r/drywall • • 17h ago

Drywall Seams - Why so common?

Post image
93 Upvotes

I've now been to several client's houses, some of them ranging between $450,000 and $1,500,000. And in the bigger houses with 2 stories, you can see the seams/edges in the Drywall after a while. Why is this so common? I would say 1-5 houses have these...and the owners don't seem to care. Some of the houses were brand new and you could see the seams within a few weeks after the owners moved in. What's the solution here to prevent, and if it were you, how would you fix this?

Thanks.


r/drywall • • 17h ago

Mud or rip out and cut again?

Thumbnail gallery
44 Upvotes

r/drywall • • 6h ago

How would I fix this crack?

Post image
2 Upvotes

Over the years our place has settled and formed a crack. Is this something I could just stick some spackle in the crack and sand and paint? Since there’s texture on the wall, I figured it would be best to just fill the crack rather than cut out the drywall and watch. Is that correct?


r/drywall • • 7h ago

Any recs on how to patch this edge?

Post image
1 Upvotes

Looks like the drywall tape may be falling off here. Should I rip it all off and add new tape and mud and sand?

Or maybe it’s still salvageable if I stick some mud behind the existing tape?


r/drywall • • 14h ago

Ceiling Gap…

Thumbnail gallery
3 Upvotes

First time drywalling…

When cutting out existing ceiling drywall to expose a beam, the cut got away from me.

One side is nice and tight, the other tapers from .75-1.75.

How should I got about filing the larger gap on the inside angle? Directly above is duct work if it makes a difference.


r/drywall • • 15h ago

How many bags?

Post image
3 Upvotes

Say I forgot track of my ready mix bags, (I did) and every time I run to the small hardware store for more easy sand, the guy always busts my balls. This is approx 2/3 of my 1500sq ft basement. How many easy sand bags would a contractor estimate? Approx 7' walls, 13-14' ceiling width.


r/drywall • • 9h ago

Peeling Paint

Thumbnail gallery
1 Upvotes

r/drywall • • 10h ago

Hey what’s the best way to fix this crack in my closet? It’s too small to try to tape without removing the trim

Post image
1 Upvotes

r/drywall • • 10h ago

I think I created a triple moisture barrier and broke another barrier at the same time - facepalm - help

Thumbnail gallery
1 Upvotes

I’m in Colorado remodeling basement bathroom. When I demoed the shower, there was blown in insulation and thick poly behind the exterior wall. The insulation had fallen down so I added faced fiberglass insulation, then new poly, and hung the backer board.

Luckily we have not red guarded yet, so there is still time to correct. Should I remove the poly and faced fiberglass insulation?

I read that I should remove the blown in insulation and just add Rockwool Comfortbatt on all three walls (exterior concrete wall, and two interior shower walls). Then use redguard as the only moisture barrier.

Second issue (maybe): on my bathroom (non-shower) wall that against the exterior with concrete on the other side, I installed a new water shutoff for my hose bib outside. To do this we had to cut the poly and planned to install an access panel. Since this panel is in the bathroom, do I need to worry about moisture now getting back there since I cut the vapor barrier to install the shut off?


r/drywall • • 15h ago

How do I do this?

Thumbnail gallery
2 Upvotes

I have another section of my house where the ceiling meets the wall at a 45° angle. How do I create a curved joint instead of having it angled?


r/drywall • • 17h ago

Sanding screens

2 Upvotes

I’m a homeowner who does drywall around the house and when I use screens I tend to get mesh lines left behind using 220 grit. I generally only use them on a pole sander, but am I doing something wrong technique wise? Do I need to go even finer?


r/drywall • • 14h ago

Cracks

Thumbnail gallery
1 Upvotes

r/drywall • • 20h ago

Wall/ceiling separation- how to repair

Post image
3 Upvotes

Truss lift caused one of my walls to separate from the ceiling (according to structural engineer) but how do I fix it? Do I cut out the loose debris, prefill with hot mud, then tape with all purpose?

I’ve seen some mentions on here of ultraflex no-coat - but when I google it just looks like tape? I’ve also seen vinyl L-bead recommendations but I’m not sure what to do with that? Crown molding is going in next week but I would still like to fix it because the furnace and HVAC are in a closet behind this wall. It starts at one corner of the wall and goes for about 6’. This part is the worst of the separation.


r/drywall • • 14h ago

Fixing drywall backside before mounting?

Thumbnail gallery
1 Upvotes

First time drywaller here.

12ft drywall delivered with a slight crack. Got a bit worse after hauling it downstairs, but didn’t crack all the way through the front…also took a little brown paper off when cutting it down.

What should I do before I hang it? Shellac it? Nothing? I haven’t gotten to mudding yet so I don’t have anything mixed up yet.


r/drywall • • 15h ago

fixing drywall corners?

Thumbnail reddit.com
1 Upvotes

r/drywall • • 15h ago

What to do about these paper wrinkles?

Thumbnail gallery
1 Upvotes

New homeowners here, looking for advice on our walls. The previous owners painted over old wallpaper, and was peeling off at the corners.

Brave us, decided to remove the wallpaper using steam and wet towel. while removing, we accidentally took off some of the drywall’s outer paper layer. We sealed the exposed areas with two coats of Zinsser GARDZ and are now skim-coating with general-purpose joint compound.

I was hoping the sealant would prevent exactly this. But now the paper wrinkles are showing from the first skim coat.

Any suggestions?


r/drywall • • 20h ago

How do I fix it? Solo mom/complete beginner

Post image
2 Upvotes

My 5yo managed to rip our towel holder out of the bathroom wall, leaving this damage.
I’ve never repaired drywall before and have absolutely no experience with home repairs.
Can someone please explain exactly what I need to buy and how to fix this step by step, as if I’m five?

Edit: i do not want to put the towel holder back + when I touch around the hole the wall is soft. So I just want to cover the hole so it is invisible and blended


r/drywall • • 17h ago

Seeking advice

Thumbnail gallery
1 Upvotes

I've recently put in a new French door into a space that had an 8 ft slider. The drywall patch seems not to match the thickness of the existing wall. I should also mention the house was built in 1900. When the hole was open I could see wood lath followed by 2 layers of drywall. Should this just be taped and patched with gradual feathering? Is there a better way or should I look for ways to disguise this with some kind of other wall treatment?


r/drywall • • 18h ago

DIY - How to finish this wall

Post image
1 Upvotes

r/drywall • • 18h ago

Are Drywalls better for acoustics in a home theatre ?

1 Upvotes

How do they compare/differ from plastered bricks for acoustics ?


r/drywall • • 21h ago

Plasterboard tape blown under tiles in bathroom

Post image
0 Upvotes

r/drywall • • 1d ago

Can’t get smooth mud

Thumbnail gallery
5 Upvotes

What causes these wavy lines on the mud when it dries? I keep getting wavy lines that I can’t sand away. If I run my fingers across, it feels smooth and doesn’t feel like a ridge and even if I sand it, they don’t go away.

How can I prevent these wavy lines? I don’t wanna paint over them and then be able to see them through the paint.


r/drywall • • 23h ago

Drywall residue on new engineered hardwood floors

Thumbnail gallery
0 Upvotes

r/drywall • • 1d ago

What air compressor do you recommend for texturing small to large drywall patches?

1 Upvotes

I can’t decide which air compressor would be ideal for my needs. I’m in the process of landing my first customer as a new drywall patch repair business owner. I’d like to use the EZ-Pro texture sprayer for applying texture to my repairs.
I’m leaning toward the Makita MAC210Q, but I’m also considering compressors from brands like Rolair and California Air Tools. Any suggestions or recommendations?