r/f150 • • 6d ago

Weekly "Should I buy" Megathread

1 Upvotes

Post all F150 buying inquiries here


r/f150 • • 2h ago

Replacement Complete! 2023 Lariat

Post image
27 Upvotes

After my wreck back in July and totaled truck, I’m finally back where I wanted to be. 2023 Lariat FX4 with 3.5 EB. Took weeks of searching to find the exact replacement truck I wanted. Only real difference is this one was later off the line in 2023 so it has the auto stop/start (meh) and heated steering wheel (score!!). Got clear PPF all over the front, hood, etc and colored rocker panels done last week, just in time for snow.


r/f150 • • 20h ago

First truck! 2021 Lariat Powerboost Hybrid

Post image
89 Upvotes

Wanted a truck for many years, finally found one with the options I want at a reasonable price. It has every option (502A, Unleashed sound, all the tow add-ons, etc...) and has a very mint-y interior.

Loving driving it so far. Surprisingly fast off the line. Wasn't expecting it to be quite so quick.


r/f150 • • 1d ago

Got my FP700

Post image
218 Upvotes

I love it, it pulls amazingly.

What aftermarket mods do you guys recommend?

EDIT: For those who don’t know, the FP700 is the racing version of the f150. It’s a supercharged coyote with roughly 700-715hp. Also, I’m asking what are general recommendations for performance mod recommendations along with anything else that you guys think is worthwhile.


r/f150 • • 5m ago

Still getting split heat/AC after replacing Blend door actuator

1 Upvotes

Hey all,

I have a 2018 F150 Platinum where the passenger and rear climate control won't adjust. Looked online, saw a bunch of recommendations to replace blend door actuator. Took it to a mechanic who diagnosed it as the blend door actuator but wanted $1500 so I decided to replace it myself. Purchased corresponding part, pulled apart the dash, replaced the actuator behind the passenger side dash, and the climate control temp adjusting on those vents still won't work.

Anyone else ever have this issue? Any tips on where to proceed next to troubleshoot?


r/f150 • • 20m ago

Weird squeak from buddies truck

1 Upvotes

2013 3.5 f150 weird squeak while warming up on cold start, stops once it’s warm. My 2012 3.5 makes a similar sound under heavy acceleration and I just assumed it’s an exhaust manifold leak but his does it at idle when cold. Is it a leak or is it something else?


r/f150 • • 4h ago

2016 F150 crew. Clunk and rubbing noise.

Thumbnail
gallery
2 Upvotes

Thanks for any advice or info. Pics are of both sides. On jack no load. On ground under load. I’m not sure what any of those parts are called other that. The controls arms, ball joints and break things. Some rubbing when turning. Mainly sharp turns to the right. Parking spot or onto streets. As for the clunky sound. If I go over a manhole cover that’s an inch or so below the pavement or any off road, it’s sounds like a clunk or something’s loose. I had it up on jack to check. Everything it tight. Not sure if shocks are bad, see no leaking or build up like it was leaking. Had it at the dealership to have the front drivers side front looked at. That sounds like where most of it is coming from. Half a day later they say that can’t find anything or here any clunk. When I picked up the truck. I took the advisor for a drive, took him around a few turns, took him over by where my work is, and out of the parking lot, made the sounds. He claims they didn’t hear none of that on their test drives. I crawled under, took some pictures, and seen it rubbing somewhere. I say somewhere cause I don’t really know what the parts are called.


r/f150 • • 52m ago

Turbo fitting coolant leak

1 Upvotes

2013 Ford F150 Limited, 3.5l, 122k miles. I have a turbo fitting that I noticed a leak on, how urgent is it to repair.
I know there are several other parts to consider replacing during the job, any advice is great.


r/f150 • • 1d ago

New to me 2025 Powerboost King Ranch- Just got tint, next is some new tires and level kit.

Thumbnail
gallery
75 Upvotes

What do you guys recommend for tires, size and brand? I am thinking 275/65 R20s SL, I want a more aggressive and larger look without sacrificing too many sweet mpgs.


r/f150 • • 3h ago

Need some tips for supercharging

1 Upvotes

Im looking at supercharging a 2026 f150, i like the VMP whipples but the ones made for 2026 model are the 3.8 liter and i feel like thats too much to daily drive the truck, i like the 3.0 liter ones because i feel like thats a happy medium for it but VMP has those marked as 2020 models, since its the same 5.0 V8 motor can i still use that supercharger on the 2026 model f150?


r/f150 • • 1d ago

F-150 10R80 Harsh 7-8 Shift: The CDF clutch drum bushing slip teardown & why valve bodies get scored

Thumbnail
autozonic.com
92 Upvotes

If your 2017–2022 F-150 with the 10R80 10-speed has started kicking violently on the 7-8 upshift, slipping into neutral when rolling to a stop, or delaying 2 to 3 seconds before banging into Reverse, do not let a shop immediately sell you a $7,500 reman unit or just clear shift adapts and send you home.

What you are looking at on the bench is the CDF clutch drum assembly. Ford pressed a brass/bronze sleeve bushing into the center cylinder bore to seal hydraulic fluid pressure across three clutch circuits (Clutch C, D, and F). On the factory original drums, there is no physical retaining shoulder or machined lip behind that sleeve.

Under constant thermal cycling and high line pressure (especially when towing or driving in hot climates), that center bushing creeps and walks backward along the hub. Once it migrates just a few millimeters, it blocks the hydraulic fluid feed ports and begins shaving the internal Teflon sealing rings.

Fluid that is supposed to firmly clamp the clutch packs starts bleeding past the seal. The transmission control module (TCM) detects the slip, commands max line pressure to compensate, and literally slams the clutch pack home—that is the bone-jarring kick you feel through the floorboard.

The real danger is waiting too long: once that bushing walks, fine bronze and Teflon debris get pumped directly into the main control valve body. If caught early while it is just an occasional firm shift, replacing the drum and rings saves the transmission. If you drive on it until it drops into neutral at red lights, those metal fines score the aluminum spool valve bores, requiring a brand new valve body or a full rebuild.

Two practical field checks you can do right now:

  1. Watch your transmission temp gauge. Does the harsh shift happen dead cold or only after reaching full 195°F–205°F operating temp? CDF fluid blow-by gets dramatically worse as Mercon ULV thins out at operating temperature. If it shifts fine cold and kicks hot, that points straight to hydraulic pressure loss past the sleeve.
  2. Check the fluid on the dipstick under the heat shield (passenger side of the case). Mercon ULV should be amber/light golden. If it smells burnt or has a pearlescent metallic sheen in direct sunlight, clutch friction material has already started burning from low clamping pressure.

Ford documented this in TSB 23-2250, but thousands of owners are still paying out of pocket because dealers claim harsh 7-8 hunting is just "normal 10-speed adaptive behavior."


r/f150 • • 22h ago

Blacked out or Nah?!

Post image
26 Upvotes

‘17 Platinum w/ 185k on it and a recent sabbatical had me test driving new trucks & teasing salesmen until I decided I shouldn’t have a $1k/mth payment in this economy! That said, I’m freshening up my truck and wondering which option this sub would choose and why?!

Also, is it worth powder coating the F-150 decals on the side? The pre-‘18 platinum grill and tailgate stands out to me so those will stay, but let me know your opinions on refreshes.


r/f150 • • 4h ago

Gen 3 coyote cam

1 Upvotes

Hello, does anyone know what size bolts I need for cam shaft bearings and phasers for the 2018 gen 3 5.0L coyote?

Apparently they are all TTY bolts, but i cannot find a kit/set (arp apparently is for gen 1 an 2, even though they have all the years). And from what I'm finding online is contradicting.

TIA


r/f150 • • 1d ago

Joined the F150 family!

Post image
105 Upvotes

Hey everyone. Thought I would make a post. Wednesday I picked up this beaut of a F150. It’s a 2019 with 67,600 miles, 5.0, and 10 speed. Beautiful inside and out. Not a dent or a speck of rust on it. Hope everyone has a great day.


r/f150 • • 21h ago

Headlight Upgrade for 2018 F150

Thumbnail
gallery
11 Upvotes

I do a pretty fair amount of driving in the dark (also love the cosmetic upgrade). That said I want to upgrade my housing and avoid being the guy that throws LED bulbs in and just blinds everyone. I was looking at the Morimoto XB Hybrid but they aren’t listed on morimotos website anymore. What’s everyone rocking these days? I don’t want some cheap Vlands but would also like to keep it under 1000$🙏🏼


r/f150 • • 18h ago

3.5 eco-boost issues mechanic help needed!

Post image
6 Upvotes

Hello everyone I have a 2016 F150 3.5 L eco-boost. I’ve been having issues on this truck for a minute now, the current issue is that cylinder one and cylinder six are misfiring. I originally thought it was bad gas so I replaced the injectors, two new coils, spark plugs. I have tried doing as many tests as I can swapping coils, swapping plugs. I just can’t seem to figure it out. The data is reading that just cylinder one is having a misfire. I’ve checked continuity between the main engine connection and the coil plug on the boot and everything seems to be good. Can anyone point me in the right direction? Any advice is helpful thank you.


r/f150 • • 18h ago

Tow Mirrors

4 Upvotes

I hardly ever tow, and am getting ready to buy a used '23 Lariat that has everything I want but has tow mirrors. I don't want them, but have any of you ever traded mirrors with anyone? I know I'll need to get it recalibrated and such (360 cameras, 502A package). Thanks!


r/f150 • • 19h ago

F150 badges

Post image
3 Upvotes

I’m looking for fender badges this style but with the chrome colored smoked chrome. I’ve been looking everywhere and can’t seem to find it. Do I just need to paint them myself? And if so what would be the best paint to use for something like that.


r/f150 • • 1d ago

Average purchase price on 2026 F150

12 Upvotes

Just wondering what everyone’s prior experience or thoughts on the out the door purchase price on a 2026 F150 XLT 5.0 4WD with maybe 302A package.


r/f150 • • 15h ago

Exhaust Suggestions for 5.4l Triton V8

Post image
1 Upvotes

Thinking about upgrading the exhaust on my 2009 F150 Platinum with the 5.4l Triton V8. Looking at the Flowmaster Outlaw catback exhaust and I love the sound but I’ve been seeing mixed reviews about cabin drone. Any suggestions or personal experiences?

209k miles. The stock exhaust has a lot of leaks which makes it sound pretty awful when revving it. Unfortunately my cat is leaking and maybe my passenger manifold so I’ll probably repair the leaks myself before buying the exhaust. Nothing more than regular surface rust.

Exhaust: https://www.flowmastermufflers.com/products/exhaust/exhaust_systems/cat-back/parts/817691


r/f150 • • 1d ago

New shoes

Thumbnail
gallery
174 Upvotes

Finally put on a lift and some tires. Was not that fun🤦‍♂️ but it looks good


r/f150 • • 20h ago

2026 XLT Hybrid 3.5 , has a buzzing feeling in the pedal and steering wheel

0 Upvotes

Hey guys!
Got my 2026 XLT Hybrid about 3 months ago, has just over 5k as of today.
The truck has a a buzzing feeling in the acceleration pedal / a little vibration in the seat , steering wheel at low speed and also at high speed. There's also vibration when i take my foot of the pedal when driving at low speed.

Took it to the dealership a couple weeks ago they brushed it off by saying it's the hybrid engine.
But I'm taking it back again soon because it doesn't feel right it's supposed to drive smooth.

Any suggestions/ advice is appreciated on how to deal with this situation and get it fixed.
Thank you