r/sharpening • • 17m ago

Question Choil opinion

Post image
1 Upvotes

What do you guys think about my choil knife ?


r/sharpening • • 1h ago

Restoring VG10 Damascus finish question

1 Upvotes

Hi all,

I scratched my Shiro Kamo VG10 Damascus when sharpening and couldn't really find info on how to restore the finished again.

Complete amateur playing around in the kitchen, is there an amateur friendly way or should I just accept it?

Thanks!


r/sharpening • • 1h ago

Question Resin bonded vs. Vitrified

2 Upvotes

Is the price difference of the vitrified worth it over a resin bonded stone?

I’m not a professional sharpener and only work on the few pocket knives that I have.


r/sharpening • • 2h ago

How do you tell a stone cutting speed

1 Upvotes

My metric for determining a whetstone stone cutting speed is, though, slurry color and feel, such as a darker slurry with a rougher feel during sharpening, which means a stone cuts faster. So I would like to know what other things need to be considered for determining a whetstone cutting speed and if my method is accurate.


r/sharpening • • 6h ago

Reminder: don’t let an amateur take a belt grinder to your knife

Post image
75 Upvotes

Had someone bring me a full block set of knives to sharpen after just getting them sharpened by someone else. I’m amazed at the incompetence. They took a good 1/8” of material off.


r/sharpening • • 6h ago

Thoughts on Naniwa Chocera 2k

3 Upvotes

Hi everyone,

I don't see this stone often displayed and this was the last one from Naniwa I got. I had the classic kit (400/1000/3000) for a while. The 400 is pretty nice even tho way less agressive than what I expected coming from Shapton Pro. I really don't jive with the 1k because I feel the feedback is bad and I don't really like the finish. The 3k is a joy to use, silky, fast, clean result it's been my favorite by far.

Thing is, since Naniwa is known to have stated grit below what it is actually (even if this doesn't make sense cause there is no universal grit scale), I felt like 3k could be overkill sometimes.

That's when I decided well I don't see anyone talking about the 2k why not uh ?

Recently it's been my go to stone cause it's a great middle ground. Quick touchs up to keep a nice edge yet bitey. It's very fast, the feedback is good and it gets you to hair whittling sharp in no time. It's almost quite annoying since I like to use my other stones.

Anyways what's your thoughts on it ? Do you guys use it and did it find its place in the line up ?

Cheers !


r/sharpening • • 11h ago

Question TSProf K2 vs. K3 vs. K4

6 Upvotes

Does anyone have experience with the TSProf K2/3/4 systems, and has input regarding which sharpener is the most for the money?

I am also looking at Hapstone and KME, but love the simplicity and ease of use TSProf systems seem to have.

It’s hard to tell what will serve me best with 3-4” folders, 4-5” balisong blades, and 5-12” kitchen blades. I would like to be able to sharpen shears, but understand a grinder, or sharpening wheel, may be optimal at that point.

If you have any feedback at all, I am just trying to prepare for Black Friday. Any input is appreciated.


r/sharpening • • 11h ago

Question Local Asian market has these, are they any good?

Post image
3 Upvotes

They're pretty cheap so I'd guess it's like mid-low quality, but idk! Anyone have experience with this brand?


r/sharpening • • 16h ago

Metal stuff on my stones.

Thumbnail
gallery
21 Upvotes

Hi guys.

After a few dozen sharpenings, my Stones have some residue/ some leftovers i cant remove by hand.

What do i do with it? A flattening tool? Rub another stone on it?

I have a sharpal 162n also. Can that be useful?

Thanks.


r/sharpening • • 20h ago

NZSkip navigationCreateAvatar image ALLHONE 14 degree angle guide replaceable diamond sharpener. Shave under a minute. Read below

Thumbnail
youtube.com
0 Upvotes

10 degree handle angle guide plus SKONER and Mercator 4 degree blade tapers are a 14 degree edge per side. 240 grit and 4000 grit diamond film on a resilient base for a slight convex for edge stability. Generally most knives with higher carbon are about 4 degree taper. Trade knives with lower carbon are about 2 degrees. Old timers end up at a low angle for extended edge retention and extra cutting speed. I have no idea why some angle guides are at horrendous 20 degree edges plus taper. Perhaps they watch the bush crafters etc videos and believe knife blades are like axes. 17 is a general purpose. Neck Sheaths for SKONER MERCATOR also discussed #knifecommunity #knifeskills #knifesharpening #huntingnz #hunting


r/sharpening • • 1d ago

Mikawa Toishi

Thumbnail
gallery
6 Upvotes

Mikawa Toishi (三河砥石)

  • Origin: Mikawa region, Aichi Prefecture, Japan
  • Type: Nakato (medium stone)
  • Grit: approx. #3000–4000
  • Hardness: 3.0–3.5 (on a 1–5 scale)

r/sharpening • • 1d ago

Question Belt sander direction

4 Upvotes

Should I have the belt running up or down when grinding the bevel?
My dad says down but with the edge facing up so you can see when you reach your center mark but I’m concerned that the belt will be cut of instantly.
I say that the belt should be moving up so it can’t grab the knife and also have the edge up for the same reason.
What does this community think?


r/sharpening • • 1d ago

Question Have never sharpened before, what should I use for these tools?

Thumbnail
gallery
16 Upvotes

I’ve recently gotten into woodcarving, and by now my most used tools have gone quite dull, so I figured it’s time to figure out how to best take care of them. I tried using the little sharpening stone that came with the chisels shown on the third picture, but it’s no good. I definitely have bad technique, but it’s also too small to use on anything other than the chisels and I suspect it’s too coarse to have as the only stage (guesstimating about 250 grit, as it doesn’t say on the box)
Perhaps multiple things are necessary since this is a somewhat diverse spread, but I’d prefer having one coarse and one fine tool, plus maybe a strop, that works for everything (possibly even kitchen knives in a perfect world).
Feel free to suggest something in any price range, I want to get a feeling for what’s cheap and expensive. Ask questions if you want some kind of specifications and I’ll answer best I can :)


r/sharpening • • 1d ago

Axesharpening tips?

7 Upvotes

Hey guys, I'm hiding in my shed from a storm, and I have gotten so bored that I decided it's time to make my axe sharper enough to slice paper. Any tips on how to do it? I don't have any specialised sharpening tools, just general shed stuff


r/sharpening • • 1d ago

In search of 1x30 belt sander

4 Upvotes

Anyone have ideas on where I can find a used Bucktool Low Speed, a Rikon Variable speed, or Kfmk 1x30 belt sander?

I just want it for personal use and would like to find a good deal.

edit: or Vevor


r/sharpening • • 1d ago

Veff style serrations

Thumbnail
gallery
12 Upvotes

Hi there

I found out recently that the us patent for the veff serrations expired a few years ago. Not that it affects me much, not being in the US and not planning to do it commercially, but it inspired me to try to recreate them.

I owned a CRKT knife with these serrations before, so i had a general idea of how they cut and look like. The inventor reportedly makes them by hand, tho some patterns can be spotted. After analysing the patent drawings, knife photos and some messing around in fusion360 i eastimated that the following setup will give serrations close enough: around 1/2 inch diameter round sharpening rod/dremel grinding stone, 15 degrees downwards from the secondary bevel and 47 degrees CCW. Teeths' tips will be spaced roughly 8.5mm apart.

Above i attach my first attempts at actually creating these serrations. These knives surely dont look perfect, as i choose to practice on ones that i dont worry about damaging. I must say, this geometry is really good. Even straight from a coarse grit they cut well. I'm planning to practice that as i want to customize my leatherman blade and i need to have it perfected by then. I'll share further insights and maybe a 3d model of a jig I will to model.

Has anyone gere tried to make such serrations as well? Please share your insights


r/sharpening • • 1d ago

Can magnamax split atoms?

226 Upvotes

Hapstone RS with hapstone premium cbn stones @ 16°. Grits: 150, 400, 800, 2000, 5000. Stropped with 9, 6, 4 and 1 micron Stroppy Stuff.


r/sharpening • • 1d ago

Question Very first sharpening experience

Post image
15 Upvotes

Found my great grandpas knife and it’s fucked up I want to give it to my uncle for Christmas so I thought I’d give it a shot sharpening/cleaning it the opinel is just mine but I bought a gerber edge field knife sharpener and I feel like I’m fucking these up so any tips would help.

Edit: wow thank you all for this helpful information this is probably the most helpful subreddit I’ve seen


r/sharpening • • 1d ago

Question Hogue otf angle change.

Thumbnail
gallery
18 Upvotes

I’m changing the edge on my Hogue OTF because I was unhappy with the edge on it from the factory. I am brining it down to 15 degrees per side and I am going to go to 800 grit because I’ve heard mangancut likes a toothy edge.

I’m having an issue where I can seem to reprofile the edge but I’m not actually hitting the apex. If you look along the apex there is still visible sharpie showing the edge of the knife isn’t being hit. This is the first time I’ve had this happen. Does anyone have any advice?


r/sharpening • • 1d ago

I suck at this.

7 Upvotes

Started getting into sharpening and it feels like I'm doing something wrong. I got a smiths tristone from Walmart. I have a crkt spew and the factory grind on it was for lack of terminology was off. I'm trying to put a pretty low angle on it and it feels like I've just been making the thing duller. It can still cut paper but not as well as before. Idk what I'm doing wrong.


r/sharpening • • 1d ago

Will this work on basswood?

Post image
5 Upvotes

Currently low on budget and had to order this paste from AliExpress. Had StroppyStuff before and will buy again with my next salary.


r/sharpening • • 1d ago

How would you approach fixing these?

Post image
24 Upvotes

Typically I sharpen and repair chips, but haven't had to straighten out a recurved edge yet. What's the best way to approach this while retaining the most amount of material?


r/sharpening • • 1d ago

Question Is TSPROF usually slow at shipping items?

4 Upvotes

Placed an order for a K03 with some accessories (all are in stock and ready to ship) over a week ago from TSPROF US. They've only shipped the free base sticker and fillet clamps so far. Ive emailed them and they said they're still processing the order. Do they usually take this long?


r/sharpening • • 1d ago

Question Problem with new Sharpal 202H

5 Upvotes

 I received my Sharpal 202H yesterday.  I put it together this morning, but I am troubled by how difficult - I mean really difficult - it is to insert the Sharpening Guide Rod into the hole at the end of the abrasive plate holders.  I have tried inserting into each one of the abrasive plate holders and the difficulty is consistent throughout.

Is this normal?  Should I be lubricating the end of the Sharpening  Guide Rod before inserting it into the abrasive plate holder?

Also, after assembling the unit, I have two black bolts and one of  those tiny metal knurled knobs - like the one that fits into the collar that limits the travel of the Sharpening Guide Rod.

Otherwise, looking good!!