r/modelmakers • • 1d ago

The Weekly Small Questions Thread! Got a burning question? Looking for some tips on your build? Ask away!

0 Upvotes

The Weekly Small Questions thread is a place for everyone in /r/modelmakers to come and ask questions. Don't be shy.

You might have a burning question you've been meaning to ask but you don't want to make your own thread, or are just seeking some input or feedback from your fellow builders! This thread is aimed at new builders, but everyone is welcome.

If you haven't, check out our local wiki and the "New to the hobby" thread, which might be of help to you!


r/modelmakers • • 5h ago

Completed Strike eagle that isn't that bad

Thumbnail
gallery
99 Upvotes

Idk the academy 1/48 f-15 isn't as bad as some people say it is. I think it's pretty decent, has a great amount of weapon and good enough detail for it's price


r/modelmakers • • 6h ago

Completed Messerschmidts

Thumbnail
gallery
99 Upvotes

So in answer to the person who said I should build a proper 109f after the Messerschitzel. here it is. Hasegawa 109F trop with Eduard big ed set and kit decals. The next one on the bench is an Eduard 109E3 in BoB colors


r/modelmakers • • 6h ago

Completed My first model

Post image
79 Upvotes

It was a pain in the ass and kinda ugly but i like it


r/modelmakers • • 18h ago

REFERENCE hobby shops in hongkong (and guangzhou!)

Thumbnail
gallery
690 Upvotes

pics 1-4: Continental Hobby in Jordan
5-7: Wang Kee in Mong Kok
8-11: Tamiya Plamodel Factory at Yau Ma Tei
12: my haul!

Hongkong has several hobby shops, and i visited some of them on my recent trip. This list is not comprehensive, as i only visited the ones near the usual tourist attractions. feel free to add more shops if you know of any!

For me, the best by far was Continental Hobby. It had the widest variety of brands, scales, subject matter. Tamiya, Hasegawa, Miniart, Meng, AFV, Takom, HK models, Fujimi, Bandai (gunpla) etc. got a clear edition tamiya fairey swordfish here.

the second best would be Wang Kee, which had two floors (the second being mainly Trumpeteer, HobbyBoss, all 50% off). this one i feel had a wider selection of Tamiya kits than continental, but lacked the same breadth of brands.

the other military kit shops i visited included Twinner Trading Company, and the Tamiya shop. Twinner had a smaller but still decent selection of military models than the other two. They had more gunpla though. And the Tamiya shop, while cool, had pretty ridiculous prices compared to the others. still worth a visit for the vibes if you’re nearby.

honourable mention in Guangzhou: Man Wah Models near Beijing Road. a mere 1hr high speed train ride away, this was one of the most comprehensive military scale model shops i’ve been to in Asia. prices here were roughly the same as what you would be able to find on shopping sites like Taobao or Pinduoduo but it’s still cool to see the kits in person.


r/modelmakers • • 49m ago

WIP Really happy with how my Tamiya 1/35 R35 is coming along!

Thumbnail
gallery
19 Upvotes

Finally got some time to make some progress on my R35 and extremely happy with how its turning out. Tried a lot of new stuff on this model like oil dot filtering, eduard photoetch, making my own tarps and carving a styrofoam base. Was a bit hesitant to try everything on the same model at once but glad that I did! Now I just have to finish up the base and add the jankiest PE but after that its done!


r/modelmakers • • 19h ago

Completed 1/72 Martin B-26G Marauder

Thumbnail
gallery
481 Upvotes

This is the Eduard boxing of the Hasegawa B-26G Marauder, these later mark B-26's had a different angle of incidence wing. I handbrushed this with AK3G, Tamiya & Vallejo acrylics all straight from the jar/bottle with no primer or thinners added. Tamiya weathering powders beat up the olive drab and AK panel liner helped accentuate the overall look.

Thanks for looking 🙂


r/modelmakers • • 4h ago

Completed PT-91 Twardy in 1/35 by Amusing Hobby

Thumbnail
gallery
25 Upvotes

r/modelmakers • • 9h ago

Completed Tamiya M18 Hellcat

Thumbnail
gallery
56 Upvotes

My favorite kit of all time. My wife took the pics. Open to any feedback, I’m always looking to improve


r/modelmakers • • 11h ago

WIP Change of plans on the Persian Cat

Thumbnail
gallery
69 Upvotes

Well i switched paint schemes on the Persian Cat.

Wasnt happy with my Asia Minor colors, just couldnt get the mixes right so i switched to the later air superiority scheme, it looks better but sadly i can no longer mount the MIM 23 Hawk missiles i planned

Looks kinda neat with the two paint schemes lol


r/modelmakers • • 21h ago

Completed US Air Force reconaissance DH.98 Mosquito, revell 1/32 scale

Thumbnail
gallery
395 Upvotes

Final photoshoot of my 1/32 mosquito, i've hesitated a lot before finally settling on this pretty unique paint-scheme which I think looks beautiful on the Mossie, my idea while painting and weathering it was to make it look like the aircraft flew straight through heavy flak fire during multiple missions while taking photos of important german sites (like V1 launchsite or coastal batteries) and this is how it looked like after a few missions in these conditions, with some if its panels replaced by news ones (hence the naked aluminium parts) and the paint chipped and worn away revealling the wood underneath. I had a lot of fun painting this model, it's an old kit but it's an impressive piece and I will probably make another one someday.


r/modelmakers • • 4h ago

WIP Focke Wulf A-8 Interior

Thumbnail
gallery
16 Upvotes

Decided to paint the dash instead of using decals.
Scratch built an okay looking harness.
Tamiya 1:48 Focke Wulf A-8.


r/modelmakers • • 17h ago

Completed Erich Hartmann's Bf 109G-14 (Revell Bf 109G-6 Early/Late + Eaglecals 32-036)

Thumbnail
gallery
98 Upvotes

This one has to be, at least, the 7th Bf 109G-6 I've built from Revell in 32nd. The Hasegawa Bf 109G-6 kit is better in that it doesn't have flash and the fit is more precise. However, the Revell kit comes with parts for two variants (G-6 early and late) and the possibility to build it as a G-14 with what comes inside the box. The Hasegawa kit is also OOP for now, and it commands silly prices on eBay.

The main downside of the Revell kit is the flash that some parts have (the Late gunsight being more flash than part), and the thick sprue tabs some parts have. I broke one of the gear legs trying to remove it from the sprue, I used a Meng sidecutter. I solved it by gluing the leg to the gear door and using it as a jig to properly align it.

For the scheme I used a mix of two decal sources: The tulips are from the Revell 32nd Bf 109G-10 "Bubi" Hartmann, and the other decals came from the Eaglecals 32-036 sheet "The Blond Knight." Eagle Editions didn't make cuts for the engine scoops of the nose, whereas the Revell decals did have them. The Revell decals needed some persuation with Microsol, but the Eaglecals didn't need any softener to conform onto the panel lines.

Last pic is with Gerhard Barkhorn's Fw 190D-9. The two were the Top Guns of the Luftwaffe, with a total of 653 kills between the two, and both flew mainly with JG52. Barkhorn went to JG6 near the end of WW2, and Hartmann remained with JG52 after a short stint with JG53 in Vezsprem, Hungary.


r/modelmakers • • 20h ago

Completed Mazda t2000 1/32 MicroAce

Thumbnail
gallery
164 Upvotes

From last year, to make you patient until the end of my next project early 2027.


r/modelmakers • • 14h ago

Completed My TAMIYA 1:35 Panzerkampfwagen IV Version D

Thumbnail
gallery
54 Upvotes

Kit: https://www.tamiya.de/tamiya_de/kategorien/plastikmodellbau/militaer-modellbau/militaer-modellfahrzeuge-1-35/tamiya-1-35-dt-kampfpanzer-iv-f-plastikmodellbausatz-300035374-de.html

I was able to assemble the model without any significant problems—only the somewhat ambiguous instructions required a bit of guesswork and additional research: There were four possible variants (early, mid, late, and desert), and it wasn’t always entirely clear which parts belonged to which version.

Otherwise, I used my usual techniques here: silver and rust patterns as a primer, followed by a spritz of hairspray, and then the actual paint. I then rubbed the paint off in certain areas with a damp brush, and added some washes and brown oil paint to create a rust effect.

For one of the photos, I used a long exposure: Using a motorized table dolly, I moved an LED light around the tank; the last photo shows the setup.

 

The historical tank: The Panzerkampfwagen IV (PzKpfw IV or Panzer IV for short) was a German medium tank of World War II. Initially produced in very small numbers, the Panzer IV—developed by Krupp and manufactured from 1937 until the end of the war—became the most widely produced German tank, with 8,500 units built. Initially equipped with a short-barreled gun, the tank was originally intended as a support vehicle; however, its range of operations changed fundamentally with the installation of a long-barreled gun. Although it did not achieve the same level of fame as a Panther or Tiger due to its reception in military literature, it was the most important German tank* in the second half of the war. The tank was deployed in various configurations on nearly all fronts. In addition, its chassis served as the basis for numerous other weapon platforms.

Source: Wikipedia

*Military History Visualized disputes this view: https://youtu.be/waW1-UeGawQ?si=RytU1rpOx_DPcZ4E


r/modelmakers • • 13h ago

Critique Wanted New to models making diorama

Thumbnail
gallery
42 Upvotes

Got a ways to go but would like opinions


r/modelmakers • • 1h ago

Critique Wanted Custom painted Imperial Patrol Speeder in a Corellian back-alley diorama (1/28 Revell kit + scratch-built terrain)

Thumbnail
gallery
4 Upvotes

r/modelmakers • • 11h ago

Completed Pe-2 zvedza finish

Thumbnail
gallery
24 Upvotes

reviews and rating :) ?


r/modelmakers • • 23h ago

Critique Wanted Airfix 1/24 Mosquito

Thumbnail
gallery
163 Upvotes

A few photos of the Airfix 1/24 Mosquito I made back in 2024.


r/modelmakers • • 15h ago

Critique Wanted My first ever scale model!

Thumbnail
gallery
33 Upvotes

Hello ! Some time ago I was searching for some realistic military lego (and cheap ) , every time i searched lego military I was finding plastic models (like this one ) , I ignored them for some time , finally I gave in and started looking thru plastic models (mostly out of boredom because I wasn't finding anything that i liked ) and I started finding model sets that were looking really cool adn had a lot of details (and were prety cheap) . I started watching some youtube videos about plastic modelling and doing some research . My main turn off for plastic modelling was the fact that you had to buy glue and colors separate , bur i found out that starter sets/gift sets exist , I became more intrest in this hobby , I started to search starter sets online , I found 2 that i liked very much , one was a Leopard 2a4 and the other a Panther(this is the one in the photo) . I watched some YouTube videos with tips for begginers and i thought it was very intresting . I looked up what tools whould you need , I came to the conclusion that i should get the bare-minimum because what if I didn't like this hobby? Then came the set , I chose the Panther because it was cheaper than the Leopard 2 and i though "i don't want to waste money if I don't like it " . I placed the order , I waited , it came , I knew what to expect from the box because i watched many videos about scale modeling . I started the project at 8 p.m , i worked on it until 12 p.m , i didn't even noticed how the time had passed. Step 1 plus step 2 took me 30 minutes , it was the part where i had to put the road wheels on . The tracks were a massive pain, I kept dropping the link and couldn't put them nice , the next set i hope i find a tank with ruber tracks .

The project (the tank + the dioram made out of carboard, paper towels ,dirt and moss) took me around 9 hours in toal , I am going to say that it was very fun and enjoying , best money i spent on something. I felt very proud when I finally got everything over , i tried as much as i could to add details , but the this is how much I could .

I post this to maybe get an opinion from people who have more experience in this hobby and find out how bad I did .

If you have an recommendation for a set (any set , not only starter sets ,I am hooked) I whould love to hear!

The set is : Revell 1:72 Panther Ausf. G


r/modelmakers • • 22h ago

WIP I've been building tools with a game engine to help animate my tabletop models

Post image
120 Upvotes

I've been building my game (Ares Inception) for years and have also been a lifelong model builder. As someone with a hundred hobbies, I've integrated them into my game by building tools that allow me to play it in many different ways.

Since I design in 3D, I can print and paint the structures and vehicles and I carve the landscapes out of foam. I 3D scan the handmade landscape, which I then use in the game, allowing me to have both a virtual version of the tabletop build and a physical build of the game setting.

Then I have been using Unreal to create in-game tools that display a background on extra monitors and feed an overhead view fed to a projector mounted above the tabletop, which projects the game's dynamic elements onto the model. The crew, weather, day/night cycles are shown in real time as you play the game.

None of this is necessary to play the game, they are just additional tools in case a fellow gamer is also a physical modeller like myself.

The game is a Mars mission simulator viewed from the perspective of the mission systems, drones, rovers, electronics. You don't control the crew; you only help and schedule them. As long as the crew is happy and healthy, they stick to the directions.

https://store.steampowered.com/app/4512810/Ares_Inception/


r/modelmakers • • 9h ago

WIP A pair of F-14.. and….

Post image
11 Upvotes

Two F-14s, a shot of mezcal, and VT vs. Miami…


r/modelmakers • • 1d ago

Completed DeHavilland Mosquito FB.Mk.IV.Tamiya 1/48

Thumbnail
gallery
296 Upvotes

r/modelmakers • • 58m ago

Help - Tools/Materials Missing parts from a 1:48 Hasegawa kit

2 Upvotes

Hi all, on the off- chance, anyone has part # Q5 and Q10 from the 1:48 Hasegawa Mitsubishi F-2B to sell? Or an email contact to Hasegawa or their UK distributor to buy the sprue "Q" from this kit?

TIA.


r/modelmakers • • 10h ago

WIP K-2S0 Build

Post image
12 Upvotes

Weathered and installed the shoulder rings. Next step is to apply decals and weather the arms.