r/gunsmithing • • 19h ago

Hello Redditors! I have this marlin 336 here and I’d like to add a sling but don’t know how.

Thumbnail
gallery
14 Upvotes

So I bought this screw stud set, but I’m not quite sure how to put them in there and have them stay when the hole is not threaded and the screw themselves don’t look pointy enough for me to drill into the wood or are there special tools that I need before inserting those studs? Thanks in advance!


r/gunsmithing • • 13h ago

.22lr round exploded when firing

Thumbnail
gallery
8 Upvotes

Looking for some advice here pretty new to guns have an old .22 put about 30rounds through it then one exploded in the chamber when i fired blew the back out of the bullet. Barrel seemed to be clear from what i can see .What could have caused it? And how do i know if it is still safe to fire? Any advice is apreciated


r/gunsmithing • • 17h ago

Is this muzzle crown fucked?

Thumbnail
gallery
5 Upvotes

Original Marlin Ballard No.1 1/2 Hunter's rifle 45-70


r/gunsmithing • • 10h ago

S&W airweight: sparks shooting out of firing pin channel after gorilla handling it.

2 Upvotes

The other night at a family gathering my brother who may or may not have had a few drinks asked if he could see my j frame revolver. I unloaded it and handed it over, and while we were talking he kind of aggressively ripped the trigger 5-6 times, I told him to take it easy and he handed it back over so I could put it away.

Today I was moving it and pulled the hammer back, noticing a rough spot and odd click that wasn’t really present before. When I pulled the trigger I watched a visible white spark jump from the firing pin channel into the empty cylinder. I repeated this several times with the same result and was actually able to take a slow motion video of it with dark lighting so you can see it very clearly.

Is this an issue other j frame owners have seen before? I’m going to take it to the shop on Monday bc I’m thinking this could be an indicator of bigger problems with the gun. I’m not keen on tearing this one apart myself either :/


r/gunsmithing • • 20h ago

Stevens 311 series H help

Thumbnail
gallery
2 Upvotes

Hello, picked up a Stevens 311 and been trying to clean it up and swap parts that are worn down. In the process a few things fell off or broke. Also the stock sounds hollow on one side, I imagine it could be rotted or something? In the end I couldn’t get the barrels off. Followed instructions, used degreaser and cleaner on everything hoping it would get free but nothing. I can dry fire it, cock it etc but no luck on disassembling it further. I ordered a new cocking plunger since this one snapped. Any help would be appreciated.


r/gunsmithing • • 1h ago

Lever gun help please. So how do you all feel about this? Marlin 1895 sbl 45-70

Thumbnail
gallery
1 Upvotes

So, not sure who to ask or who to see about such things. By running serial number I found it was manufactured during the Remington era. It looks like the barrel chipped on the wedge cut for the ejection lever? Please forgive my nomenclature… This rifle is my pack gun and has been all over this country with me and would like to know if this is concerning? I was going to replace barrel but I’m under the understanding that I shouldn’t just hand this to any person that says they work on guns. I’m told I need an old timer or a guy that does this regularly. Apparently you can warp the receiver, clock wrong and even mess up the head space. Not opposed to any upgrade options as I’ve found a new barrel and muzzle break from Midwest gun works. Any information or feelings would be greatly appreciated as I would just like to right by her as she’s done right by me for a long time now. Thank you in advance.


r/gunsmithing • • 20h ago

Any suggestions on how to increase the trigger pull on my Shadow 2 SLIGHTLY

1 Upvotes

Here is my problem.

I have a CGW pro kit installed, KMR SAO flat trigger and Eeman Tech ultimate competition hammer. My main spring is 8lb and i have also polished the internals slightly.

Now my trigger sits at 2.5lb. Which feels amazing, but the minimum trigger pull for 25m national handgun competition in my country is 3lb (1.360 g).

I have tried replacing the main spring with a 9lb one, but that puts my trigger way above 3lb. I just need that 0.5lb to get my trigger pull into the competition regulation limit.


r/gunsmithing • • 22h ago

Bent piece in Ruger Redhawk

Post image
1 Upvotes

I am no Gunsmith by any means. Does anyone know what this piece/part is called inside the Redhawk's frame? When the trigger is pulled, instead of coming straight to the frame's rear, it bends to the left.


r/gunsmithing • • 19h ago

Designing a Gun?

0 Upvotes

To preface I have surface level knowledge on the construction of firearms but I do have mill and lathe experience. One of my favorite firearms is the Panzerbüchse 39, however I would never buy one for a couple of reasons, specifically the round, price, and size. I inherited a myriad of firearm parts and was thinking about cannibalizing this incomplete winchester 70-30-06 Springfield pictured below and then designing and machining a falling block like the one on the PzBh 39, not necessarily to create a replica but to create something aesthetically similar. My question is, is it a bad idea to use parts from the winchester? Should I just design and build everything from scratch? My concern with a fully scratch build is that I don't have the tools to rifle a barrel and it would cost significantly more. Also, as far a technicalunderstanding goes, where should I start learning about how to do this and safely at that? Thank you.