r/Homebrewing • u/scootunit • 5h ago
Brewing Cheap 11% Alcohol From Irn Bru [1901]
r/Homebrewing • u/chino_brews • Mar 20 '21
r/Homebrewing • u/AutoModerator • 13h ago
Welcome to the Daily Q&A!
Are you a new Brewer? Please check out one of the following articles before posting your question:
Or if any of those answers don't help you please consider visiting the /r/Homebrewing Wiki for answers to a lot of your questions! Another option is searching the subreddit, someone may have asked the same question before!
However no question is too "noob" for this thread. No picture is too tomato to be evaluated for infection! Even though the Wiki exists, you can still post any question you want an answer to.
Also, be sure to vote on answers in this thread. Upvote a reply that you know works from experience and don't feel the need to throw out "thanks for answering!" upvotes. That will help distinguish community trusted advice from hearsay... at least somewhat!
r/Homebrewing • u/scootunit • 5h ago
r/Homebrewing • u/YouBetGiraffeItIs • 2h ago
I decided to brew my first lambic. I pitched some Cantillon dregs that I had saved and built up a bit on Monday (11/16). I have seen any activity but the fermenter smells pretty nice but today (11/22) I noticed there are some spots on top that look a little fuzzy and some that have dark spots on them. Attached some pictures here, they're about the best I could get, apologies for the bad quality. There are only about 5 spots total so some of the pictures are duplicates. Any experienced lambic makers think this is ok still?
r/Homebrewing • u/lala72214 • 27m ago
Hey guys! Used some hops maybe sometime back in August or September, and threw them in the freezer in a ziploc bag after use (I don't have access to a vacuum sealer). Are they probably still ok to use? What kind of smell should I be looking for/what does it smell like when I should throw away? Does anyone have any experience freezing hops like this and their next batch still coming out ok? Thanks so much!
r/Homebrewing • u/Beaudog12345 • 3h ago
I’m puzzled trying to figure out what this is, I haven’t seen a picture similar to this. It fermented to 8.5% in about 4-5 days, and finished dry. I racked it into a carboy and let it sit until the two-week mark, where I added a Camden tablet and potassium sorbate to stabilize. 24hrs later I racked it off the sediment again, back sweetened it and bottled it. At bottling, it was almost entirely clear with just a little haze, and nothing was floating on top of the bucket. It tasted fine if just a little yeasty, but now after a week of sitting it has these cotton ball-looking floatys in every bottle. What’s going on here?
Edit: I cracked one open and there is no noticeable change in pressure/smell. Also, the ones stored in the fridge have more haze without the floatys, and have some sediment at the bottom.
r/Homebrewing • u/blodskjegg • 13h ago
I'm looking to get into kegging for the first time and would appreciate some advice on which of these three packages offers the best value.
I'm based in Norway, so these are locally available options. Prices are converted from NOK to USD (approximately).
My plan is to use 425g SodaStream-compatible CO₂ cylinders.
The regulator is a standard CO₂ regulator, so I would need a separate SodaStream adapter (approx. $17) to use my 425g cylinders.
The regulator is designed specifically for SodaStream cylinders, so no separate adapter is needed.
The price is the same whether I choose the MK4 or Mini 360 and since I don't plan on using larger CO₂ tanks, the Mini 360 seems like the best choice.
Since I've never used keg before I'm looking for everything in one packages, but I also don't want to buy something I'll regret later. So the cheapest option would be around 170$, but is it worth the extra 60$ to get a new keg?
Anything else I need for my first keg setup?
r/Homebrewing • u/donpelon415 • 1d ago
I tried to make a Timothy Taylor's Landlord clone, a classic British cask ale:
9lbs Golden Promise
1oz Fuggles 60mins
2/3 Cup #1 Invert Syrup (15 mins)
1 tsp Irish Moss (15 mins)
1oz Styrian Goldings Flameout
90min boil
Yeast: Safale S-04
OG: 1.050
FG: 1.008
But after two weeks in the primary and one week in the keg conditioning at 55F, it is very hazy, and quite hoppy, much hoppier than I would expect or want from this beer style. I prefer restrained hops and a malty backbone. It looks like a Hazy IPA or a Hefeweizen. Not that this is bad, it actually tastes pretty good, but not at all like an English ale or the beer style I was trying to hit. I tried cold crashing it at 36F for 24hrs and still no change, and the S-O4 yeast strain has always produced crystal-clear Bitters and English Ales when I've used it in the past. Perhaps the Styrian Goldings at flameout was added too late and they should have been boiled for 5 mins(?) Fuggles and Styrian hops are not strong varietals, nor were they in large quantities. Any ideas?
r/Homebrewing • u/Bobmctrip123 • 1d ago
Hey y’all! Curious if anyone on here has any experience and/or recipes to share for homebrewing root beer from scratch. I don’t want to do the same old dry ice and extract thing, I wasn’t to be able to play with the flavors. I’ve done a few regular beers of various styles and figured making something the whole family could drink would be a fun side quest.
r/Homebrewing • u/AstroBeer997 • 12h ago
Hi,
Last minute question here. Had few months of break from the brewing due to some idiotic issues and just life, and I just said I have to make a batch today with what I have.
Most suitable hops that I have are Chinook and Polaris. Has anyone tried this combination already? Malt that I will use is Pale Ale and some flaked oats.
This is my plan for 35l in fermentor.
Boil:
30g Chinook 60min
10g Chinook 15min
5g Polaris 15min
5g Chinook 5min
Whirlpool at 80C
40g Chinook
15g Polaris
r/Homebrewing • u/jmstone617 • 6h ago
Ok, ok, I know what you're thinking -- another citizen coder vibe coded some AI slop. But I'm a professional software engineer (well, these days I lead engineering teams but stay fairly technical) so if you're a competitive homebrewer and have struggled in the past to link your brewing data to your competition feedback, hopefully you'll find value in what I am about to share!
This is, admittedly, a niche for a niche -- homebrewers active on the competition circuit and the Master Homebrewer Program that want to use the feedback they are getting to brew better beer. I'm not talking about one judge from one scoresheet says your fermentation temp is too hot so you should go buy a glycol chiller. I had hundreds of scoresheets and wanted to identify trends across all of them; both for the same batch sent to multiple competitions and across batches and styles. So I built Grist.
There are a ton of features beyond just syncing your Brewfather or Brewer's Friend account and adding scoresheets. Grist helps keep you find competitions and then keeps you on track to make sure you don't miss registration or entry dates. You can even add a tracking number if you're shipping entries and follow the shipment status directly in Grist. You can manage packaging runs, which will not only automatically update your inventory for things like bottles and caps, but you can link a batch to a packaging run to an entry to really dive deep on if feedback is related to your recipe, your process, or your packaging (the last one helped me identify a packaging issue that was costing me about 7 points on average).
Most importantly, at its core Grist is free to use. There is a Pro tier that gives you access to things like automatic PDF import, deeper reporting and insights, and an AI assistant named Sight that allows you to ask natural language questions about your data, but you definitely don't have to upgrade to find value.
Grist is available on iOS, iPadOS, macOS, and web. There's also an Apple Watch app for tracking fermentation status and a few other things quickly from your wrist. If you're interested in checking it out, you can use this link to get 90 days free. I'm pretty actively still developing and launching new features, many of which come directly from user feedback, so please feel free to reach out to me with questions, issues, or ideas!
r/Homebrewing • u/ultravista_2 • 1d ago
My hazy IPA is crystal clear after 1.5 months in the keg. It was very hazy going into the keg.
Mashed @ 154 F and fermented @ 70 F. All hops were whirlpool (5 ounces) and dryhop (7 ounces).
No fining agents (never used them).
What would cause the haze to completely disappear? It is gone ...
----
4 lbs 8.0 oz Pale 2-Row (1.8 SRM) 28.1 %
4 lbs 8.0 oz Pilsner Malt (1.6 SRM) 28.1 %
2 lbs 8.0 oz Flaked Oats (1.0 SRM) 15.6 %
2 lbs 8.0 oz Flaked Wheat (1.6 SRM) 15.6 %
1 lbs 8.0 oz Carapils / Dextrin Malt (1.5 SRM) 9.4 %
8.0 oz Acid Malt (3.0 SRM) 3.1 %
LalBrew Verdant IPA yeastr/Homebrewing • u/i-like-dogs-167 • 1d ago
Hey all,
I have a batch of ginger beer fermenting on a wild fermentation that I started with a ginger bug. I want to keg this up for carbonation but am concerned that the ginger bug will infect the lines.
My plan is to stabilize with sulfites / sorbates before transferring it to the keg - would this work to keep my lines / keg from getting infected?
Thanks
r/Homebrewing • u/SadPianist6877 • 1d ago
Hi all , bit short on time lately for all grain brew so decided to try a beer kit :) Found this https://www.themaltmiller.co.uk/product/simply-ipa-beer-kit/
for very cheap and thought I'll give it a go ! It's a 1.8kg kit and I bought 1.2kg LEM to go with it.
Now the starting gravity is showing 1.040 ...
Would this be expected with such cheap kit or did I not mix it properly ? ( thought I mixed it properly )
r/Homebrewing • u/V-Right_In_2-V • 1d ago
I have a conical fermenter with a floating dip tube and I am so over the floating dip tube style of transfer. I’ve done this 5 times now and every time there’s like a gallon and a half left behind that just doesn’t get picked up.
This time the beer line went empty, the keg felt mostly full. I gave it a minute to see if more beer would come out. Nope. I assumed it was mostly empty.
Here’s where I fucked up. I forgot to close the butterfly valve to the trub collector. When I took it off, beer came pouring out the bottom and flooded my room. Probably dumped a gallon before I closed the valve. After cleaning and mopping everything, I opened the fermenter just to see another half gallon still at the bottom.
Why the hell is there always so much beer left? I’ve just bought a sight glass and a 90 degree elbow. I’m just going to dump trub till beer is in the sight glass, then transfer to the keg from the bottom. That also avoids hop matter floating at the surface.
Anyone else have these issues or am I just a moron?
r/Homebrewing • u/LJCAM • 1d ago
St Peter’s Cream Stout – fermentation slowing at 1.023. Is this normal?
I’m brewing a St Peter’s Cream Stout kit in my Malt Miller fermentation bucket.
It’s been fermenting for 5–6 days now in my fermentation chamber, . I followed the kit instructions and have kept the temperature at around 19, but increased it 20.3°C yesterday when it really slowed down.
My RAPT Pill is currently reading 1.023, but fermentation has slowed right down to around 0.2 gravity points per day.
I’m wondering whether this is normal for this stage of fermentation or whether it’s potentially getting stuck.
A few questions:
The instructions on the pack said it would take about six days and finish at 1.014, But every other kit I've brewed before has said fermentation should take around 14 days, so I'm a bit confused as to why this one says six days, first time I’m using a Rapt pill so
Maybe I’m just watching it too much lol
I’m relatively new to brewing, so any advice would be appreciated. Cheers!
r/Homebrewing • u/AutoModerator • 1d ago
Welcome to the Daily Q&A!
Are you a new Brewer? Please check out one of the following articles before posting your question:
Or if any of those answers don't help you please consider visiting the /r/Homebrewing Wiki for answers to a lot of your questions! Another option is searching the subreddit, someone may have asked the same question before!
However no question is too "noob" for this thread. No picture is too tomato to be evaluated for infection! Even though the Wiki exists, you can still post any question you want an answer to.
Also, be sure to vote on answers in this thread. Upvote a reply that you know works from experience and don't feel the need to throw out "thanks for answering!" upvotes. That will help distinguish community trusted advice from hearsay... at least somewhat!
r/Homebrewing • u/HetKanon • 2d ago
A while ago I posted this to see if anyone knew the difference. It seems a lot of nugget is sourced from the US so hallertau nugget is used a lot less.
I haven't had the chance to brew with US nugget.
But in the past months I brewed 3 batches with Hallertau nugget, 2 of which were single hop beers with relatively neutral yeasts (S-23 and S-04), and one of the (3.8% abv) single hop beers I dryhopped at a rate of about 2.2 g/L (0.3 oz / gal)
Since flavor and aroma profiles of Hallertau Nugget are quite hard to come by on the internet I will post my anecdotal experience.
In my experience, Hallertau Nugget is very neutral; it's the embodiment of "hoppy" without anything else. Apart from the extremely generic green hop aroma and flavor, it has some underlying unidentifiable fruitiness: in all 3 batches I got a very light zesty kind of fruitiness. But nothing woody or resinous or explicitly citric like I have seen in some descriptions of US nugget. The bitterness I got from it was very smooth.
Compared to Hallertau Mittelfrueh or Tettnanger, Hallertau Nugget for me came across as quite subtle and superficial, even with the significantly higher oil content versus those noble hops. The dryhop I did was noticable but spectacularly subtle.
I will keep using it just for this reason. Also because it's extremely cheap. I think it will do very well in a corn lager or something dark and heavy where you want nothing in the way of your malts and/or yeast.
r/Homebrewing • u/Used-Boysenberry9344 • 2d ago
About to start my first homebrew. Do I need to clean my never used equipment prior to sanitization or will sanitization be enough. Thanks!
r/Homebrewing • u/boiyo12 • 1d ago
I put 1.5kg of frozen cherries into 1.3L of water, then put the MO2 cider yeast in. Now I put the whole pack in because I understood u can't really put too much yeast in, only too lil. However now Im doubting that piece of advice I was given. Especially since I dont like the smell of yeast, so now I'm worried if adding too much in will make the brew (8%) taste yeasty when Im trying to make it sweet.
r/Homebrewing • u/_-KuKi-_ • 1d ago
Hey everyone!
I'm planning to buy my parents a Christmas gift, and I'd love some recommendations from people who actually know what they're doing, because I honestly have absolutely no experience with any of this.
My parents have been interested in making their own alcohol for quite some time, so I thought it would be a great idea to put together a proper home setup for them.
Here's what I'm looking for:
I'm not expecting a single machine to magically make every type of alcohol. I just want to build a versatile, high-quality setup that will allow them to experiment with different things over the years.
A few questions:
I'd also appreciate recommendations for more advanced equipment that could become useful as they gain experience.
Ultimately, I want to give my parents something they'll genuinely enjoy using for years, rather than a cheap starter kit they'll quickly outgrow.
Any specific product recommendations, complete equipment lists, personal experiences, or suggestions for where to start would be greatly appreciated.
Also what other subreddits I should repost it to?
Thanks in advance!
EDIT: I'm aware about the legality of producing whisky, moonshine etc. as long as my parents are safe (products can be tested somehow) I don't care.
r/Homebrewing • u/Puzzled-Attempt84 • 2d ago
Anything good out there.
r/Homebrewing • u/outlaw2019 • 1d ago
Before, when I used Brewfather or Beersmith I often needed to search up things on the net like the carbonation chart or a quick mash calculator for some random brew. Or a brix to abv calculator since I routinely use a refractometer. Brewersfriend always forced me to login every time just for a quick calc and onebeer for the abv from brix calculator was sometimes down.
So I put all the tools I could think of into BrewHalla.
https://play.google.com/store/apps/details?id=com.brewhalla.beer&hl=en
Here is a list of what is available in the "TOOLS" tab on BrewHalla.
BrewHalla is a free app with all features open including cloud storage. If you like the app, please give it a review on Google Play Store. BrewHalla has been on the Play Store for over six months and we are on the 60th revision. Lot's of features have been added from user suggestions as well as bugs and look/feel things worked out.
If you have any suggestions on how I can improve the app, please comment below!
(iOS is not yet released)
Thank you
r/Homebrewing • u/OutrageousCraft759 • 2d ago
My local homebrew club is trying to recruit more members. I'm the only brewster and would love to get more women into brewing.
What might encourage/encouraged you to brew beer? What events might be a good way to get more women into brewing?
r/Homebrewing • u/Cloudrunner5k • 2d ago
I asked this question in r/mead and got no insights, I figured I would try it here