r/f150 • • 16m ago

Turbo fitting coolant leak

1 Upvotes

2013 Ford F150 Limited, 3.5l, 122k miles. I have a turbo fitting that I noticed a leak on, how urgent is it to repair.
I know there are several other parts to consider replacing during the job, any advice is great.


r/f150 • • 2h ago

Replacement Complete! 2023 Lariat

Post image
22 Upvotes

After my wreck back in July and totaled truck, I’m finally back where I wanted to be. 2023 Lariat FX4 with 3.5 EB. Took weeks of searching to find the exact replacement truck I wanted. Only real difference is this one was later off the line in 2023 so it has the auto stop/start (meh) and heated steering wheel (score!!). Got clear PPF all over the front, hood, etc and colored rocker panels done last week, just in time for snow.


r/f150 • • 2h ago

Need some tips for supercharging

1 Upvotes

Im looking at supercharging a 2026 f150, i like the VMP whipples but the ones made for 2026 model are the 3.8 liter and i feel like thats too much to daily drive the truck, i like the 3.0 liter ones because i feel like thats a happy medium for it but VMP has those marked as 2020 models, since its the same 5.0 V8 motor can i still use that supercharger on the 2026 model f150?


r/f150 • • 3h ago

Gen 3 coyote cam

1 Upvotes

Hello, does anyone know what size bolts I need for cam shaft bearings and phasers for the 2018 gen 3 5.0L coyote?

Apparently they are all TTY bolts, but i cannot find a kit/set (arp apparently is for gen 1 an 2, even though they have all the years). And from what I'm finding online is contradicting.

TIA


r/f150 • • 4h ago

2016 F150 crew. Clunk and rubbing noise.

Thumbnail
gallery
2 Upvotes

Thanks for any advice or info. Pics are of both sides. On jack no load. On ground under load. I’m not sure what any of those parts are called other that. The controls arms, ball joints and break things. Some rubbing when turning. Mainly sharp turns to the right. Parking spot or onto streets. As for the clunky sound. If I go over a manhole cover that’s an inch or so below the pavement or any off road, it’s sounds like a clunk or something’s loose. I had it up on jack to check. Everything it tight. Not sure if shocks are bad, see no leaking or build up like it was leaking. Had it at the dealership to have the front drivers side front looked at. That sounds like where most of it is coming from. Half a day later they say that can’t find anything or here any clunk. When I picked up the truck. I took the advisor for a drive, took him around a few turns, took him over by where my work is, and out of the parking lot, made the sounds. He claims they didn’t hear none of that on their test drives. I crawled under, took some pictures, and seen it rubbing somewhere. I say somewhere cause I don’t really know what the parts are called.


r/f150 • • 14h ago

Exhaust Suggestions for 5.4l Triton V8

Post image
1 Upvotes

Thinking about upgrading the exhaust on my 2009 F150 Platinum with the 5.4l Triton V8. Looking at the Flowmaster Outlaw catback exhaust and I love the sound but I’ve been seeing mixed reviews about cabin drone. Any suggestions or personal experiences?

209k miles. The stock exhaust has a lot of leaks which makes it sound pretty awful when revving it. Unfortunately my cat is leaking and maybe my passenger manifold so I’ll probably repair the leaks myself before buying the exhaust. Nothing more than regular surface rust.

Exhaust: https://www.flowmastermufflers.com/products/exhaust/exhaust_systems/cat-back/parts/817691


r/f150 • • 17h ago

3.5 eco-boost issues mechanic help needed!

Post image
6 Upvotes

Hello everyone I have a 2016 F150 3.5 L eco-boost. I’ve been having issues on this truck for a minute now, the current issue is that cylinder one and cylinder six are misfiring. I originally thought it was bad gas so I replaced the injectors, two new coils, spark plugs. I have tried doing as many tests as I can swapping coils, swapping plugs. I just can’t seem to figure it out. The data is reading that just cylinder one is having a misfire. I’ve checked continuity between the main engine connection and the coil plug on the boot and everything seems to be good. Can anyone point me in the right direction? Any advice is helpful thank you.


r/f150 • • 18h ago

Tow Mirrors

4 Upvotes

I hardly ever tow, and am getting ready to buy a used '23 Lariat that has everything I want but has tow mirrors. I don't want them, but have any of you ever traded mirrors with anyone? I know I'll need to get it recalibrated and such (360 cameras, 502A package). Thanks!


r/f150 • • 19h ago

F150 badges

Post image
3 Upvotes

I’m looking for fender badges this style but with the chrome colored smoked chrome. I’ve been looking everywhere and can’t seem to find it. Do I just need to paint them myself? And if so what would be the best paint to use for something like that.


r/f150 • • 19h ago

2026 XLT Hybrid 3.5 , has a buzzing feeling in the pedal and steering wheel

0 Upvotes

Hey guys!
Got my 2026 XLT Hybrid about 3 months ago, has just over 5k as of today.
The truck has a a buzzing feeling in the acceleration pedal / a little vibration in the seat , steering wheel at low speed and also at high speed. There's also vibration when i take my foot of the pedal when driving at low speed.

Took it to the dealership a couple weeks ago they brushed it off by saying it's the hybrid engine.
But I'm taking it back again soon because it doesn't feel right it's supposed to drive smooth.

Any suggestions/ advice is appreciated on how to deal with this situation and get it fixed.
Thank you


r/f150 • • 20h ago

First truck! 2021 Lariat Powerboost Hybrid

Post image
88 Upvotes

Wanted a truck for many years, finally found one with the options I want at a reasonable price. It has every option (502A, Unleashed sound, all the tow add-ons, etc...) and has a very mint-y interior.

Loving driving it so far. Surprisingly fast off the line. Wasn't expecting it to be quite so quick.


r/f150 • • 20h ago

Transmission Control Solenoid Replacement (2019 F-150 3.5L 10R80)

1 Upvotes

Hello fellow truck-with-a-dogshit-10-speed drivers, I have a bit of a predicament.

I am the (somewhat) proud owner of a 2019 F-150 Lariat with everyone’s favorite combination of the 3.5 ecoboost and a 10R80 transmission. Recently I have noticed some quite rough shifts and had a Powertrain fault show up. I took it to ford and after they robbed me of 150 dollars of my hard earned money they told me my transmission control solenoids were causing the problem. They said they could replace it but I want to see how hard/much money it will cost me to do it myself. I am somewhat mechanically knowledgeable but haven’t done much with transmissions. Has anyone here ever replaced their TCS’s? If so how much did that run you and was it very hard? Any day I don’t have to give a shit ton of money to ford is a good day in my book


r/f150 • • 20h ago

Headlight Upgrade for 2018 F150

Thumbnail
gallery
11 Upvotes

I do a pretty fair amount of driving in the dark (also love the cosmetic upgrade). That said I want to upgrade my housing and avoid being the guy that throws LED bulbs in and just blinds everyone. I was looking at the Morimoto XB Hybrid but they aren’t listed on morimotos website anymore. What’s everyone rocking these days? I don’t want some cheap Vlands but would also like to keep it under 1000$🙏🏼


r/f150 • • 21h ago

Blacked out or Nah?!

Post image
26 Upvotes

‘17 Platinum w/ 185k on it and a recent sabbatical had me test driving new trucks & teasing salesmen until I decided I shouldn’t have a $1k/mth payment in this economy! That said, I’m freshening up my truck and wondering which option this sub would choose and why?!

Also, is it worth powder coating the F-150 decals on the side? The pre-‘18 platinum grill and tailgate stands out to me so those will stay, but let me know your opinions on refreshes.


r/f150 • • 22h ago

FX4 pronunciation

0 Upvotes

I might be the clueless one here, but we all know 4x4 is pronounced "four by four" (right?!?). But, when talking with my wife the other day about me possibly removing the stickers, she said "eff by four" for FX4. I always assumed this was "eff ex four". Am I alone? Kinda wrecked my brain a bit!

Edit - I have the FX4 package on my '25 powerboost. Just bewildered to hear it called "eff by four" from my wife and wondering if anyone else ever heard it this way.


r/f150 • • 1d ago

New to me 2025 Powerboost King Ranch- Just got tint, next is some new tires and level kit.

Thumbnail
gallery
73 Upvotes

What do you guys recommend for tires, size and brand? I am thinking 275/65 R20s SL, I want a more aggressive and larger look without sacrificing too many sweet mpgs.


r/f150 • • 1d ago

American trucks.com

1 Upvotes

Has anybody had any experience with Americantrucks.com? I have been eyeing 22” expedition platinum replica chrome wheels and was wondering if they were good quality


r/f150 • • 1d ago

Help! Cannot get good open! ‘25 F-150 Raptor 802A

0 Upvotes

For some reason, my battery is dead and I can’t get my hood to open. The hood release latch had resistance on the first pole but now it doesn’t feel like it’s doing anything in the hood won’t pop. I’ve had someone pull it while I apply pressure to the hood downward in order to try and release it nothing the hood is just firmly in place and won’t open. Does anybody know if there’s an emergency release anywhere or any suggestions on how the hell I get my hood open?


r/f150 • • 1d ago

Average purchase price on 2026 F150

12 Upvotes

Just wondering what everyone’s prior experience or thoughts on the out the door purchase price on a 2026 F150 XLT 5.0 4WD with maybe 302A package.


r/f150 • • 1d ago

Got my FP700

Post image
216 Upvotes

I love it, it pulls amazingly.

What aftermarket mods do you guys recommend?

EDIT: For those who don’t know, the FP700 is the racing version of the f150. It’s a supercharged coyote with roughly 700-715hp. Also, I’m asking what are general recommendations for performance mod recommendations along with anything else that you guys think is worthwhile.


r/f150 • • 1d ago

F-150 10R80 Harsh 7-8 Shift: The CDF clutch drum bushing slip teardown & why valve bodies get scored

Thumbnail
autozonic.com
92 Upvotes

If your 2017–2022 F-150 with the 10R80 10-speed has started kicking violently on the 7-8 upshift, slipping into neutral when rolling to a stop, or delaying 2 to 3 seconds before banging into Reverse, do not let a shop immediately sell you a $7,500 reman unit or just clear shift adapts and send you home.

What you are looking at on the bench is the CDF clutch drum assembly. Ford pressed a brass/bronze sleeve bushing into the center cylinder bore to seal hydraulic fluid pressure across three clutch circuits (Clutch C, D, and F). On the factory original drums, there is no physical retaining shoulder or machined lip behind that sleeve.

Under constant thermal cycling and high line pressure (especially when towing or driving in hot climates), that center bushing creeps and walks backward along the hub. Once it migrates just a few millimeters, it blocks the hydraulic fluid feed ports and begins shaving the internal Teflon sealing rings.

Fluid that is supposed to firmly clamp the clutch packs starts bleeding past the seal. The transmission control module (TCM) detects the slip, commands max line pressure to compensate, and literally slams the clutch pack home—that is the bone-jarring kick you feel through the floorboard.

The real danger is waiting too long: once that bushing walks, fine bronze and Teflon debris get pumped directly into the main control valve body. If caught early while it is just an occasional firm shift, replacing the drum and rings saves the transmission. If you drive on it until it drops into neutral at red lights, those metal fines score the aluminum spool valve bores, requiring a brand new valve body or a full rebuild.

Two practical field checks you can do right now:

  1. Watch your transmission temp gauge. Does the harsh shift happen dead cold or only after reaching full 195°F–205°F operating temp? CDF fluid blow-by gets dramatically worse as Mercon ULV thins out at operating temperature. If it shifts fine cold and kicks hot, that points straight to hydraulic pressure loss past the sleeve.
  2. Check the fluid on the dipstick under the heat shield (passenger side of the case). Mercon ULV should be amber/light golden. If it smells burnt or has a pearlescent metallic sheen in direct sunlight, clutch friction material has already started burning from low clamping pressure.

Ford documented this in TSB 23-2250, but thousands of owners are still paying out of pocket because dealers claim harsh 7-8 hunting is just "normal 10-speed adaptive behavior."


r/f150 • • 1d ago

Rims and tires

1 Upvotes

What is the best website to get rims and tires from ?
Send me your setups your running for some ideas. Thanks in advance.


r/f150 • • 1d ago

Alignment

Post image
0 Upvotes

Just got my first alignment done on my 2024 f150 and noticed that left rear toe is way off. Shop never said anything to me about it. I know there’s nothing to adjust back there and the truck has never been in any sort of accident and has always tracked straight going down the road. Should I be concerned.