r/esp32 • • 3h ago

I made a thing! Upgraded my daughter's writing device by hacking apart a 7-inch ESP32 board

Thumbnail
gallery
54 Upvotes

A while back, I built my daughter a writing device using a Raspberry Pi, a keyboard, and a 7-inch LCD in a 3d printed chassis.
I’ve been experimenting with different hardware configurations lately, and figured she deserved an upgrade!

The hardware
This build uses an ESP32-8048S070 7-inch devboard, as it had 16mb of ram along with wifi for document backup. But I did some... surgery to have it fit in the chassis I envisioned. I separated the LCD panel from the board, half expecting to destroy the screen in the process. Then I cut away portions of the PCB that weren’t populated with components or traces. The screen is held into place in the lid with 4 press-fit magnets, covered by a soft leather upper.

Enclosure: A slimmer shell with the electronics and wiring tucked inside. No more externally routed cables! Files available here.

It all came together really nicely, and I think it looks great in clear.

Keyboard: Salvaged keyboard internals from a Bluetooth keyboard, reused in the new chassis.
Power: Rechargeable battery pack, keeping the device completely portable. I ordered a few to get one that stops powering the device when the button is pressed. Most don’t, so sourcing a slim one was tricky.

Frimware
The original device ran Linux on a Raspberry Pi. This version runs bare-metal firmware (try it yourself) on the ESP32, making startup roughly 20x faster.
It also has quite a few new features:

  • Spellcheck with correction suggestions. Didn't use Hunspell, as it takes too much storage. Instead rolled my own using a Trie of 50k most common words (~100kiB)
  • Google Drive backup so she doesn’t lose her stories
  • Customizable themes (most important feature in her eyes)

I transferred all her existing stories over from the original device, so she could pick up exactly where she left off.

She’s been super excited about the upgrade since she saw me working on it and now I get an enthusiastic playtester!

A little about the bigger project
What started as a birthday present for my daughter has turned into an attempt to develop an affordable, distraction-free writing device called the JustType Leaf.

I’m building a waitlist at https://justtypeleaf.com/ to gauge interest before committing to a manufacturing run of 1,000+ units. If this is something you’d be interested in, signing up would really help!

Happy to answer any questions about the build!


r/esp32 • • 11h ago

Hardware help needed need help with connecting sd card reader to esp32

Thumbnail
gallery
28 Upvotes

hello its my first time messing around with this, ive checked my wiring plenty of times and i even changed the board, the reader and the cables i also changed cs to d4, d12 any ideas?


r/esp32 • • 18h ago

Hardware help needed Connection external antenna to ESP32 C3 supermini.

5 Upvotes

Hello :)

Basically I have this ESP32 C3 super mini V1 board from Diymalls and I need to use an external antenna with it, but after doing some research I found out that I have to modify the capacitor so the antenna is used instead of the onboard one, but I can't seem to find what exactly do I have to do or how to modify it. So does anyone know what do I have to do or have a video that shows how to do it?

Thanks.


r/esp32 • • 1h ago

Hardware help needed I want to make a guitar effects processor using esp32 and have a question about 6.35mm jack connections

0 Upvotes

I am going to use wires, not a pcb, but i have no idea as to how to connect the properly. I know that i will need to add components in-between esp32 and input/output, but have absolutely no idea as to what and where.

To be clear I am going to make it use lv2 sound plugins, just like guitarix does, so that i have a portable preamp with the same settings as my pc setup.


r/esp32 • • 6h ago

Hardware help needed I want to make a smart traffic light system model that turns on depending on the number of cars in the road and if no cars the traffic light stays red and so on

Post image
0 Upvotes

I got these

I have breadboard , jumper wires and led

I just want the connections

First time using an esp32

I want to hook up the camera with yolo so it detect how many cars and then turn to green light for a specific amount of time set in the code

I’m ok to keep it plugged to my laptop if my esp32 cam wasn’t that powerful to run locally

Why does the camera have 2 parts and how will I connect everything and hook yolo with it

Thanks in advance


r/esp32 • • 8h ago

I made a thing! Crypto Miner Desk Toy

0 Upvotes

Has anyone really made anything useful with these little crypto miners? I soldered a little amp and speaker. It works like a pretty good screen / tv. I did have to process the video on my computer instead of the devices itself. It also gets notifications.