r/pcgamingtechsupport • • 19h ago

Display My Witcher Game Looks terrible

Post image
0 Upvotes

Excited to play the Witcher 4 Remaster and I get these weird blocks on my display, I fiddle around with the game setting and change the anti aliasing etc. and these blocks either stay, or the game becomes so grainy that it looks unplayable, am i due for an upgrade?

GPU - 1060 6gb I know its outdated

CPU - Ryzen 5 2600

16gb DDR4

400w Bronze PSU

MOBO MSI tomahawk MAX


r/pcgamingtechsupport • • 7h ago

Controls/Input This bug has ruined my aiming. Mouse stops registering mouse movement for a second.

0 Upvotes

Thanks for sharing. Tbh I just got a new mouse. My previous mouse was a razer viper ultimate. Same issue. Not just letting go the scroll wheel and the side buttons. They just don't respond for a second or a second and a half. Making feel like my inputs don't respond when I hold down my left click. I now have a onikuma mouse it's exactly the same issue. I have had 3 laptops this bug has followed me like a plague. It happened on all 3.i recently got an Acer 3050ti i5 12th gen. Still having the same issue. I'm at my last straw at this point.

I am trying to game and stream but this bug isn't letting me aim properly I'm go one second the next minute I can't even move my mouse every 5 seconds. It lasts for a second or 2 every 5 to 6 seconds. The mose won't register mouse movement, only clicks or whatever button I was holding down before the bug starts. It happens to all buttons even scroll wheel doesn't register for a second I have to reinput the key.

Sometimes when I switch from dongle to wire it disappears for a few minutes den it returns while I am connected through wire. It's annoying to say the least. I play apex legends where I use scroll up and down to bunny hop by bunny hops are inconsistent because of this bug sometimes my scroll wheel won't register not just mouse movement.


r/pcgamingtechsupport • • 6h ago

Troubleshooting New AM5 build: slow BIOS fixed by a new motherboard, but Windows still freezes and NVMe resets (stornvme 129) keep climbing. What's next?

2 Upvotes

TL;DR: The 7800X3D build took 1-5 min to boot, with NVMe timeout errors. Swap testing showed the old ASUS board caused the slow POST. A new MSI board fixed the BIOS time, but Windows still hangs, apps show "not responding," and stornvme 129 events keep increasing. Before I reinstall Windows on a spare SSD, what would you check?
Specs (friend's PC, all bought new)
CPU: Ryzen 7 7800X3D
Board: ASUS ROG STRIX B650-A GAMING WIFI (BIOS 3881, June 2026, later updated)
RAM: Patriot Viper Venom 32GB (2x16) DDR5-6000 CL30, in A2/B2
GPU: Radeon RX 9070 XT
SSD: Klevv CRAS C910 1TB NVMe
Cooler: Thermalright Peerless Assassin 120 SE
PSU: MSI MAG A750GL PCIE5
Windows 11
My own PC is nearly identical (different RAM brand, CL30 6000 kit, different motherboard, different case, different cpu cooler, and we have the same ssd brand but instead od the 1tb version I have the 2 tb) and has no issues.
Original problem
Boots took anywhere from 1 min to nearly 10 min, with a long black screen before the ASUS logo, occasional sluggishness, and stornvme Event ID 129 ("Reset to device, \Device\RaidPort1") in Event Viewer. 27 events at first.
What I tried on the ASUS board
EXPO I / DDR5-6000: Last BIOS time ~57 sec. EXPO off (4800): ~9-10 sec.
Memory Context Restore = Enabled: boot hung on a black screen for 3+ min, and the BIOS then froze. Fixed with a CMOS reset.
Power Down Enable = Enabled: no change (56.7 sec).
Reseated the SSD: two 40-sec restarts at 4800.
OCCT memory test at 6000: 30 min, 0 errors.
CrystalDiskInfo: 100% health, 0 media errors.
BIOS updated.
Swap tests
Setup BIOS time
His board, his RAM, EXPO on 57 sec
His board, my RAM, EXPO on 33 sec
His board, my CPU + my RAM 38-39 sec
My board, his CPU + RAM + GPU + SSD 11.5-12.8 sec
My own PC (reference) ~11 sec
His parts were fast on my board. That pointed at his ASUS board for the BIOS slowness.
New board: MSI MAG B850 Tomahawk WIFI. BIOS flashed to version 7E53v1A44. After install: ~17 sec BIOS, ~45 sec to Windows. EXPO/A-XMP enabled.
What's still wrong
Windows has been slow or unresponsive in nearly every test: on his old board, with my CPU in it, on my board, and on the new board.
I reset the pc multiple times are changing the mobo, updating bios, making sure all drivers were installed and up to date, and making sure windows was up to date. Each time I restarted the pc it seemed as if the issues was fixed completely and there were no new 129 errors. Later on in the day though I get a call from my friend. Several apps showed "not responding" at once, and it wouldn't restart normally. I had to hold the power button.
The next boot sat at the spinner for about 5 min, then showed a grey screen with a cursor for a few minutes.
stornvme 129 count went 27, then 33, then 36, then 3 more after that. The clock is wrong since the board swap, so I can't trust the timestamps.
Other System log entries: DistributedCOM 10010, SCM 7009 and 7000 (services slow to start).
Where I am
Same Klevv SSD and the same Windows install through all of it. I have a spare WD SN7100 1TB.
Not yet done: fresh Windows on the SN7100 with the Klevv unplugged, and swapping in a same-model PSU.
I'd like to avoid a full reinstall, redownloading every game, and relogging into every app if there's a cheaper test.
Questions
Does this look like a bad Klevv drive, or something shared across every setup like the PSU or GPU?
Is a stripped-down test install on the SN7100 the best next step, or is there a quicker check?
Any known issues with this Klevv SSD on AM5 that I should look up?


r/pcgamingtechsupport • • 19h ago

Performance/FPS fps issue when playing

2 Upvotes

ive been having this problem for a while, after playing for 20 minutes the game starts doing this, happens both with and without the lighting engine (mod). I've tried reinstalling or rolling back drivers, checked for file integrity, changed graphic settings and nvidia control panel settings. Does anyone have an idea on what's causing this?

https://userdiag.com/id/cYURa6rHNI


r/pcgamingtechsupport • • 21h ago

Solved I found a way to play Steam games that require an Xbox controller using your keyboard.

2 Upvotes

One day, I was scrolling through YouTube and stumbled upon a video about a horror game I found interesting, and I wanted to play it and experience it myself. The game is called House of Velez.

The thing that I didn’t know before downloading it was that the keyboard didn’t work because it didn’t support it. It was specified on the game's Steam page that I needed an Xbox 360 controller to play it. 

To fix that issue, I had to turn my keyboard into an Xbox 360 controller since I didn’t have one lying around in my room.

In this guide, I’ll walk you through the same steps I took to turn my keyboard into a controller for those kinds of games.

Step 0: Software That You Will Need

Certain games you will encounter on Steam only support an Xbox 360 controller to play them.

At first, I didn’t know how to do it, and I was pretty sure that there was a workaround without buying an Xbox 360 controller for just one game.

The first thing I did was ask ChatGPT for a way to turn my keyboard into a joystick. It stated that I need two things:

The first was ViGEmBus, the actual driver that emulates virtual gamepads and acts as a foundation for mapping software. The second was Keyboard2XInput; I chose it because it’s free and easy to use. It turns your keyboard strokes into Xbox 360 controller inputs.

They both work together to create the Xbox 360 controller emulation we need for Windows 11/10.

Step 1: Download & Install ViGEmBus

First, head to the GitHub repository that holds the latest release of the driver and download it.

The installation isn’t difficult; just click Next until the driver is installed on your system.

The driver may not be fully loaded without a system restart. It’s recommended to do so afterwards.

Step 2: Download & Install Keyboard2XInput

Unlike ViGEmBus, the project Keyboard2XInput lies within GitLab; download the latest release from its repository.

Just like ViGEmBus, the installation is really easy, and you won’t have a hard time doing so.

Once the program is installed, launch it. Once you do so, you won’t see any window or GUI pop up.

At first, I thought that there was some kind of problem because there was no window at all and that the app was literally called “Keyboard2XinputGui.exe”

After so much time trying to figure it out by myself, I decided to read the documentation; it turned out that I didn’t see anything because the program was designed to run in the background.

You will see a new icon in your Windows System tray indicating that it’s running.

You can deactivate the program by left-clicking the icon and right-clicking on “Enable” to uncheck it.

Keep in mind that your mapped keyboard strokes won’t work while the app is running. You need to exit or deactivate the program for the keyboard to function properly.

Step 3: Mapping Your Keyboard

Step 3: Mapping Your Keyboard

Now, to specify which keyboard keys will be mapped to virtual Xbox 360 gamepad buttons, you need to search in the “Keyboard2Xinput” folder for “mapping.ini”.

It looks like this:

[startup]
enabled = true
[config]
Subtract = disable
Add = enable
Divide = enableToggle
Multiply = exit
pollInterval = 0
[pad1]
Up = UP
Down = DOWN
Left = LEFT
Right = RIGHT
LControlKey = A
LMenu = B
LShiftKey = X
W = Y
X = RB
Space = LB
V = RT
C = LT
D5 = START
D1 = BACK

[pad2]
R = UP
F = DOWN
D = LEFT
G = RIGHT
S = B
Q = A
I = Y
Z = X
K = RB
A = LB
L = RT
J = LT
D6 = START
D2 = BACK

It comes predefined with the D-pad button settings, ready-to-play software, or so I was hoping.

After I launched the game, nothing worked. I kept pressing all my keyboard’s keys, hoping that I would find one functional button to confirm that the app was working.

 The game had only three choices in the main menu: “Start”, “Continue”, or “Exit”.

Press and press, and I found one, which was the “Ctrl” button acting like the “A” on the Xbox 360 controller. After I pressed it, the game started, and I confirmed that Keyboard2Xinput was working, and it was a mapping misconfiguration.

The first troubleshooting step I thought of was to turn the idea of turning the arrows Up, Down, Left, Right to WASD movement, and that they weren’t working; they were still mapped to the D-pad on the Xbox 360 controller. I launched the game, but it didn’t work at all.

In my second try, I decided to look at the game files. The game was made with the Construct 2 game engine.

I opened the “package.nw” with WinRAR, and I started searching for something that would lead me to understand how the game was developed by analysing the source code.

The package held all the game’s assets like soundtracks, game over scenes, background scenes, voice-overs, etc.

I wasted so much time doing so to no avail. Maybe it was there, but I didn’t find it. It was really late at night, so I decided to keep trying tomorrow.

In the morning, I found a really interesting website called “GamepadTester” to test the controller by pressing the keys on my keyboard. By doing so, I figured out that I had two controllers, named [pad1] and [pad2], in the “mapping.ini”. 

Keyboard2Xinput had three configurations: either “I-PAC2”, which means two controllers, “I-PAC4” for four controllers on the same keyboard, or “Multiple” for multiple keyboards. I was using “I-PAC2”.

Left Stick / Right Stick vs D-Pad (The Mistake That Took Me Hours)

When I was pressing my keyboard keys on the website, I realised that only the D-pad was being used, and I asked a question that would solve my problem and reward the three to four hours I wasted on my quest to search for a solution.

What if the game was expecting analog instead of D-pad buttons?

You see, analog supports 360° movement, and it’s typically used for the in-game character movement logic, not the main menu logic.

I read the documentation, and I realised that I needed to modify the UP, DOWN, LEFT, and RIGHT to either RUP, RDOWN, RLEFT, and RRIGHT for the right stick analog or LUP, LDOWN, LLEFT, and LRIGHT for the left stick analog.

I removed the UP, DOWN, LEFT, and RIGHT completely because they weren’t doing anything, and I added both the right and left stick analog to my mapping.

After I launched the game, it worked properly; I couldn’t believe it back then. The thing that was remaining to do was remap the keys to my liking by changing the keyboard character keys.

House of Velez Working Configuration

House of Velez uses the left stick analog for the main menu navigation and in-game character movement logic; the working "mapping.ini" config is:

[startup]
enabled = true
[config]
Subtract = disable
Add = enable
Divide = enableToggle
Multiply = exit
pollInterval = 0
[pad1]
R = RUP
F = RDOWN
D = RLEFT
G = RRIGHT
Up = LUP
Down = LDOWN
Left = LLEFT
Right = LRIGHT
LControlKey = A
LMenu = B
LShiftKey = X
W = Y
X = RB
Space = LB
V = RT
C = LT
B = START
N = BACK

[pad2]
R = UP
F = DOWN
D = LEFT
G = RIGHT
S = B
Q = A
I = Y
Z = X
K = RB
A = LB
L = RT
J = LT
D6 = START
D2 = BACK

I'm using both the right and left analog sticks here, and I can also include the D-pad mapping logic if I need to.


r/pcgamingtechsupport • • 18h ago

Compatibility Is her current laptop good enough?

Post image
1 Upvotes

My daughter currently has the HP Victus laptop. We have another 8 gb stick to install into it.

She is saying she wants a new desktop PC, because she wants to play Siege, FNAF, Roblox, and Undertale.

We would rather get her a really nice monitor and keyboard to hook up to the laptop, then spend $$$$ on a new CPU and components right now.

She doesn’t think the Victus’ specs are enough to run those games. I have zero clue when it comes to this stuff. Can anyone help a mom out? Thank you!