r/gunsmithing • • 4h ago

Has anyone installed a 30-06 to 308 Navy Sleeve?

Post image
10 Upvotes

I might be able to pick up a sporterized m1917 for sub $200 in a few months and I may convert it to a can launcher that uses 7.62 nato blanks.

Does anyone know how to install these things?


r/gunsmithing • • 2h ago

Cup tip punch recommendations?

Post image
3 Upvotes

I need to drive the two pins from the front sight base on my H&R M16A1 clone. What I’m seeing online says to use a cupped tipped punch, which makes sense given the rounded pin head, but I’m not seeing many available for sale. Brownells has some, but the reviews aren’t great stating they bend. Anybody have a recommendation?


r/gunsmithing • • 1h ago

Burning Questions

1 Upvotes

So while I understand this might get me some flak for posting about things adjacent to gunsmithing, I’ve been really interested in finding an answer to a question I had. In the TTRPG Cyberpunk 2020 the police are issued a pistol called the Armalite 44, which, as the name implies, is chambered in .44. However, the art for the gun greatly resembles the M9. Would the M9 system work for a pistol cartridge that big or would it just blow up or something. Would appreciate answers, thanks so much in advance.


r/gunsmithing • • 5h ago

Lever gun help please. So how do you all feel about this? Marlin 1895 sbl 45-70

Thumbnail
gallery
2 Upvotes

So, not sure who to ask or who to see about such things. By running serial number I found it was manufactured during the Remington era. It looks like the barrel chipped on the wedge cut for the ejection lever? Please forgive my nomenclature… This rifle is my pack gun and has been all over this country with me and would like to know if this is concerning? I was going to replace barrel but I’m under the understanding that I shouldn’t just hand this to any person that says they work on guns. I’m told I need an old timer or a guy that does this regularly. Apparently you can warp the receiver, clock wrong and even mess up the head space. Not opposed to any upgrade options as I’ve found a new barrel and muzzle break from Midwest gun works. Any information or feelings would be greatly appreciated as I would just like to right by her as she’s done right by me for a long time now. Thank you in advance.


r/gunsmithing • • 17h ago

.22lr round exploded when firing

Thumbnail
gallery
9 Upvotes

Looking for some advice here pretty new to guns have an old .22 put about 30rounds through it then one exploded in the chamber when i fired blew the back out of the bullet. Barrel seemed to be clear from what i can see .What could have caused it? And how do i know if it is still safe to fire? Any advice is apreciated


r/gunsmithing • • 23h ago

Hello Redditors! I have this marlin 336 here and I’d like to add a sling but don’t know how.

Thumbnail
gallery
15 Upvotes

So I bought this screw stud set, but I’m not quite sure how to put them in there and have them stay when the hole is not threaded and the screw themselves don’t look pointy enough for me to drill into the wood or are there special tools that I need before inserting those studs? Thanks in advance!


r/gunsmithing • • 14h ago

S&W airweight: sparks shooting out of firing pin channel after gorilla handling it.

2 Upvotes

The other night at a family gathering my brother who may or may not have had a few drinks asked if he could see my j frame revolver. I unloaded it and handed it over, and while we were talking he kind of aggressively ripped the trigger 5-6 times, I told him to take it easy and he handed it back over so I could put it away.

Today I was moving it and pulled the hammer back, noticing a rough spot and odd click that wasn’t really present before. When I pulled the trigger I watched a visible white spark jump from the firing pin channel into the empty cylinder. I repeated this several times with the same result and was actually able to take a slow motion video of it with dark lighting so you can see it very clearly.

Is this an issue other j frame owners have seen before? I’m going to take it to the shop on Monday bc I’m thinking this could be an indicator of bigger problems with the gun. I’m not keen on tearing this one apart myself either :/


r/gunsmithing • • 21h ago

Is this muzzle crown fucked?

Thumbnail
gallery
5 Upvotes

Original Marlin Ballard No.1 1/2 Hunter's rifle 45-70


r/gunsmithing • • 1d ago

Can anyone help?

Post image
13 Upvotes

Where do I file this trying to fit a grip and I'm lost it's a personal project so just looking for advice?


r/gunsmithing • • 1d ago

Stevens 311 series H help

Thumbnail
gallery
2 Upvotes

Hello, picked up a Stevens 311 and been trying to clean it up and swap parts that are worn down. In the process a few things fell off or broke. Also the stock sounds hollow on one side, I imagine it could be rotted or something? In the end I couldn’t get the barrels off. Followed instructions, used degreaser and cleaner on everything hoping it would get free but nothing. I can dry fire it, cock it etc but no luck on disassembling it further. I ordered a new cocking plunger since this one snapped. Any help would be appreciated.


r/gunsmithing • • 1d ago

Designing a Gun?

0 Upvotes

To preface I have surface level knowledge on the construction of firearms but I do have mill and lathe experience. One of my favorite firearms is the Panzerbüchse 39, however I would never buy one for a couple of reasons, specifically the round, price, and size. I inherited a myriad of firearm parts and was thinking about cannibalizing this incomplete winchester 70-30-06 Springfield pictured below and then designing and machining a falling block like the one on the PzBh 39, not necessarily to create a replica but to create something aesthetically similar. My question is, is it a bad idea to use parts from the winchester? Should I just design and build everything from scratch? My concern with a fully scratch build is that I don't have the tools to rifle a barrel and it would cost significantly more. Also, as far a technicalunderstanding goes, where should I start learning about how to do this and safely at that? Thank you.


r/gunsmithing • • 1d ago

Any suggestions on how to increase the trigger pull on my Shadow 2 SLIGHTLY

1 Upvotes

Here is my problem.

I have a CGW pro kit installed, KMR SAO flat trigger and Eeman Tech ultimate competition hammer. My main spring is 8lb and i have also polished the internals slightly.

Now my trigger sits at 2.5lb. Which feels amazing, but the minimum trigger pull for 25m national handgun competition in my country is 3lb (1.360 g).

I have tried replacing the main spring with a 9lb one, but that puts my trigger way above 3lb. I just need that 0.5lb to get my trigger pull into the competition regulation limit.


r/gunsmithing • • 2d ago

Heritage rough rider snub barrel

Thumbnail
gallery
75 Upvotes

Found out the barrel of rough rider 22s are 1/2x28, and had the end of a scrap ar15 barrel. Biggest "gunsmithing" project I've done to date, with small hand tools only. Not very confident in the accuracy or my halfassed forcing cone, but this was never a reliable gun anyway


r/gunsmithing • • 1d ago

Bent piece in Ruger Redhawk

Post image
1 Upvotes

I am no Gunsmith by any means. Does anyone know what this piece/part is called inside the Redhawk's frame? When the trigger is pulled, instead of coming straight to the frame's rear, it bends to the left.


r/gunsmithing • • 1d ago

Is it trash?

Thumbnail
gallery
14 Upvotes

NOT A GUN SMITH. Looking for advice on 7mm-08 Browning X-Bolt. Casings were getting stuck and bolt unable to be cycled. Inspected and found rust and pitting inside chamber. Assuming case expanding into pitting causing stuck casing. Inspection after thorough cleaning still shows rough surface but also revealed what looks like a crack inside of the action(inner/upper) prior to chamber. With the combination of issues lead to the trash can or a reputable smith? Thanks for any and all advice.


r/gunsmithing • • 1d ago

Threads on silencer and barrel

2 Upvotes

I bought a new barrel and silencer for my Ruger 10/22. The silencer is a Polite Society Temperance 22.

The barrel and silencer do not want to thread together smoothly. I probably cranked on it harder than I should have and want to get the threads on both inspected and cleaned up. Is this something a gunsmith would be willing to do on a suppressor? Or is this something I could clean up with a 1/2-28 tap and die?


r/gunsmithing • • 2d ago

Custom Super Blackhawk barrel

Thumbnail
gallery
190 Upvotes

Made up a 5.5" barrel band barrel to go mate up to the cylinder I fixed the endshake on. Barrel was turned between centers on my South Bend 13. Marking which jaw the lathe dog engaged on let me take it in and out of the lathe to check the thread fit and not have to pick up the thread. The barrel band is located to be an integral recoil lug for the ejector rod housing, so no shear stress on that little 8-36 screw. Crown was checked with a Q tip for burrs. This is the first barrel I have made from a blank. I like the looks of the revolvers the Linebaugh and Bowen would build, so this is heavily inspired by what they did.


r/gunsmithing • • 2d ago

Best way to match this dull old bluing? Cold blue? Rust blue?

Thumbnail
gallery
6 Upvotes

r/gunsmithing • • 1d ago

Is it possible to drill and tap a Beretta 84 bb for a micro red dot?

Thumbnail
gallery
0 Upvotes

r/gunsmithing • • 2d ago

Please help

Thumbnail
gallery
0 Upvotes

I got this echelon from a friend and he tryed to install a tyrant CNC trigger and it is extremely sticky won’t reset or move freely and the alen screw is striped on the trigger


r/gunsmithing • • 2d ago

Advice on 66-4 K Frame

Thumbnail
gallery
11 Upvotes

It’s a long story. My father in law died unexpectedly and this 1995(ish) stainless K frame was in his safe. However, it had obviously been run over by a truck or something very kinetic occurred. The cylinder was deflected by about 15 degrees, yoke bent, ejector/center rod bent, cylinder lock sheared off. Back side broken, grips crushed. Over the past few years, I’ve picked up parts and done some polishing. I need to find a gunsmith to test it and ensure the last few parts are properly fitted. If it gets a clean bill of health I’d like a few performance mods, maybe some engraving, to give to his grandson. I need to make a checklist of what should be evaluated. Any suggestions or thoughts are appreciated.


r/gunsmithing • • 2d ago

What kind of solder should I use to reattach the magazine tube lug onto a mossberg?

Post image
6 Upvotes

r/gunsmithing • • 3d ago

South Bend Heavy 10 Lathe

Thumbnail
gallery
13 Upvotes

I have been looking at lathe for quite a while and came across this South Bend heavy 10 lathe for sale locally. With the included accessories and tooling would this be a solid purchase?


r/gunsmithing • • 2d ago

Trying to remove a flash hider but I am stuck...

2 Upvotes

Hey all,

So I have been trying to get a flash hider off of a PSA Jackel it was pinned and welded, so I dreaml out the pin. And I thought it was tight. I look and there appears to be rocksett on it along with the pin and weld. Anyways, fast forward 12 hours of soaking in water I cannot get the damn thing off. And after asking the customer if he was in love with the factory flash hider he said no. So I started grinding it off...

Anyways I am at ends with how to get it off. I have taken MDs off no problem, but this is a first...I'm just looking for ideas or solutions to get this flash hider off. Thanks