Last month, I headed to Seoul to see the newest Tandem WOLED gaming monitor technology in person. I got a look at the current panels, and more importantly, what’s coming next.
Disclosure up front: LG Display invited me to this event and covered part of my travel. All opinions are my own.
Before I get into all of the phenomenal new features I saw, here’s a quick refresher on where Tandem WOLED gaming monitor panels stand right now:
The stack: Primary RGB Tandem 2.0 stacks four separate emission layers (B-G-B-R) that together produce white light, which then passes through an RGB or RGBW color filter. The "W" in WOLED is the white light, not the white subpixel.
Speed: Up to 540Hz with 0.02ms GtG at native resolution, and up to 720Hz on Dual Mode models. The 540Hz panels hold VESA's ClearMR 21000 certification.
Brightness: Up to 1,500 nits peak in HDR (1.5% APL) with DisplayHDR True Black 500, and up to 355 nits typical in SDR.
Color: 99.5% DCI-P3, with Intertek certifying Delta E ≤2 color fidelity up to 500 lux.
Ambient light: 1.1% reflectance, plus UL Perfect Black, Perfect Color, and Perfect Reproduction certifications up to 500 lux.
Subpixels & text: Most current panels use an RGBW stripe, arranged R-G-W-B. RGB stripe panels are also available, which trade some brightness for improved color volume and significantly better text clarity.
Eye comfort: Eyesafe CPF60 and RPF40 certified, plus UL Discomfort Glare Free.
Form factor: A 1-glass structure allows curves down to 800R, along with 4-sided borderless designs and 21:9 ultrawides.
Lineup:
27” 16:9 at 1440p or 4K, with native refresh rates from 240Hz to 540Hz
31.5” 16:9 at 4K, with native refresh rates from 165Hz to 240Hz
34” 21:9 at 1440p, with native refresh rates at 240Hz
39” 21:9 at 1440p or 5K2K, with native refresh rates at 240Hz and 165Hz respectively
45” 21:9 at 1440p or 5K2K, with native refresh rates at 240Hz and 165Hz respectively
Now for the part I’ve been most excited to share: what’s next for Tandem WOLED:
1. 720Hz at native 1080p (and it's glossy)
Two new 24.5-inch esports panels featuring Tandem WOLED technology are in production, with ASUS among the first to use them. One runs at 540Hz and the other at 720Hz, both at native 1080p, meaning no dropping resolution to hit the top refresh rate like current Dual Mode panels. They’re also glossy, which is interesting since esports monitors have traditionally gone matte.
This particular demo had these colored boxes shifting across the screen, running next to a 600Hz LCD with backlight strobing. The LCD had visible light-colored trailing behind moving objects — especially with the blue — while the Tandem WOLED panel stayed crisp.
540Hz Tandem WOLED on the left, 600Hz LCD with backlight strobing on the right.
On paper, 540Hz and 720Hz Tandem WOLED panels don’t sound massively faster than a 600Hz LCD, but this is where Tandem WOLED's 0.02ms rapid response time does the heavy lifting. Refresh rate alone doesn't tell the whole story if the pixels can't keep up. This was clear in the demo, as the 540Hz Tandem WOLED was visibly clearer than the 600Hz LCD despite the technically lower refresh rate, while the 720Hz Tandem WOLED was the clear winner.
In practice, that means clearer, more natural motion, especially in fast-paced FPS and esports games. It’s also why Tandem WOLED earned VESA’s ClearMR 21000 certification, the highest motion clarity tier VESA offers.
2. Glossy 0.3% reflectance with new SAR coating
This is the one I was most excited about. Current Glossy Tandem WOLED panels with AR coating sit at 1.1% reflectance with no raised blacks from ambient lighting, which is already the primary reason I prefer WOLED. A new SAR (Super Anti-Reflection) coating at 0.3% was showcased side by side with the current AR (Anti-Reflection) at 1.1% and AGLR (Anti-Glare Low-Reflection, AKA Matte) at 1.7%. I asked for all the bright LED overhead lights to be turned on to capture the difference, and this was the result:
From left to right: AGLR, AR, SAR. Stars from in-game content were removed for licensing; I verified with a removal mask that the reflections weren’t touched.
In both the room-light reflections and the reflection of another monitor, the SAR coating excelled. For the nerds in the room, the reflectance percentage was measured at 550nm, which is near the peak sensitivity of light for human eyes. I already loved glossy Tandem WOLED panels with their deep blacks, but this brings it to yet another level. The timing of this coating is still under review, but it is expected to be available for purchase in the near future.
3. 27" 5K at 220 PPI with RGB Stripe
A 27” 5K panel with 220 PPI and an RGB stripe was also on display. For reference, 27" 4K is about 166 PPI, so this is a big jump in sharpness. The clarity of this monitor was absolutely astonishing.
For anyone who does creative work, especially on a Mac, this will be top-tier, since 220 PPI matches the pixel density macOS is designed to scale for. They’re targeting a 120Hz refresh rate with a TrueBlack 400 rating. This one is still a prototype with no monitor announced yet, so don't hold your breath.
4. TrueBlack 1000
Current panels top out at TrueBlack 500. A new 27-inch 540Hz panel featuring TrueBlack 1000 and peak brightness of up to 2,000 nits was showcased. While I unfortunately can’t show a picture due to licensing, the near Mini LED brightness with zero blooming looks truly incredible. The panel is designed to achieve up to 2,000 nits at 2% APL and approximately 560 nits at 100% APL. However, don’t get too excited: there is no official release date, so think of it as where the tech is heading rather than something you’ll buy next year.
5. Tandem WOLED vs RGB Mini LED
While this currently only applies to TVs, I wanted to touch on it as RGB Mini LED monitors are starting to come out. Blooming can be quite bothersome on traditional Mini LED panels, but RGB Mini LED introduces color crosstalk. It’s a side effect of color dimming with the individual r/G/B LEDs in the backlight, in which the colors in surrounding areas affect one another and appear mixed.
From left to right: Two competing RGB Mini LED TVs and an Tandem WOLED TV
It’s quite visible that on the left and center TVs the white content is slightly color tinted according to the nearby colors, while the Tandem WOLED TV on the right keeps pure whites. For more info on this I’d highly recommend checking out this video from HDTVTest: 1 OLED Takes on 4 RGB Mini LED TVs - Here's What Happened
Recap
All in all, I'm really excited for where this tech is headed. Tandem WOLED was already my go-to for gaming, and after seeing what’s coming next, it's only getting better. Faster speeds, sharper text, brighter HDR, and even lower reflections are all on the way, and I can't wait to get some of these on my desk.
If you have any questions, leave them in the comments and I'll happily answer, or feel free to come chat on Discord.
Title, basically. I am torn between these two and, other than the slight price difference, I have no idea how to decide. Would be for PC Gaming purposes, mostly single player. Thanks for your help!
Text on OLED monitors often has coloured edges because the subpixels are not laid out like a normal RGB stripe. MacType and ClearType tuning cannot fix that, because they do not know where your subpixels physically are.
OLEDTextFix captures the desktop (DXGI Desktop Duplication), resamples each colour channel on the GPU at that colour's real subpixel position, and shows the result in a click-through overlay. It does not touch the apps, the registry or the drivers.
What it has:
- Presets for 9 QD-OLED panel classes, measured from macro photos of 25+ monitors
- WOLED presets (RWBG and RGWB) measured from 13 macro photos. These are NOT tested on real hardware yet, so I would really like feedback
- Pauses for fullscreen games, low overhead (frame skipping, motion bypass), optional separate processing GPU
- Built-in update check (SHA-256 verified)
- MIT licence, built by GitHub Actions from source
Known limits: the overlay adds about one frame of latency, so it is for desktop and text work rather than competitive games. The exe is unsigned, so Windows SmartScreen will warn once.
If you try it, tell me your panel model and what you see (and which preset it picked). If your subpixel layout is different, the README explains how to measure it from a macro photo.
I am currently a bit overhelmed with the options for Monitors and Paneltypes. Basically i search for a good 1440p/ 27 inch Monitor i can use for work and gaming. I do mostly Text work so i have to read a lot of documents and write a lot in word.
I read about OLED/WOLED that its good for gaming and bad for office work, which is bad for me since i am more working than i do gaming. But the Picture quality is better.
My next choice would be Mini-LED but the 1440p Situation is meh i found. Claude recommends me the Xiaomi G Pro 27Qi but I heard it has a lot of problems in terms of Flickering and Dimmering. I am mostly doing work and gaming in a bright room.
I read that the Dell Dell U2724D 27" is okay but it has some a lower refresh rate and its not that of a good option for gaming. My Budget is around 350 Euros and i am located in Germany.
I just got a new miniLED that's supposed to deliver the 1000 nits needed for HDR, while local dimming pushes blacks darker than IPS normally would allow.
I know I should only use HDR mode for HDR content, but the local dimming oddly ONLY works properly with HDR enabled. AOC U27G4XM. Yes, even when local dimming is on 'strong' in the OSD. Weird, yes, but I want to make it work because that's what I feel will give me the most value out of my purchase. Can we not agree that black should be as dark as possible even for those who can't afford the good OLEDs?
I've been fiddling with settings (brightness, contrast, gamma) for about 4 hours over 3 days and I can't get it. I have used Nvidia Control Panel and Gloam, both individually and in tandem.
I've coloured the curves above to show what I want and what I get. Take SDR as 0-100 nits (supposedly that's actually accurate) and call HDR twice as bright. It's not really, but for usability and not needing to change the scale, let's call it that. I don't think the exact number affects the illustration.
Blue - Regular SDR signal in SDR mode. This maps the basic 00-FF signal into DCI-P3, which makes things look really nice, if not for how bright the blacks are with the IPS backlight. Goes only from 0-100.
Red - What I want and expect with HDR on. an SDR signal would simply stay within that box, and an HDR signal would drive the pixels that much brighter, if the signal calls for it. In the SDR zone, black is darker, white is a little brighter I guess, but that's not too important.
Purple - What Windows seems to do to an SDR signal by default, without any tweaks. Just maps the thing directly to the much greater range of HDR, inevitably making every colour except the darkest darks way the heck brighter, even spilling into other colours, turning reds orange for example. I feel like I'm forced to bend this line into a weird curve instead of simply rotating it or scaling it along the x axis.
Green - The best I can achieve with Nvidia Control Panel, or Gloam, or both together. Issues are labeled hopefully readably in the picture, but I'll describe them too.
Darkest darks are crushed. They are darker than #000000 in SDR though.
Quickly after, brightness rises sharply, so that medium-dark tones suddenly get far brighter than SDR. Especially the range used in most apps' dark mode. That kind of darkish grey is what I'm talking about.
Most SDR content is around the upper part of the range, with one colour near the max 255 or FF, or all of them like 100-128, so that's what I tried to match most.
SDR white ends up a little darker than I'd like. I made to to use a large area, full screen even, to eliminate the possibility of it getting locally dimmed.
Based on how mids are bright and highs are dark, yet my gamma is boosted, I assume the gradient is steep at around the end of SDR, which would result in crushed whites in actual HDR content. Maybe I'm wrong about this, and I'll just end up with darker brights on an HDR signal.
Does anyone know how I can make this work? To stick as close to that red line as possible?
Hello, I’m looking for an OLED monitor. I’m currently using an AORUS FI27Q-P, and my system is powered by a Ryzen 7 and an RTX 3070. I’ve spent the last few weeks researching the differences between WOLED and QD-OLED. My room has a window right behind the monitor, meaning light comes in from behind the screen—facing me—so I think a glossy (non-matte) finish might be a better choice. I also have an overhead LED lamp with adjustable intensity. The community seems split between QD-OLED and WOLED, and there’s no clear consensus—it’s almost like politics! I’m currently deciding between these two monitors:
MSI MAG 272QP QD-OLED X50
GIGABYTE MO27Q28GR 27" QHD 280Hz
An AI—which should be neutral—suggests that, despite potential "banding" issues, I should go with WOLED, arguing that its overall pros and cons outweigh those of QD-OLED.
Is the issue with gray-scale banding on WOLED really so significant that it doesn't resolve after a few days of use (including the automatic refresh cycles)? For those of you who are against WOLED: have you actually used one for several days and found that the problem persists, or is your opposition more like a rigid political stance—taking a side just for the sake of it? I’d love to hear from people who have actually tested these displays. Thanks!
Bought this monitor 5 days ago for around 899 (excluding discount code and tax), but now it's 799. This monitor hasn't even arrived yet for me :((
It is out of stock rn, but it will soon get restocked. I also bought mine right after the restock. Anyways, if you guys can grab it at this price, I think it is a great deal.
I plan to buy the gigabyte MO27Q28GR I know it’s a glossy screen and it doesn’t like luminous room How do you feel about my room? I use a desk lamp and the ceiling lamp most of time
I updated windows on my pc and since then my 1st monitor which was a 165hz screen has been stuck at 60hz Idk what I should do in this situation any video I see on YouTube was saying update my drivers but they’re all updated so idk what’s wrong
I was considering buying a monitor with a better quality than IPS, I came across mini led monitors, sharing similar characteristics to OLED ones without burn in, gray banding, and else.
I started researching and these seem to be the most popular in this category, but choosing the panel type is difficult, HVA, VA, IPS... and I don't really know what's the best option.
I started looking through my Odyssey G65B’s service menu because the CRT-style startup animation and pop-ups were bothering me. I disabled the Game Bar and EU energy pop-ups, exposed the Peak Brightness setting, and got Cyberpunk 2077 to trigger HDR10+ Gaming over HDMI. My test setup was a G65B, RTX 4060, and Windows 11.
How I opened the service menu with ColorControl
I enabled IP Remote on the G65B and paired it in the Samsung Controller tab of ColorControl 11 using the secure connection. With the monitor on, I sent KEY_INFO followed by KEY_FACTORY from ColorControl. That opened Samsung’s service menu. The settings below are under FMS → Factory Menu App.
Photograph the original values before editing anything. Menu paths can vary by firmware. Avoid factory reset, panel type, white balance, and calibration actions.
What I changed in FMS
The full feature keys below start with com.samsung/featureconf/.
Game Bar auto-popup — In Option → MRT Option, I set game_bar.auto_launch_support_type to FMS_AUTO_LAUNCH_NOT_SUPPORT.
EU energy prompts — In Option → Production Option, I set setting.eu_energy_regulation to false.
Peak Brightness — In SVC → Other Setting → Expert, I enabled product.peak_brightness to expose the picture control. I didn’t measure a brightness gain.
HDR10+ Gaming — In Option → MRT Option, I enabled setting.menuitem.game.hdr10plus_gaming_support to expose the monitor setting. The PC still needed the EDID override described below.
For the startup animation, welcome_mode.effect_type showed FMS_WM_EFFECT_DEF, FMS_WM_EFFECT_PROJECTOR, and FMS_WM_EFFECT_MLED. There was no visible Off option, and I didn’t verify a way to disable it.
How I edited the HDMI EDID
My original HDMI EDID didn’t advertise HDR10+ Gaming. I added an HDR10+ Source Side Tone Mapping (SSTM) data block to EDID block1, the first CTA-861 extension on my unit. This was a Windows override.
Back up your HDMI EDID and existing overrides. Identify the active HDMI entry for your monitor in Custom Resolution Utility (CRU) and export its EDID. Back up any existing registry override separately. Have DisplayPort or another screen available in case HDMI goes black.
Locate the CTA-861 extension. On my EDID, it was the 128-byte block starting at file offset 0x80. The first byte was 02. Within that block, byte offset 2 points to the end of the data-block collection and the start of the detailed timing area. Offsets here are zero-based.
Add the SSTM data block. Insert E5 01 8B 84 90 59 at that detailed timing offset. Shift the existing timing data six bytes later and use six bytes of trailing zero padding immediately before the checksum to keep the extension 128 bytes long. Increase the offset stored in byte 2 by six. Recalculate checksum byte 127 so the sum of all 128 bytes is zero modulo 256. Preserve the other EDID blocks and existing CTA data blocks. If your layout differs, there’s already an HDR10+ vendor block, or there isn’t enough padding, stop and inspect your EDID before applying these steps.
Apply only the patched extension. I wrote the edited 128 bytes as the REG_BINARY value named 1 under HKLM\SYSTEM\CurrentControlSet\Enum\DISPLAY\<your HDMI monitor instance>\Device Parameters\EDID_OVERRIDE. Use your own HDMI instance and administrator rights. If a value named 1 already exists, save its exact bytes before replacing it. Microsoft’s EDID override documentation
Reload and verify. Reconnect HDMI or use CRU’s restart64.exe to refresh the graphics driver. A monitor-device restart alone sometimes left NVIDIA using cached EDID data on my PC. Check that your usual resolution, refresh rate, and VRR are still available.
The final byte, 59, represents 600 nits peak and 240 nits full-screen in this test. Those were approximations based on my original EDID. They aren’t colorimeter measurements or calibration values I’d recommend copying to another monitor.
To roll back, restore the previous binary value 1 or remove that value if you created it. Then reconnect HDMI or refresh the graphics driver. Preserve your other overrides. If the screen stays black during a CRU driver restart, CRU documents an F8 recovery mode that temporarily unloads overrides. CRU instructions and recovery
What I actually saw
HDMI: With the override installed, I set the monitor’s HDR10+ Gaming option to Basic and started in regular HDR10. When I enabled HDR10+ inside Cyberpunk 2077, the monitor’s Info panel showed HDR10+ and Samsung’s Game Bar showed HDR10+ Gaming. I didn’t force NVIDIA mode 2 for that Cyberpunk test. While the mode was active, Game HDR (HGiG) was greyed out. Switching HDR10+ Gaming from Basic to Off dimmed the image. An earlier manual test had shown Mode Not Supported.
DisplayPort: With a separate DP override, NVIDIA reported HDR10+ Gaming capability and accepted mode 2. ColorControl showed that mode, but the monitor itself never showed HDR10+ Gaming over DP. I restored my previous DP settings and verified that regular HDR10 was back. NVIDIA’s HDMI-only guidance
The photos show the monitor’s indicators during a manual HDMI test. The Cyberpunk test was separate. Together, the tests show that my G65B recognized the mode over HDMI. I haven’t measured its tone curve or verified HDR10+ movie metadata passthrough from a Windows player.
If anyone reproduces this, I’d be interested in your G65B size, firmware, GPU, game, and what the monitor’s own Game Bar reports.
Hello, I currently have a Yeyian 180 hz ips 1440p monitor and after seeing an OLED monitor I cant not buy one. Im currently deciding between 240 hz AOC Q27G41ZDF QD-OLED 1440p for 250 euros or AOC Q27G4SDR 360 hz 1440p OLED for 450 euros . Is the difference worth 200 euros? I will mostly use them for gaming (story and esports), movies and videos and sometimes some coding. (but mostly gaming)
This is what my nephew has been gaming on with his PS5. With Black Friday deals on our horizon, I’d really like to get him an upgrade to get the max potential out of his PS5 graphics and performance wise. My budget is up to $300. He’s a good kid, 19 years old, still lives at home but works and helps his mom who’s a single mother with bills and keeping an eye on his brothers while she works. Thanks in advance.
I have an MSI MAG 272QP. The problem is that when I boot up my PC, the monitor won't display anything unless I reach into the back and manually press the power button. This problem also occurs when the PC goes into sleep mode. Usually, I only need to shake my mouse or press any button on my keyboard to wake it, but I have to keep pressing the power button to wake the monitor.
I already tried replacing the Power cable and the DP cable, but nothing worked.
Is this a faulty monitor problem, or is something wrong with my monitor settings?