I just shot and developed my first test sheets of 4x5, but there seems to be many things that are wrong with them technically. I don't mean compositions and the like since they were just test shots. The focus might have been missed since I dropped and cracked the ground glass right before going out to photograph -__-
The film is Fomapan 100 at EI 64 and developed with replenished Adox XT-3 (XTOL) for 3min 20s. The ei and development time I found by testing for zone 1 and zone 9. Lens for the first two pictures is the Rodenstock Sironar-N 150mm f/5.6 and the third picture is with a pinhole. I have attached a picture of the camera with movements from each frame.
The first two photos (taken with a lens) are really underexposed. On the first pic I placed the shadows on zone 3, but they seem to have landed on zone 0? First I thought it was because I forgot to consider the bellows factor, but when I measured the extension it was at 160mm which would make my factor ~1.138 which is barely a third of a stop. Did I measure incorrectly? Do you have to change where you measure based on the rear movements? In my case rear tilt.
On all photos, but most prominently on the last one, I have marks from my stearman press sp-445. It looks like the negative holders have imprinted themselves on the negative. What could have caused this?
So to summarize my questions are: 1. Why are the first two pics severely underexposed? 2. Why did the developing tank leave marks on my negatives?