r/largeformat • u/Classiccameras • 7h ago
Photo 4x5. Ilford Delta 100.
Rapids, Yarra River near Warrandyte.
r/largeformat • u/Classiccameras • 7h ago
Rapids, Yarra River near Warrandyte.
r/largeformat
•
u/ppbz_ti
•
3h ago
Rated at box speed and exposed 1/15s at f/22. Developed in Acurol-N 1:50 for 10 minutes.
I got very thin negatives from the series of four photographs I took this one from, but pretty happy nonetheless. I think I'll have to start using the zone system more consistently in the future.
r/largeformat • u/FilipFje • 16h ago
I just shot and developed my first test sheets of 4x5, but there seems to be many things that are wrong with them technically. I don't mean compositions and the like since they were just test shots. The focus might have been missed since I dropped and cracked the ground glass right before going out to photograph -__-
The film is Fomapan 100 at EI 64 and developed with replenished Adox XT-3 (XTOL) for 3min 20s. The ei and development time I found by testing for zone 1 and zone 9. Lens for the first two pictures is the Rodenstock Sironar-N 150mm f/5.6 and the third picture is with a pinhole. I have attached a picture of the camera with movements from each frame.
The first two photos (taken with a lens) are really underexposed. On the first pic I placed the shadows on zone 3, but they seem to have landed on zone 0? First I thought it was because I forgot to consider the bellows factor, but when I measured the extension it was at 160mm which would make my factor ~1.138 which is barely a third of a stop. Did I measure incorrectly? Do you have to change where you measure based on the rear movements? In my case rear tilt.
On all photos, but most prominently on the last one, I have marks from my stearman press sp-445. It looks like the negative holders have imprinted themselves on the negative. What could have caused this?
So to summarize my questions are: 1. Why are the first two pics severely underexposed? 2. Why did the developing tank leave marks on my negatives?
r/largeformat • u/sugnaz • 13h ago
I have a Benro carbon fibre with the ball + panoramic head (1,4kg for the tripod + head) I use for 6x17 (Fuji GX617 Professional). I have just ordered a Chamonix 45F-2. I have had issues with the stability of this plate and camera twisting with larger cameras (Wista).
Do you have big plates?
I have been eyeing the Arca Swiss Monoball Z+ which is ideal except for the weight of half my hiking tripod.
Any thoughts welcome. Of course stability is essential with 4x5.
r/largeformat • u/Sail_Soggy • 5h ago
New to the gang and learned that a darkcloth may not be as optional as I thought!
Btzs seems to be the go to, but postage to the uk is killer, and that’s before any duty etc
Came across paramo and seems about the same, but would prefer first hand accounts if possible
Similarly if any uk folks have used any cheaper brands and think they’re al worth a punt let me know 😊
https://www.linhofstudio.com/products/Focusing-Dark-Cloths-LInhof-paramo-harrison/Paramo_Dark_Cloth