r/reloading • u/lobby073 • 16h ago
Newbie Is a 50 grain copper bullet a good choice for hunting using an AR?
For an AR 223.
I’m primarily targeting small hogs for meat.
Yes, I have a 308, but I’d rather use the AR
r/reloading • u/lobby073 • 16h ago
For an AR 223.
I’m primarily targeting small hogs for meat.
Yes, I have a 308, but I’d rather use the AR
r/reloading • u/Gunlover91 • 8h ago
Im getting ~3100 fps out of 26gr of tac with a 64gr tbbc (im pushing the limit i know) I was wondering what should I expect with a 11.5in barrel? I just got this upper yesterday im making some loads up for it right now just wondering what to expect vs 20in barrel.
r/reloading • u/Agrelaloth • 3h ago
Hello I recently got into annealing. Just want to hear your advice/ opinion if it good or what to improve
r/reloading • u/mehrjake13 • 12h ago
I fell victim to NAS3 300blk case I must of picked up at the range... How the hell do I get this out lol
r/reloading • u/CBM64_SYS64738 • 7h ago
I’m an absolute idiot, and I’m posting this as a PSA about complacency and hubris in the hope others might learn from my idiocy.
After 36 years of reloading I finally managed to do what we all know not to do from day one, and that is accidentally cross-contaminate reloading powder. The result of my stupidity were .223 rifle rounds loaded with rifle powder contaminated with enough pistol powder to cause catastrophic failure (pics attached).
I disassembled the remaining ammo batch, and after weighing each load and pouring the powder into ice-cube trays, I see I’ve got significant traces of pistol HS-6 powder within the intended Winchester 748 rifle loads.
In the picture, you can see this in highlighted tray-slot #7 (HS-6 has larger and more silvery flakes than W748).
Looking at my reloading log book, I’m thinking what I did was not properly clear out the powder hopper when switching from reloading pistol rounds to rifle. Once again, completely my fault.
Now we know the cause, what were the results of this dumb-assery? I was on the bench sighting in the scope on my competition AR; a RightToBear Builder’s Grade 16” mid-length upper on a DSA lower. About 15 rounds of slow-fire into the session, a monumental “boom” instead of the expected “bang” occurs. I’m not hurt at all, but the magazine base is blown out and the upper receiver and bolt are ruptured. Looking at the bolt, it’s absolutely split and peeling like a banana. The results are the rifle in the top of one of the photos.
Now, here is where my damn hubris bites me even more in the butt. You might think I’d tell myself “Huh - there must be something wrong with my ammo, so I’d better stop shooting!” but you would be wrong.
With a series of competition events looming and dwindling time to sight in, I stupidly tell myself “The fault can only be with the rifle, and not my precision-loaded, boutique custom reloads!”. With this sense of self-righteousness I pull out my second AR and start sighting that in for use in the competitions using the same batch of reloads.
Another ten rounds in, and “Boom” - the exact same thing happens to my Bushmaster. The Bushmaster did not hold up quite as well as the RightToBear; the photo (rifle on the bottom) shows a lot more destruction to the upper and bolt.
Once again, I incredibly escaped any injury.
In hindsight, although I blew out two uppers I consider myself lucky in that I was able to identify the problem and implement a solution without injuring myself or anyone else.
Interestingly, while I was sure there would be no warranty available due to the use of wildly inappropriate reloaded ammo, I reached out to the customer service team at RightToBear and explained my Tomfoolery. They (rightly) confirmed the warranty could not cover that damage, but incredibly they gave me store credit of a sum way higher than I could ever have expected or deserved. They seemed genuinely glad I was OK, and were very generous despite me completely causing the issue. I’ve since bought a replacement Builder’s Grade upper and already have it configured on the same DSA lower (both lowers seem untouched and work fine). A big kudos to the RightToBear customer service team!
So, lessons learned:
Thanks for tolerating my ramblings and stupidity; maybe this might help someone.
Cheers!
r/reloading • u/OneAir6805 • 11h ago
I bought a box of ADG brass in .308. Also copped a new Matchmaster seating and full-length sizing dies from Rcbs. I ran the full box of cases through the sizing die and I saw that it left all these vertical marks inside and outside the case neck. What did I do wrong?
r/reloading • u/Random-American- • 15h ago
r/reloading • u/there_is-no-spoon • 14h ago
I've loaded several different bullets in 7.62x39 with A1680 and it has been the best for hitting factory plus feet per second speeds.
I've loaded 27.3 grains of 1680 under hornady sst 123 grain bullets hitting 2,471.1 fps. With a magnum large rifle primer.
The factory hornady black sst 123gr 7.62x39 was 2,267.3 fps out of the same AK.
So I'm getting ready to work up these gold dots and the data from speer looks kinda crazy to me of 28.2 grains of A1680 to hit 2,455 fps max. (Second picture)
I'm hesitant to work up to that charge. Obviously I'll start lower but wondering if anyone has experience loading this combo? I know the sst bullets are longer and sit deeper in the case causing more pressure but the 28.2 max charge for the GD still seems high.
Would you shoot for the 2,400 fps range for these bullets? I was a little surprised the hornady factory ammo was only 2,200 fps. I know these are different bullets but they are what I am working with right now. Looking for the best hunting load.
Do you use magnum large rifle primers when using spherical powder or not necessarily? I use the magnum with ball powders generally but regular large rifle primers with extruded powders.
r/reloading • u/ElkShot5082 • 3h ago
Prussian capture chassepot in 11x60mmR
Using 350gr .458” projectiles sized down to .447” (over several steps!).
14.5gr trail boss gives 1100fps, very accurate for what it is imo, mild report, minimal recoil.
17gr trail boss gives 1230fps, seemed a little less accurate but still good, recoil became a bit sharp even with just the modest increase in velocity.
r/reloading • u/Background_Award3669 • 7h ago
Just did my first 50 rounds of 308 with HD 168gr BTHP and used varget and it’s a little late at this point and I was measuring my col and had some variation
I needed 2.810” but I’m over and under on some by 1 thousands is there some grace I was trying to make some match grade loads but first time loading
r/reloading • u/ddubs777 • 15h ago
I have reloaded factory Hornady 6ARC brass 9 times now without annealing. I haven’t seen any cracks but I am wondering when I should just throw it out and start on my bag of starline brass? What are typical failure modes? Is it safe to shoot until I see a failure? These are shot out of a bolt gun btw. Thanks
r/reloading • u/Other-Scene-2747 • 15h ago
I honestly didn't think I was applying that much force; I kind of automatically assumed it was the boxer-primed Austrian surplus Canada had gotten a ton of a few years ago and wasn't paying attention that it was Brendan.
I am just glad this is a $15 mistake that local shops can fix with replacement rod for my die.
r/reloading • u/texpiff60 • 15h ago
Cranking out subsonic 9's with my Lee Six Pack progressive. Using 3.4 grns of titegroup to push 147 gr FMJRN at 1.145 OAL for range fun.
I consider myself a newbie as Im in my 4th year of reloading.