than make a bad part! They are printed in ASA-CF, the carbon fiber infused in there gives it a nice matte finish and very faint oem plastic looking texture so no painting needed anymore unless you want to take the finish to the next level. Anyways, giving the same treatment to the other parts I've been prototyping and hope to make a final post about those soon too!

If you are interested!- https://www.ebay.com/itm/407379777868


r/beetle • • 1d ago

Luggage rack for ‘78

Post image
74 Upvotes

Does anyone make a deck luggage rack for a 78 super beetle convertible? I love the look but struggling to find one…


r/beetle • • 20h ago

Solex 30 31 tapping fuel inlet

5 Upvotes

I am planning on taping my fuel inlet as a safety precaution. My only question on it is when I install the screw in fitting should I apply any sealant to the fitting before tightening it? Either a permatex type thing or tape?

Thanks!


r/beetle • • 23h ago

72 super is the control arm inner bushing suppose to do this side n side play?

7 Upvotes

Replacing the sway bar bushing as well


r/beetle • • 23h ago

Cylinder 1 and 3 not firing.

4 Upvotes

Hey everyone. Newbie here. I need help. This is my first ever air cooled and first time really getting into doing anything aside from relatively superficial engine modifications.
 
This is my 1966 beetle with a 1500cc engine. Prior to installing all new brake lines, fuel tank and soft fuel lines it was running well. Now it seems to be running on 2 cylinders and I cannot sort it out. Both 1 and 3 seem to not be firing.
 
I have attached a video of a drop test. If this helps anyone glean anything. There is a small amount of black smoke on when the throttle is applied and there is a smell of unburned fuel. I put in a new set of plugs and 1 and 3 were immediately wet and black.
 
The plugs, wires, rotor and distributor cap are all new. The valves have been adjusted to .006 in. I adjusted the point gap. Prior to installing any of these items I blew out the plug holes and tested the spark on every wire. To confirm they worked. I also confirmed the firing order as 1-4-3-2 on the Bosch 009 distributor
 
Any help would be greatly appreciated. I am feeling pretty defeated currently.


r/beetle • • 1d ago

Lesson learned the hard way, later transaxles with fine teeth cannot handle more than the stock torque for long periods of time, farewell 4th gear 🫡

Post image
21 Upvotes

r/beetle • • 2d ago

A "beetle" featured on the California DMV license renewal course

Post image
210 Upvotes

The use of AI, desecrating the image of our beloved beetle. Thoughts?

Every single image on the license renewal course is AI generated.

Remove if not allowed, just thought I'd share this abomination with my fellow classic vw bug enthusiasts.


r/beetle • • 1d ago

Shortening the 3rd Ram Chassis to fit the 70's VW Bug.

4 Upvotes

r/beetle • • 2d ago

Taillight help

3 Upvotes

I have a 1970 Beetle with the american style taillight lenses. I got some euro lesnes just because they look better and aren't scratched up from 56 years of use. On my car, the bulb order from top to bottom is the bulb that lights up when the taillights are on, then the turn signal and brake pedal light, then the reverse light. How can I get the turn signal to align with the orange taillight lense peice?


r/beetle • • 2d ago

Looking for mechanic in Kansas City area.

3 Upvotes

Hello y’all

Looking for some local with my bug. Anyone got any ideas? The local VW group isn’t meeting until Spring.


r/beetle • • 2d ago

Mind making sure we did our research correctly?

Thumbnail
gallery
21 Upvotes

My lady has a 1974 super beetle here in the US. We have been going through the brakes and the last thing on the list for now is brake drums. We have used the stock parts from jbugs and autozone and so far everything has gone on great! The brake drums are special orders though and due to their size and weight returning them if they end up being wrong is not a possibility. As they are a few hundred bucks we would really like to make sure we get this right the first time. Included are photos of what our setup looks like as well as the old drums and links to what we have found for the new ones. Could you guys take a minute to look over our work and suggest any better options or changes you'd make? Thanks!

Rears: https://www.jbugs.com/product/113501615JI.html

Fronts:

https://www.autozone.com/p/duralast-brake-drum-3818/758037?searchText=Front%20brake%20drun


r/beetle • • 3d ago

Got my 87' back after 6 months! It broke 5min later on the road.

Post image
320 Upvotes

Went to the shop to get my car after months fighting with my mechanic, had to fix an oil leak and some other things. My mom insisted on driving, and on the way home, 5min into the road, she hit a bump and the car just turned off.

It tries to turn on, it has electricity, I guess something disconnected? I really need help to identify what could have happened and try to fix it myself.

It was my dad's beetle, he got it in the 90's! He passed away and I'm the only one in my family that loves beetles and wanted to keep this beauty ❤️


r/beetle • • 3d ago

Manifold restrictor gasket

Post image
10 Upvotes

Do you guys run this manifold restrictor gasket on your cars? It's the one that goes between the exhaust and the heat riser tube on the drivers side.

I recently rebuilt the motor on my ghia and I re-used the single port intake manifold that came with the car. The heat riser tubes were completely clogged, so I cleared it out as best as I could with an old clutch cable attached to a drill. I'm sure the passage is still pretty restricted compared to when it was new, but it seemed good enough. After running the engine, I noticed what seemed like excessive condensation/frost on the intake manifold under the carb.

I had to pull the engine back out to deal with a pushrod tube oil leak, and I'm wondering if, while I have the engine out, I should replace the restrictor gasket with the larger opening to help my condensation issue. I've noticed a lot of the gaskets sets you can buy don't even come with a restrictor gasket.


r/beetle • • 3d ago

Carbs for sale

Thumbnail
gallery
101 Upvotes

Downsizing motors, have a set of Weber 44 IDF’s for sale, can ship anywhere. $300 for the pair - If you’re in Idaho I have a 2276 long block that’s up for grabs as well.


r/beetle • • 3d ago

Fuel Hose and Filter

2 Upvotes

I’ve seen varying information on the original fuel hose ID, ranging from 5mm to 5.5mm; what is the truth, and can domestically sourced 3/16” or 1/4” ID hose be safely used with clamps?

Will 3/16” ID hose fit over the vw fuel barbs? Most of the common filters I‘ve seen are 1/4”; can 3/16” fuel hose be expanded into those?


r/beetle • • 5d ago

R.I.P. Mildred and more

Thumbnail
gallery
606 Upvotes

VW Engine fires are no joke! F*** Mildred 🤣


r/beetle • • 3d ago

74 Super Beetle

4 Upvotes

What would a sell a 74 Super beetle with 98,000 miles on it but hasn’t ran in 2 yrs with new motor


r/beetle • • 4d ago

Help Identifying - New to this

Thumbnail
gallery
19 Upvotes

Can you help me identify the type of carburetor and distributor my car has and so on?
And if this guide is appropriate for me to use in trying to do a tune up? http://vw-resource.com/34pict3.html

Car is a 74 super beetle. Runs ok once it is warm (holds and idle and such) but I need to hold a little bit of throttle for it to stay running when cold. Also, when I give it a lot of throttle in first and second gear, the engine coughs and sputters and tries to die like it’s starving for fuel or something. Added a couple photos of the carb without the filter because I wasn’t sure if that flap is supposed to close or anything with throttle. It seems floppy.

I have gaskets and a feeler gauge to do valve adjustment this weekend. Was going to change spark plugs then too.

I changed the oil recently and that went fine.

(Secondary, what is this hose by the oil filler cap?)