r/drywall • • 2h ago

First time drywalling. How did I do?

Thumbnail gallery
73 Upvotes

This was my first time drywalling. I had to rip out a half wall railing at the bottom of my stair landing in order to replace the sagging osb landing. I then used AI to help design a taller wall that would function well to keep the cat from jumping over, and incorporate a pet gate, which I had to modify.

should I cut the bottom of the drywall so it’s not touching the floor, in case it absorbs a water spill or something? The flooring is being replaced as well, and I didn’t know that drywall shouldn’t touch the floor for moisture reasons.

I ended up having major paint bubbling in an area that I had to skim coat the wall with mud, and had to rework the wall and repaint. Not sure why I had such bad bubbling of what seemed to be the primer right after painting. What causes this?


r/drywall • • 4h ago

What could I use to scrape this glue off it’s a block wall that got skimmed with compound and glued a backsplash later on… or should I just try and knock the high spots down and skim out the entire wall relatively thick

Post image
14 Upvotes

r/drywall • • 1h ago

First time doing drywall, how did I do?

Post image
9 Upvotes

r/drywall • • 23h ago

Ceiling Gap…

Thumbnail gallery
4 Upvotes

First time drywalling…

When cutting out existing ceiling drywall to expose a beam, the cut got away from me.

One side is nice and tight, the other tapers from .75-1.75.

How should I got about filing the larger gap on the inside angle? Directly above is duct work if it makes a difference.


r/drywall • • 52m ago

First time drywalling.

Thumbnail gallery
2 Upvotes

Bought a house with an unfinished basement. The livable side is 25x30. Adding two bedrooms and the living room area. Completely gutted the basement, all new electrical, had to modify some HVAC, insulated to r29. Been at the drywall stage in the living room area for a few weeks while building out the bedrooms. Decided to tackle some mudding and learn as I go. I'm sure I fucked up the drywall application here and there but it is what it is. How does this look so far?


r/drywall • • 4h ago

Old wall Opening in Ceiling. What to do.

Thumbnail gallery
2 Upvotes

I have taken out a non load bearing wall and need to seal the ceiling. The height does not match each other on either side.

Thinking about cutting it back to the ceiling joists and place some nailer on each side but don’t want to make it worse.

Any thoughts would be greatly appreciated.


r/drywall • • 15h ago

How would I fix this crack?

Post image
2 Upvotes

Over the years our place has settled and formed a crack. Is this something I could just stick some spackle in the crack and sand and paint? Since there’s texture on the wall, I figured it would be best to just fill the crack rather than cut out the drywall and watch. Is that correct?


r/drywall • • 2h ago

A so called plasterer

Thumbnail gallery
1 Upvotes

r/drywall • • 2h ago

Drywall damage

Post image
1 Upvotes

How would you fix the dry wall? I need it fixed enough so I can re install the grey vinyl.


r/drywall • • 3h ago

Will it hold?

Thumbnail gallery
1 Upvotes

Hey. I'm going to try to DIY a dry wall. I want to make 2 rooms out of 1 bigger room. Currently i see two options given the existing layout (see images). A couple people already said that the angled one will hold better structurally, and the straight one will be too flimsy. What do you think is a better option?

It will be a simple one layer wall that shouldn't experience any stress except for it's own weight and a cheap door. The problem is that the walls and ceiling are also made of drywall, and there is some empty space behind it, because it covers the brick wall, like on the image. The question is, will the drywall hold if I use a generous amount of a depicted drywall mount to hold the new wall against the old wall?

P.S. the hight if the room is 2.68m.


r/drywall • • 5h ago

Any advice on fixing the settling on this drywall corner?

Post image
1 Upvotes

The house has settled over the last 20 years and this corner has always bugged us

I was thinking I could just get a drywall knife and cut it flat and then mud and sand and paint. Any other tips on how to make it look better?


r/drywall • • 16h ago

Any recs on how to patch this edge?

Post image
1 Upvotes

Looks like the drywall tape may be falling off here. Should I rip it all off and add new tape and mud and sand?

Or maybe it’s still salvageable if I stick some mud behind the existing tape?


r/drywall • • 18h ago

Peeling Paint

Thumbnail gallery
1 Upvotes

r/drywall • • 19h ago

Hey what’s the best way to fix this crack in my closet? It’s too small to try to tape without removing the trim

Post image
1 Upvotes

r/drywall • • 19h ago

I think I created a triple moisture barrier and broke another barrier at the same time - facepalm - help

Thumbnail gallery
1 Upvotes

I’m in Colorado remodeling basement bathroom. When I demoed the shower, there was blown in insulation and thick poly behind the exterior wall. The insulation had fallen down so I added faced fiberglass insulation, then new poly, and hung the backer board.

Luckily we have not red guarded yet, so there is still time to correct. Should I remove the poly and faced fiberglass insulation?

I read that I should remove the blown in insulation and just add Rockwool Comfortbatt on all three walls (exterior concrete wall, and two interior shower walls). Then use redguard as the only moisture barrier.

Second issue (maybe): on my bathroom (non-shower) wall that against the exterior with concrete on the other side, I installed a new water shutoff for my hose bib outside. To do this we had to cut the poly and planned to install an access panel. Since this panel is in the bathroom, do I need to worry about moisture now getting back there since I cut the vapor barrier to install the shut off?


r/drywall • • 23h ago

Cracks

Thumbnail gallery
1 Upvotes

r/drywall • • 23h ago

Fixing drywall backside before mounting?

Thumbnail gallery
1 Upvotes

First time drywaller here.

12ft drywall delivered with a slight crack. Got a bit worse after hauling it downstairs, but didn’t crack all the way through the front…also took a little brown paper off when cutting it down.

What should I do before I hang it? Shellac it? Nothing? I haven’t gotten to mudding yet so I don’t have anything mixed up yet.