r/pcgamingtechsupport • • 11h ago

Assembling issue How can I go about moving with my pc

4 Upvotes

Im currently moving into a city through bus transit and i wanted to at least take my pc with me its a full tower I've checked on Amazon and there are pc carrying cases but idk if its the right choice any advice or tips?


r/pcgamingtechsupport • • 6h ago

Troubleshooting New AM5 build: slow BIOS fixed by a new motherboard, but Windows still freezes and NVMe resets (stornvme 129) keep climbing. What's next?

2 Upvotes

TL;DR: The 7800X3D build took 1-5 min to boot, with NVMe timeout errors. Swap testing showed the old ASUS board caused the slow POST. A new MSI board fixed the BIOS time, but Windows still hangs, apps show "not responding," and stornvme 129 events keep increasing. Before I reinstall Windows on a spare SSD, what would you check?
Specs (friend's PC, all bought new)
CPU: Ryzen 7 7800X3D
Board: ASUS ROG STRIX B650-A GAMING WIFI (BIOS 3881, June 2026, later updated)
RAM: Patriot Viper Venom 32GB (2x16) DDR5-6000 CL30, in A2/B2
GPU: Radeon RX 9070 XT
SSD: Klevv CRAS C910 1TB NVMe
Cooler: Thermalright Peerless Assassin 120 SE
PSU: MSI MAG A750GL PCIE5
Windows 11
My own PC is nearly identical (different RAM brand, CL30 6000 kit, different motherboard, different case, different cpu cooler, and we have the same ssd brand but instead od the 1tb version I have the 2 tb) and has no issues.
Original problem
Boots took anywhere from 1 min to nearly 10 min, with a long black screen before the ASUS logo, occasional sluggishness, and stornvme Event ID 129 ("Reset to device, \Device\RaidPort1") in Event Viewer. 27 events at first.
What I tried on the ASUS board
EXPO I / DDR5-6000: Last BIOS time ~57 sec. EXPO off (4800): ~9-10 sec.
Memory Context Restore = Enabled: boot hung on a black screen for 3+ min, and the BIOS then froze. Fixed with a CMOS reset.
Power Down Enable = Enabled: no change (56.7 sec).
Reseated the SSD: two 40-sec restarts at 4800.
OCCT memory test at 6000: 30 min, 0 errors.
CrystalDiskInfo: 100% health, 0 media errors.
BIOS updated.
Swap tests
Setup BIOS time
His board, his RAM, EXPO on 57 sec
His board, my RAM, EXPO on 33 sec
His board, my CPU + my RAM 38-39 sec
My board, his CPU + RAM + GPU + SSD 11.5-12.8 sec
My own PC (reference) ~11 sec
His parts were fast on my board. That pointed at his ASUS board for the BIOS slowness.
New board: MSI MAG B850 Tomahawk WIFI. BIOS flashed to version 7E53v1A44. After install: ~17 sec BIOS, ~45 sec to Windows. EXPO/A-XMP enabled.
What's still wrong
Windows has been slow or unresponsive in nearly every test: on his old board, with my CPU in it, on my board, and on the new board.
I reset the pc multiple times are changing the mobo, updating bios, making sure all drivers were installed and up to date, and making sure windows was up to date. Each time I restarted the pc it seemed as if the issues was fixed completely and there were no new 129 errors. Later on in the day though I get a call from my friend. Several apps showed "not responding" at once, and it wouldn't restart normally. I had to hold the power button.
The next boot sat at the spinner for about 5 min, then showed a grey screen with a cursor for a few minutes.
stornvme 129 count went 27, then 33, then 36, then 3 more after that. The clock is wrong since the board swap, so I can't trust the timestamps.
Other System log entries: DistributedCOM 10010, SCM 7009 and 7000 (services slow to start).
Where I am
Same Klevv SSD and the same Windows install through all of it. I have a spare WD SN7100 1TB.
Not yet done: fresh Windows on the SN7100 with the Klevv unplugged, and swapping in a same-model PSU.
I'd like to avoid a full reinstall, redownloading every game, and relogging into every app if there's a cheaper test.
Questions
Does this look like a bad Klevv drive, or something shared across every setup like the PSU or GPU?
Is a stripped-down test install on the SN7100 the best next step, or is there a quicker check?
Any known issues with this Klevv SSD on AM5 that I should look up?


r/pcgamingtechsupport • • 19h ago

Performance/FPS fps issue when playing

2 Upvotes

ive been having this problem for a while, after playing for 20 minutes the game starts doing this, happens both with and without the lighting engine (mod). I've tried reinstalling or rolling back drivers, checked for file integrity, changed graphic settings and nvidia control panel settings. Does anyone have an idea on what's causing this?

https://userdiag.com/id/cYURa6rHNI


r/pcgamingtechsupport • • 21h ago

Solved I found a way to play Steam games that require an Xbox controller using your keyboard.

2 Upvotes

One day, I was scrolling through YouTube and stumbled upon a video about a horror game I found interesting, and I wanted to play it and experience it myself. The game is called House of Velez.

The thing that I didn’t know before downloading it was that the keyboard didn’t work because it didn’t support it. It was specified on the game's Steam page that I needed an Xbox 360 controller to play it. 

To fix that issue, I had to turn my keyboard into an Xbox 360 controller since I didn’t have one lying around in my room.

In this guide, I’ll walk you through the same steps I took to turn my keyboard into a controller for those kinds of games.

Step 0: Software That You Will Need

Certain games you will encounter on Steam only support an Xbox 360 controller to play them.

At first, I didn’t know how to do it, and I was pretty sure that there was a workaround without buying an Xbox 360 controller for just one game.

The first thing I did was ask ChatGPT for a way to turn my keyboard into a joystick. It stated that I need two things:

The first was ViGEmBus, the actual driver that emulates virtual gamepads and acts as a foundation for mapping software. The second was Keyboard2XInput; I chose it because it’s free and easy to use. It turns your keyboard strokes into Xbox 360 controller inputs.

They both work together to create the Xbox 360 controller emulation we need for Windows 11/10.

Step 1: Download & Install ViGEmBus

First, head to the GitHub repository that holds the latest release of the driver and download it.

The installation isn’t difficult; just click Next until the driver is installed on your system.

The driver may not be fully loaded without a system restart. It’s recommended to do so afterwards.

Step 2: Download & Install Keyboard2XInput

Unlike ViGEmBus, the project Keyboard2XInput lies within GitLab; download the latest release from its repository.

Just like ViGEmBus, the installation is really easy, and you won’t have a hard time doing so.

Once the program is installed, launch it. Once you do so, you won’t see any window or GUI pop up.

At first, I thought that there was some kind of problem because there was no window at all and that the app was literally called “Keyboard2XinputGui.exe”

After so much time trying to figure it out by myself, I decided to read the documentation; it turned out that I didn’t see anything because the program was designed to run in the background.

You will see a new icon in your Windows System tray indicating that it’s running.

You can deactivate the program by left-clicking the icon and right-clicking on “Enable” to uncheck it.

Keep in mind that your mapped keyboard strokes won’t work while the app is running. You need to exit or deactivate the program for the keyboard to function properly.

Step 3: Mapping Your Keyboard

Step 3: Mapping Your Keyboard

Now, to specify which keyboard keys will be mapped to virtual Xbox 360 gamepad buttons, you need to search in the “Keyboard2Xinput” folder for “mapping.ini”.

It looks like this:

[startup]
enabled = true
[config]
Subtract = disable
Add = enable
Divide = enableToggle
Multiply = exit
pollInterval = 0
[pad1]
Up = UP
Down = DOWN
Left = LEFT
Right = RIGHT
LControlKey = A
LMenu = B
LShiftKey = X
W = Y
X = RB
Space = LB
V = RT
C = LT
D5 = START
D1 = BACK

[pad2]
R = UP
F = DOWN
D = LEFT
G = RIGHT
S = B
Q = A
I = Y
Z = X
K = RB
A = LB
L = RT
J = LT
D6 = START
D2 = BACK

It comes predefined with the D-pad button settings, ready-to-play software, or so I was hoping.

After I launched the game, nothing worked. I kept pressing all my keyboard’s keys, hoping that I would find one functional button to confirm that the app was working.

 The game had only three choices in the main menu: “Start”, “Continue”, or “Exit”.

Press and press, and I found one, which was the “Ctrl” button acting like the “A” on the Xbox 360 controller. After I pressed it, the game started, and I confirmed that Keyboard2Xinput was working, and it was a mapping misconfiguration.

The first troubleshooting step I thought of was to turn the idea of turning the arrows Up, Down, Left, Right to WASD movement, and that they weren’t working; they were still mapped to the D-pad on the Xbox 360 controller. I launched the game, but it didn’t work at all.

In my second try, I decided to look at the game files. The game was made with the Construct 2 game engine.

I opened the “package.nw” with WinRAR, and I started searching for something that would lead me to understand how the game was developed by analysing the source code.

The package held all the game’s assets like soundtracks, game over scenes, background scenes, voice-overs, etc.

I wasted so much time doing so to no avail. Maybe it was there, but I didn’t find it. It was really late at night, so I decided to keep trying tomorrow.

In the morning, I found a really interesting website called “GamepadTester” to test the controller by pressing the keys on my keyboard. By doing so, I figured out that I had two controllers, named [pad1] and [pad2], in the “mapping.ini”. 

Keyboard2Xinput had three configurations: either “I-PAC2”, which means two controllers, “I-PAC4” for four controllers on the same keyboard, or “Multiple” for multiple keyboards. I was using “I-PAC2”.

Left Stick / Right Stick vs D-Pad (The Mistake That Took Me Hours)

When I was pressing my keyboard keys on the website, I realised that only the D-pad was being used, and I asked a question that would solve my problem and reward the three to four hours I wasted on my quest to search for a solution.

What if the game was expecting analog instead of D-pad buttons?

You see, analog supports 360° movement, and it’s typically used for the in-game character movement logic, not the main menu logic.

I read the documentation, and I realised that I needed to modify the UP, DOWN, LEFT, and RIGHT to either RUP, RDOWN, RLEFT, and RRIGHT for the right stick analog or LUP, LDOWN, LLEFT, and LRIGHT for the left stick analog.

I removed the UP, DOWN, LEFT, and RIGHT completely because they weren’t doing anything, and I added both the right and left stick analog to my mapping.

After I launched the game, it worked properly; I couldn’t believe it back then. The thing that was remaining to do was remap the keys to my liking by changing the keyboard character keys.

House of Velez Working Configuration

House of Velez uses the left stick analog for the main menu navigation and in-game character movement logic; the working "mapping.ini" config is:

[startup]
enabled = true
[config]
Subtract = disable
Add = enable
Divide = enableToggle
Multiply = exit
pollInterval = 0
[pad1]
R = RUP
F = RDOWN
D = RLEFT
G = RRIGHT
Up = LUP
Down = LDOWN
Left = LLEFT
Right = LRIGHT
LControlKey = A
LMenu = B
LShiftKey = X
W = Y
X = RB
Space = LB
V = RT
C = LT
B = START
N = BACK

[pad2]
R = UP
F = DOWN
D = LEFT
G = RIGHT
S = B
Q = A
I = Y
Z = X
K = RB
A = LB
L = RT
J = LT
D6 = START
D2 = BACK

I'm using both the right and left analog sticks here, and I can also include the D-pad mapping logic if I need to.


r/pcgamingtechsupport • • 2m ago

Display Fullscreen games using gsync with two monitors. The windows on the non-active monitor get their fps cut in half.

1 Upvotes

I play games on one monitor and have stuff going on my TV as a second monitor. They're both 120hz VRR g sync compatible. What I'm noticing is that if I'm playing a game with g-sync on, the TV has the fps drop when its window becomes non-active, which causes lots of stuttering and whatnot when watching streams. I can see this when I run the UFO test too. It cuts from 120hz down to about half. Is there any way to fix this? I've tried using hdmi vs displayport, DSC vs no DSC, no HDR, fullscreen vs. borderless fullscreen vis windowed, fullscreen optimizations, no gpu scheduling, everything I can think of. If i set the game not to use g-sync in the control panel, it's fine.

If I turn off g-sync globally, it's fine. I even tried turning off VRR on my TV, and if i pull up the UFO test on the TV while I launch a game with gsync, it starts chugging. It doesn't appear to be matching the FPS of the primary monitor either, even if the game im playing is running over 120fps, the non-active windows get their FPS cut in half.. If I click back to making the other screen active, the fps shoots up on the ufo test or video im watching, even if the game is still being rendered on the other screen. It's just the act of making it the active window that's the difference. The UFO test has the 120 hz on the top bar, 60 in the middle, 30 at the bottom. When this happens it's almost like each one gets halved almost exactly but not quite.

Conversely, I also notice that when I switch the active window to the non-game monitor, the game FPS I can see in the overlay almost gets cut in half too. I also noticed in the ufotest when it starts happening, it says "waiting for sync" and then eventually "sync failure, close tabs and programs, fps too low." I check the resource monitor and my resources are not maxed out at all. Sometimes I'll boot up CS2 to test....and it holds steady, then if i go into the settings and increase the max fps in CS by just 1, the ufotest goes crazy and starts saying sync issues. Sometimes in some games it seems like the ufotest fps is exactly what the game fps is and changes with it like they're in sync.

edit: just ran another steam game on the other monitor so i could see the fps of the screen while i had another game running on my primary monitor...it stayed steady. this may just be limited to browsers. i tested edge and brave and firefox all the same thing.

Win 11 Pro

9800x3d

rtx3070

32GB ddr5

nvme ssd

monitor 1: msi mpg 321urx with gsync on fullscreen, hdr on, 4k 120hz using hdmi 2.1

monitor 2: samsung qn90b with gsync on fullscreen, hdr on, 4k 120hz using hdmi 2.1


r/pcgamingtechsupport • • 3h ago

Troubleshooting Strix Halo (AI Max+ 395) NPU gets stuck in a hang loop (LiveKernelEvent 141, ipustack.sys) until reboot. 9 times in 6 weeks. I tried everything and it's driving me crazy.

1 Upvotes

Hi all, I've been fighting an NPU problem on my Strix Halo laptop for about 6 weeks and I'm running out of ideas. Everything I've checked and tried is below, plus the troubleshooting form at the end. Any help or pointers would be really appreciated.

System

  • ASUS ProArt PX13, Ryzen AI Max+ 395 / Radeon 8060S (no dGPU), 128 GB (96GB RAM / 32 GB VRAM)
  • Windows 11 26H2 retail, build 26300.10075 (was on Insider until 20 Nov, same problem on both)
  • BIOS HN7306EAC.314 (latest)
  • GPU driver 32.0.32029.2010 (Adrenalin, clean install)
  • NPU driver 32.0.20102.4480 (kipudrv.inf / ipustack.sys, latest I can find)
  • Windows AI runtime: AMD VitisAI EP 1.8.58.0 + Framework 1.8.80.0, WinML AMD NPU EP 2.1000.81.0

The problem

Every few days the NPU starts timing out and never recovers:

  • A live kernel dump in C:\Windows\LiveKernelReports\WATCHDOG every 60-110 seconds, bucket LKD_0x141_Tdr:6_IMAGE_ipustack.sys
  • No BSOD, the PC keeps working, games keep running, but it never stops by itself
  • Only a reboot fixes it, and the restart itself usually hangs, so I end up holding the power button
  • Closing the lid during a storm = laptop never wakes up (forced power-off)
  • Ending a WorkloadsSessionHost.exe during a storm hangs Task Manager
  • Restarting the NPU device (pnputil /restart-device) during a storm froze Windows completely
  • Starting a WPR GPU trace during a storm hangs too

When it happens

  • Usually 25-30 min into Star Citizen (Turbo, 75-85 W). The game itself keeps running fine
  • But also 3 times with NO game running, just desktop use (most recently tonight, 2.5 h after boot)
  • Once it starts, it keeps going long after the game is closed

What I've already ruled out / tried

  • Turned off Click to Do: still happens
  • Left Windows Insider for retail (in-place upgrade): still happens
  • Capped power to 75 W: still happens. Switching to 55 W mid-storm doesn't stop it
  • Temps are fine during storms (CPU & GPU ~75 °C)
  • No WHEA errors at all, CPU-only undervolt (iGPU untouched)
  • Latest BIOS, clean GPU driver install, latest NPU driver (same storms on NPU driver 3930 and 4480)
  • Sent an AMD Bug Report Tool report and a Feedback Hub report

Side note: on Insider, WorkloadsSessionHost.exe (Windows AI) also crashed 30-60 s after almost every boot in onnxruntime_vitisai_ep.dll 1.8.0.87 (0xc0000409 fail-fast). That crash stopped after I moved to retail, but the NPU storms didn't, so I think they're separate issues.

Questions

  1. Anyone else on Strix Halo (Flow Z13, PX13, HP ZBook Ultra G1a, Framework Desktop on Windows, etc.) seeing ipustack.sys 0x141 live dumps? They're silent, check C:\Windows\LiveKernelReports\WATCHDOG or Reliability Monitor.
  2. Is there a newer NPU driver than 32.0.20102.4480, or a known fix/workaround?
  3. Has anyone from AMD acknowledged this?

I'd like to keep the NPU and Windows AI features working, so I'm not looking to disable the NPU. Happy to share dumps or more info. Thanks!

Computer Type: Laptop (ASUS ProArt PX13, HN7306EAC)

GPU: Radeon 8060S integrated (40 CU, 32 GB VRAM carve-out), no dGPU

CPU: Ryzen AI Max+ 395 (Strix Halo), 16 cores / 32 threads, XDNA 2 NPU

Motherboard: ASUS HN7306EAC (laptop)

BIOS Version: HN7306EAC.314 (latest)

RAM: 128 GB LPDDR5X soldered (96 GB system / 32 GB VRAM)

PSU: Stock 200W ASUS charger

Case: N/A (13" laptop). Temps during storms are fine, ~75 °C

Operating System & Version: Windows 11 Pro 26H2, build 26300.10075 (retail; Insider until 20 Nov, same problem on both)

GPU Drivers: AMD Software 26.11.2 (driver 32.0.32029.2010), clean install

NPU Driver: 32.0.20102.4480 (kipudrv.inf / ipustack.sys)

Chipset Drivers: AMD Chipset Software 8.09.28.1124

Background Applications: Discord, G-Helper (instead of Armoury Crate), Edge, Phone Link, TIDAL. Star Citizen when it happens while gaming. Chris Titus WinUtil telemetry tweaks applied.

Description of Original Problem: The NPU gets stuck in a loop of timeouts: LiveKernelEvent 141, bucket LKD_0x141_Tdr:6_IMAGE_ipustack.sys, a live dump every 60-110 s that never stops until a reboot (and the restart itself usually hangs). Usually starts 25-30 min into Star Citizen, but has also happened 3 times on the desktop with no game. Full details in the post above.

Troubleshooting: Click to Do off, left Insider for retail, capped power to 75 W (switching to 55 W mid-storm doesn't stop it), latest BIOS, clean GPU driver install, latest NPU driver (same on NPU driver 3930 and 4480), temps fine, no WHEA errors, CPU-only undervolt (iGPU stock). Sent AMD Bug Report Tool and Feedback Hub reports.


r/pcgamingtechsupport • • 11h ago

Network/Wifi/Internet Extreme rubber banding in Fortnite — every other game works fine, WiFi and ping testing fine in command prompt

1 Upvotes

About 2 days ago I had this issues arise only on Fortnite. In game, I’ll lose the ability to move and then 10 seconds to a minute later I’ll rubber band back to where I was 30 seconds previously. Half the time I’ll just be disconnected from the server. Other games are working just fine and ping/internet speed stay normal when Fortnite lags (tested in command prompt). Even in Fortnite: when the lag spikes happen, I get the red X by the WiFi symbol, but the ping doesn’t rise. Any help would be greatly, greatly appreciated.


r/pcgamingtechsupport • • 11h ago

Troubleshooting LiveKernelEvent 141 PC Crashes when streaming RTX 4070 Ti / MSI B550

1 Upvotes

Hi everyone,

I am getting frustrated and really need help. My best friend helped me build my PC and he knows some stuff (though he's a software engineer the first place), but he is also a bit overwhelemd by now.

I will list all the things we have tried. Since I am an absolute noob, I had to ask AI for a bit help too (I try not to use it, but my friend couldn't help anymore either), but we all know how useless those answers can be.

So my PC randomly crashes (full reboot / BSOD) while gaming + streaming to Twitch, and recording locally in OBS at the same time. Sometimes it runs completely fine for 6 hours straight, other days it crashes after 8 minutes, and after a reboot it might crash again after 4 hours.
First my screens freeze, I can still hear the audio through my headphones, but ntohing reacts. Then it slowly (or sometimes after a while) turns black and my pc goes slower (doesnt turn fully off tho). And then it restarted.

I apologise for summing everysthing up with AI, but I honestly have no fucking idea what I'm doing anymore and couldn't sum it up myself :( I just wanna play my silly rpg games.

Here are all my system specs, error logs, and everything I’ve already checked and tried:

  1. Hardware & Software
  • Motherboard: MSI MPG B550 GAMING EDGE WIFI ATX AM4 Motherboard
  • Graphic Card: MSI SUPRIM X GeForce RTX 4070 Ti 12 GB Video Card
  • CPU: AMD Ryzen 9 5950X 3.4 GHz 16-Core Processor
  • RAM: Corsair Vengeance LPX 32 GB (2 x 16 GB) DDR4-3200 CL16
  • SSD: Acer Predator GM7 1TB M.2 NVMe SSD PCIe 4.0 (NVMe, 74% full, ~255 GB free)
  • OS: Windows 11 (Build 26200)
  1. Error Logs & Symptoms
  • Previous crashes: BSOD 0x00000133 (DPC_WATCHDOG_VIOLATION) – minidump pointed to storport.sys as the culprit.
  • Latest crashes (Windows Reliability Monitor): Multiple entries showing Hardware Error – LiveKernelEvent**, Code:** 141 (GPU driver timeout) along with "Windows was not properly shut down".
  • Additional symptom: After one of the crashes, the red VGA debug LED on my motherboard stayed lit during reboot with no display output until I did a full hard shutdown via the power button. Only happened once tho.
  1. What I Have Already Checked & Tried
  • Temps & Usage Monitored (MSI Center, CrystalDiskInfo, Task Manager):

    • SSD health in CrystalDiskInfo: Good (100%), idling at ~51 °C.
    • CPU under load around ~70 °C, GPU temps look normal (~47–48 °C at idle/menu).
  • Reduced VRAM Usage: On Ultra settings, BG3 was using 11.5 / 12.0 GB VRAM even before starting OBS. Lowered game settings to High, bringing VRAM down to ~8.9 / 12.0 GB. While streaming, I ended up around 10-11, maybe occasionally touching the 12GB. However, it still crashed after ~4 hours of streaming + recording. I checked temperature and the VRAM right before it crashed and it was in a normal range! I had them open all the time for this.
  • BIOS / RAM: Disabled A-XMP in BIOS (running RAM at stock/JEDEC speeds), did not prevent the crash after 4 hours.
  • Windows & Drivers:

    • Ran sfc /scannow (no integrity violations found).
    • Set PCI Express Link State Power Management to Off in Windows Power Options.
    • Updated AMD Chipset drivers for the B550 motherboard.
  • Physical Check: Opened the PC and checked that the GPU and power cables are seated properly. I think they are, but I'm not sure how to check tbh,

Does anyone have any idea why this happens so inconsistently?
I am going insaneeee.


r/pcgamingtechsupport • • 15h ago

Display No display after changing PSU ?

1 Upvotes

Hi. So i jus changed my psu yesterday and after the first biot, i got a vga led. So bc this is quite frequent for me i figured i would unplug/plug back the gpu and it worked, i got a display. This morning i go to turn on my pc and i get the same vga led. After the same trick fails to succeed i start fearing something and i checked everything. All the power cable connections, the gpu socket, the gpu integrity, i installed the old psu back, i checked every possible thing. I even cleaned the gpu contact pins but nothing. The pc turns on and boots normaly, i even hear the windows theme. It’s just that there's nothing comming from the gpu. The gpu itself has it’s fans working.

I can’t understand it please help if you got a clue.

New gpu: p750gm gigabyte

Old gpu: cx600 corsair

Cpu: r5 5600

Gpu: rx 6700 xt xfx quick 319

MB: asus prime b550 plus


r/pcgamingtechsupport • • 17h ago

Troubleshooting Ready Or Not crashing on PC when booted from xbox games

1 Upvotes

so i bought this PC second hand it has 32gb ddr4 ram and an amd raedon rx 6600 xt 8gb GPU, it works great with other games from the XBox games app, but every time i try to run ready or not, it gets to the point where it asks me if i want to allow ready or not to make changes it resets the pc back to the login screen, does anybody have any ideas or solutions that would help me get it running?


r/pcgamingtechsupport • • 18h ago

Compatibility Is her current laptop good enough?

Post image
1 Upvotes

My daughter currently has the HP Victus laptop. We have another 8 gb stick to install into it.

She is saying she wants a new desktop PC, because she wants to play Siege, FNAF, Roblox, and Undertale.

We would rather get her a really nice monitor and keyboard to hook up to the laptop, then spend $$$$ on a new CPU and components right now.

She doesn’t think the Victus’ specs are enough to run those games. I have zero clue when it comes to this stuff. Can anyone help a mom out? Thank you!


r/pcgamingtechsupport • • 18h ago

Network/Wifi/Internet wifi drivers not working after playing game

1 Upvotes

so i was playing rl and after that i need my laptops hotspot but i couldn’t connect it and i found out that there’s some problem

it’s realtek 8922ae wifi 7 pci e nic
showing “this device cannot start (code 10)”

but i restart my laptop it works again normally

what’s the issue? how is it caused and what’s the fix?

i have a 5060 gpu lenovo legion 5i


r/pcgamingtechsupport • • 20h ago

Software Is Windows A Good Enough OS?

1 Upvotes

Getting My First Gaming PC. I’ve read that linux is better, however, it requires tinkering & it still seems less optimal at times. Is windows better for longterm use? I’ll mainly use steam


r/pcgamingtechsupport • • 22h ago

Troubleshooting i cant solve the lag in neverness to everness

1 Upvotes

hey guys let me ask here

i have lag and i want to solve it

what i have tried and done sofar,

Cleaned as much dust as possible from all compnents with a soft brush,

Clean instal of windows, drivers and NTE,

upgraded my gpu in te worst time of the year from sapphire nitro+ 6900xt to sapphire nitro+ 9070xt,

PSU replaced by seasonic with a new unit and a 12v 6x2 cable,

use fan control to optimize the fan curves for a better airflow,

re-flash motherboard bios and run everything default, only thing that is enabled is re-bar, xmp

ran a memtest of 7-8 hours and 6 passes have passed with out errors

https://youtu.be/svTl6yhqrXU a short clip and cpu temp monitor (acording to people the cpu temp is fine for this cpu)

https://youtu.be/E02HpyPiPps a clip when i disable pagefile in windows,

the game run at high in game settings,

also tried pbo manual with auto oc, and some settings,

cpu boost overide 50 positve

active oc tuner: enabled

pbo : advanced

curve opttimizer : per core

all cores negative15 (except core 5) for some reason that stay at 0

but for some reason the cpu lock it self to 3.4gz when i run the game and it boost when i close the game ,

my system spec

CPU : AMD Ryzen 9 5950x

CPU Cooler : be quiet! Dark Rock Pro 4

Motherboard : Gigabyte Aorus Master x570s

Video Card : Sapphire Nitro+ RX 9070XT 16G

Memory : G.Skill 32G (4x8G) (B-Die) (F4-3600C16-8GVK)

Storage : Samsung PM9A1 2TB

Storage : Samsung QVO 870 8TB Sata SSD

Case : Fractal Design Meshify 2 Compact White

Case Fan : Phanteks T30 PWM 120mm x5)

Power Supply : Seasonic Prime PX-1300 Platinum

Monitor : Asus 4K OLED 27" (PQ27UCDM)

if need more details about certain things i havn't show,done tell me i make a clip,


r/pcgamingtechsupport • • 22h ago

Compatibility Controller compatibility in old Lego games

1 Upvotes

Sorry if I used the incorrect tag, I am a dumbass in tears.

I bought Lego Batman the videogame for my boyfriend and I to play on pc, assuming we could play together with one of our dualshock 4 controllers like we have with every other Lego game (Hobbit/LOTR, the Incredibles, Marvel’s Avengers).

We had some issues with stuttering, fixed that with minimal problems, and the controller was working fine alongside the keyboard for like 2 hours. Until it wasn’t working fine.

The controller was connected via USB, we were using the Steam input, and it just stopped working after a crash. The controller still connected to the game, player 2 was active, but none of the inputs worked. No movement, no actions, couldn’t even go the pause menu and drop out.

We tried using ds4windows after disabling Steam input but same issue, connection but no actual input.

The whole ordeal has been incredibly frustrating. We can’t play together. I don’t understand why it stopped working. If you have any ideas, please explain like I’m 5. My tech knowledge starts at Stardew mods and ends at Minecraft mods.


r/pcgamingtechsupport • • 7h ago

Controls/Input This bug has ruined my aiming. Mouse stops registering mouse movement for a second.

0 Upvotes

Thanks for sharing. Tbh I just got a new mouse. My previous mouse was a razer viper ultimate. Same issue. Not just letting go the scroll wheel and the side buttons. They just don't respond for a second or a second and a half. Making feel like my inputs don't respond when I hold down my left click. I now have a onikuma mouse it's exactly the same issue. I have had 3 laptops this bug has followed me like a plague. It happened on all 3.i recently got an Acer 3050ti i5 12th gen. Still having the same issue. I'm at my last straw at this point.

I am trying to game and stream but this bug isn't letting me aim properly I'm go one second the next minute I can't even move my mouse every 5 seconds. It lasts for a second or 2 every 5 to 6 seconds. The mose won't register mouse movement, only clicks or whatever button I was holding down before the bug starts. It happens to all buttons even scroll wheel doesn't register for a second I have to reinput the key.

Sometimes when I switch from dongle to wire it disappears for a few minutes den it returns while I am connected through wire. It's annoying to say the least. I play apex legends where I use scroll up and down to bunny hop by bunny hops are inconsistent because of this bug sometimes my scroll wheel won't register not just mouse movement.