r/bioengineering • • 5h ago

Will my GRE scores help my application for BME PhD much

Post image
1 Upvotes

Disclaimer: NOT meant to be a flex post, I'm genuinely asking.

I read online that GRE scores can help offset a bad UG GPA (mine were pretty bad, barely meets the minimum, but my major was not BME). I did a Master's before and got a 4.0 at a school without plusses and minuses. Am doing a second Master's now (at a T20 school for engineering) and currently have a 3.85 (mix of A's and A-'s). I got good feedback on my SOP's (asked the PhD advisor at my school to review them). I think my PI wrote a good letter of recommendation for me (I say "think" because I haven't read it). I have two publications where I'm mid-author; one of them is nature communications.


r/bioengineering • • 15h ago

PhD (biomaterials/food by-products) moving into industry R&D in Canada (Ontario): advice on breaking in?

Thumbnail reddit.com
1 Upvotes

r/bioengineering • • 19h ago

Ingegnere biomedico con 3 anni di esperienza come tecnico elettromedicale: come fare un salto di carriera?

2 Upvotes

​

Ciao a tutti!

Vorrei confrontarmi con qualcuno che abbia intrapreso un percorso simile al mio o che conosca bene il settore dell'ingegneria biomedica, perché in questo momento mi sento un po' a un bivio professionale.

Sono laureato in Ingegneria Biomedica (triennale) da circa 3 anni e lavoro da 2 anni e mezzo come tecnico elettromedicale presso una società che opera nel settore del global service ospedaliero.

Nello specifico mi occupo di:

Manutenzione programmata delle apparecchiature elettromedicali.

Collaudi di accettazione.

Verifiche di sicurezza elettrica.

Gestione amministrativa e documentale relativa ai collaudi.

Interfacciamento con personale sanitario, clienti e fornitori.

Consultazione e analisi della documentazione tecnica delle apparecchiature.

Ho accettato questo lavoro subito dopo la laurea principalmente per entrare nel mondo del lavoro, acquisire esperienza e conoscere da vicino il settore biomedicale. L'ho sempre considerato una sorta di gavetta, un punto di partenza per costruire qualcosa di più.

Il problema è che, dopo due anni e mezzo, mi rendo conto di non essere soddisfatto. Non mi piace particolarmente la mansione, mi sento spesso sottovalutato e ho la sensazione di non sfruttare minimamente le competenze e il percorso di studi che ho fatto.

Senza voler sminuire il lavoro dei tecnici, ho anche la percezione che molte delle attività che svolgo non richiedano necessariamente una laurea in ingegneria, ma siano tranquillamente accessibili a chi possiede un diploma tecnico e un'adeguata formazione sul campo.

A questo punto vorrei capire come potermi muovere.

Mi sto ponendo diverse domande:

Ha senso provare a entrare nelle aziende produttrici di dispositivi elettromedicali, magari partendo proprio dai fornitori con cui mi interfaccio quotidianamente?

Quali ruoli potrei cercare? Product Specialist, Clinical Specialist, Application Specialist, Service Engineer, Quality Assurance, Regulatory Affairs, progettazione, gestione tecnica?

La mia esperienza nel global service può essere un valore aggiunto per passare dalla parte del produttore o rischia di etichettarmi come semplice tecnico manutentore?

Ha senso riprendere gli studi e conseguire una laurea magistrale, magari orientandomi verso un settore più specifico?

Oppure, considerando che ho già quasi 3 anni di esperienza lavorativa, sarebbe più intelligente investire su corsi, certificazioni e competenze specifiche?

Non ho necessariamente l'ambizione di fare ricerca e sviluppo o progettazione, ma vorrei trovare un ruolo in cui possa crescere professionalmente, avere maggiori responsabilità e soprattutto sentire che la mia formazione ingegneristica rappresenta un valore aggiunto.

Mi piacerebbe soprattutto confrontarmi con chi ha vissuto una situazione simile: ingegneri biomedici che hanno iniziato nel global service, nella manutenzione elettromedicale o nell'ingegneria clinica e che successivamente sono riusciti a cambiare settore o ruolo.

Come vi siete mossi? Cosa fareste diversamente se doveste ricominciare?

Accetto volentieri anche consigli da chi lavora nelle aziende produttrici o distributrici di dispositivi medici.

Grazie a chiunque voglia condividere la propria esperienza!


r/bioengineering • • 18h ago

Msc medical microbiology or msc medical biotechnology

1 Upvotes

Iam planning to do either of these... So which is the better one to pursue a career in india?


r/bioengineering • • 1d ago

Brief exposure to pulsed magnetic fields supports dental pulp tissue engineering: in vitro evaluation and in vivo proof of concept

Thumbnail sciencedirect.com
1 Upvotes

r/bioengineering • • 1d ago

Upcoming Interview prep help for first time biotech job

5 Upvotes

Context: So I recently landed two back-to-back interviews for the same job. It's for an entry-level scientist position with Thermo, and the responsibilities include performing routine and complex sample preparation and analytical testing under general supervision to quantitatively measure pharmaceutical and biopharmaceutical compounds across various formulations and biological matrices. I would train on the routine operation, maintenance, and theory of analytical instrumentation alongside Standard Operating Procedures (SOPs) and regulatory guidelines (GMP/GLP). Additionally, I'd perform routine maintenance, compile test results, and verify data against SOP acceptance criteria, protocols, and product specifications to support stability and analytical testing for client drug development.

I will be questioned by two group leads. One interview with the group lead of CGT (I think that stands for "cell gene and therapy," but I could be wrong), and the other interview with the group lead of biopharmaceuticals.

Because I have recently graduated, I do not have much interviewing experience.

For what could be my first job, I am quite nervous about what the group leads might ask me. I am under the impression that I will be quizzed by the CGT and Biopharma group leads, and while I did well in my courses, I am terrified that my answers would be unsatisfactory if I am quizzed.

To be clear, I don't know for sure if I am actually getting quizzed.

I suppose my concerns are the following:

(1) What should I expect in the interview in terms of questions?

(2) How could I best prepare for them so that I am not freaking out on the spot and seem like I have no idea what's up?

(3) What are some other tips you may have for me as a newbie to the industry?


r/bioengineering • • 1d ago

Questions about Application Process - Biomedical Engineering

Thumbnail reddit.com
1 Upvotes

r/bioengineering • • 1d ago

I built an Android app that walks a human protein from gene to fold, with ESM-2, AlphaGenome and ClinVar on every residue. Looking for 15 testers.

Thumbnail reddit.com
0 Upvotes

r/bioengineering • • 1d ago

Biotech Now what??

1 Upvotes

Hi! I recently graduated from Bachelors of Applied biotechnology(Honours) degree from Conestoga college. I worked 4 months at Gay Lea QC tech(Co-op). Also, I hate this program overall because Studing large chuck of molecular Biology and cell biology none of our cohort accepted in to biologics. That’s real unfortunate and real flaw of the program. Now I am seriously questioning my choice because this is only one degree I saw where diploma people are getting more leverage than the bachelor’s students. I am trying to get into some chemists or QA positions that pay well but none of them does. 6 figure from this job seems almost impossible. Thus, I am also thinking to pursue RA certification at the Seneca college. I checked the Seneca RA certification reviews and it genuinely made me so worried and I am again questioning myself. I am now planning to take masters from Guelph because Masters at University of Toronto is way too expensive and I don’t like York TBH. It just collects international students and their fees for worse quality of education. Beside this on the back of my head I am wanting to do MBA from Mac master because I know I cannot get into the top MBA schools anyway. Is it too early to do MBA? Should I stay inside the industry right now and take some courses part time? What are the courses should I take? What path should I take? Please any honest suggestions will be highly appreciated! Thank you!


r/bioengineering • • 2d ago

MBBS student seeking clarity on a computational personalised cancer immunotherapy project

Thumbnail reddit.com
1 Upvotes

r/bioengineering • • 3d ago

CNXU launches human collagen initiative

9 Upvotes

Conexeu Sciences has just launched a dedicated human collagen initiative at its Vancouver R&D facility. This work will continue to expand its proprietary CXU regenerative tissue platform into medical aesthetics.

The move targets the rapid surge in demand for soft-tissue restoration driven by aging and GLP-1 weight-loss medications. This is a market gap that traditional volume-filling dermal fillers were not designed to solve.

CNXU remains on track for its planned FDA 510(k) submission in Q1 2027 for its lead device candidate, Ten Minute Tissue. This will initially target wound care, which helps establish the regulatory foundation for future human-collagen aesthetic products. If they get approved they will have first mover advantage in a market with a massive gap.


r/bioengineering • • 4d ago

SHPE Interview Medtronic Internship

4 Upvotes

Hi,

I moved on to second round at Medtronic from SHPE conference on Oct. 31, but have not yet heard back from any hiring manager for a final round interview. (I did receive the placement survey pretty early after the conference). Is anyone else in the same boat/has already heard back? Does anyone who got a Medtronic interview at SHPE last year know anything about the likelihood of getting a final round interview/offer from this stage? Please help, not sure if I should keep checking my email so religiously.

Thanks!


r/bioengineering • • 3d ago

How is IIT Jammu for pursuing a PhD at Department of Biosciences and Bioengineering?

1 Upvotes

As a newly established IIT, is it worthy pursuing a PhD there?

How is the Department of Biosciences and Bioengineering, does anyone know specifically?


r/bioengineering • • 4d ago

I’m a BMET making free “how it works” videos on medical devices. Looking for honest feedback

Thumbnail
reddit.com
2 Upvotes

r/bioengineering • • 4d ago

Biomedical engineering Internships

Thumbnail reddit.com
1 Upvotes

r/bioengineering • • 4d ago

How is the Department of Biosciences and Bioengineering, IIT Guwahati for pursuing a PhD?

Thumbnail reddit.com
1 Upvotes

r/bioengineering • • 4d ago

Premed or CS ECs?

Thumbnail reddit.com
1 Upvotes

r/bioengineering • • 5d ago

Undergrad Major Advice?

3 Upvotes

I'm a first-year undergrad student at a fairly prestigious public university in the U.S. I'm the type to plan ahead and, after a period of career deliberation, have decided that some role in R&D (preferably with the ability to move into project management later in my career) within the pharmaceuticals industry is most interesting to me. This particular type of career stands out to me because of the typical work environment, mission, and, yes, the pay.

I am currently enrolled in the liberal arts & sciences college at my school (angle was a B.S. in Biochem), but--because of my career interest epiphany--I'm considering a transfer to one of two different programs my school offers.

The first is my school's engineering program. If I did this, I would plan on majoring in chemical engineering with a number of electives geared at drug delivery systems and other things that would tailor my roadmap to a pharmaceuticals/biochemical concentration. We tend to rank within the top 10 in the country for chemical engineering, so it seems like a great opportunity. Chemical engineering also seems way more flexible, so I would be keeping my options open for other industries. I think the cons to chemical engineering are just in how much it caters to industries I know I don't want to work in (oil, plastics, etc.)--but that also speaks to how versatile it is.

The second is my school's undergraduate pharmacy program. This stands out to me because my school is one of very few that offers an undergraduate Pharmaceutical Sciences degree, and it's already so specific to the industry. The classes themselves include technical aspects like MedChem as well as insider knowledge on the pharmaceutical industry. The one drawback to this program is that it seems slightly more geared to the clinical side of things--as in people seeking PharmDs, but I think it works for my projected path just as well.

I guess what I'm most lost on is what differentiates the specific day-to-day duties of someone with each background? I know I want to work in a lab, but I lack the clarity on what each degree would make employers expect of me. I'm looking at some internships but it's difficult because I'm an underclassman with very few classes that are relevant to this career under my belt. I've tried doing my own research but most sources just have very general information.

Some other thoughts: I understand I will most likely have to do a PhD (or that it would at least help me); I have all of my introductory calculus requirements completed from AP credit, so that makes the switch to a math-heavy major a little easier; I mention the prestige of my university because I think it's important to understand that any program I matriculate into will enrich my resumé; finally, there's always the chance that I stay in the liberal arts chemistry program--so if anyone with that background cares to share their experiences I would appreciate it.


r/bioengineering • • 5d ago

Hi , I’m a high school student also aspiring biomedical engineer and a AI enthusiast, MUN delegate . I would like to share with you my prepatory school graduation project ❤️✨

Thumbnail
gallery
0 Upvotes

r/bioengineering • • 6d ago

Biochemical engineering masters degree

3 Upvotes

Hi guys, I'm finishing my electrical engineering degree next year and I really wanna switch to biochemical engineering. I'm switching cause I'm in love with biochemistry and I just can't picture myself doing anything else. I regret enrolling in electrical engineering, and I feel like I wasted four years of my life. More precisely, for me, it’s the end of the world. If I had completed my undergraduate studies in biochemical engineering, I would have had a better GPA, scholarships, and a much better chance of getting into a master’s or doctoral program. Do you think I made a huge mistake?That it’s too late and that I can’t succeed? I'm so stressed and anxious, it feels like I’ve wasted my only chance for a proper education and a normal life.


r/bioengineering • • 7d ago

Cryropreservation specialist contract employee at BMS vs FTE lab technician at genscript(mainly focused on making agar plates)

Thumbnail reddit.com
1 Upvotes

r/bioengineering • • 7d ago

Recommendations for short BME related projects for enhancing skills

Thumbnail reddit.com
1 Upvotes

r/bioengineering • • 8d ago

Aiuto ingegneria biomedica

2 Upvotes

ciao io sono al quinto anno delle superiore e faccio informatica e telecomunicazioni, pensavo di fare ingegneria biomedica. Potete dirmi un po l'esperienze e le diffoltà? è davvero tanto difficile o si può fare? Matematica è davvero impossibile e anche fisica?