Thanks for any advice or info. Pics are of both sides. On jack no load. On ground under load. I’m not sure what any of those parts are called other that. The controls arms, ball joints and break things. Some rubbing when turning. Mainly sharp turns to the right. Parking spot or onto streets. As for the clunky sound. If I go over a manhole cover that’s an inch or so below the pavement or any off road, it’s sounds like a clunk or something’s loose. I had it up on jack to check. Everything it tight. Not sure if shocks are bad, see no leaking or build up like it was leaking. Had it at the dealership to have the front drivers side front looked at. That sounds like where most of it is coming from. Half a day later they say that can’t find anything or here any clunk. When I picked up the truck. I took the advisor for a drive, took him around a few turns, took him over by where my work is, and out of the parking lot, made the sounds. He claims they didn’t hear none of that on their test drives. I crawled under, took some pictures, and seen it rubbing somewhere. I say somewhere cause I don’t really know what the parts are called.