r/sharpening • • 5h ago

Reminder: don’t let an amateur take a belt grinder to your knife

Post image
64 Upvotes

Had someone bring me a full block set of knives to sharpen after just getting them sharpened by someone else. I’m amazed at the incompetence. They took a good 1/8” of material off.


r/sharpening • • 15h ago

Metal stuff on my stones.

Thumbnail
gallery
21 Upvotes

Hi guys.

After a few dozen sharpenings, my Stones have some residue/ some leftovers i cant remove by hand.

What do i do with it? A flattening tool? Rub another stone on it?

I have a sharpal 162n also. Can that be useful?

Thanks.


r/sharpening • • 23h ago

Question Have never sharpened before, what should I use for these tools?

Thumbnail
gallery
16 Upvotes

I’ve recently gotten into woodcarving, and by now my most used tools have gone quite dull, so I figured it’s time to figure out how to best take care of them. I tried using the little sharpening stone that came with the chisels shown on the third picture, but it’s no good. I definitely have bad technique, but it’s also too small to use on anything other than the chisels and I suspect it’s too coarse to have as the only stage (guesstimating about 250 grit, as it doesn’t say on the box)
Perhaps multiple things are necessary since this is a somewhat diverse spread, but I’d prefer having one coarse and one fine tool, plus maybe a strop, that works for everything (possibly even kitchen knives in a perfect world).
Feel free to suggest something in any price range, I want to get a feeling for what’s cheap and expensive. Ask questions if you want some kind of specifications and I’ll answer best I can :)


r/sharpening • • 9h ago

Question TSProf K2 vs. K3 vs. K4

6 Upvotes

Does anyone have experience with the TSProf K2/3/4 systems, and has input regarding which sharpener is the most for the money?

I am also looking at Hapstone and KME, but love the simplicity and ease of use TSProf systems seem to have.

It’s hard to tell what will serve me best with 3-4” folders, 4-5” balisong blades, and 5-12” kitchen blades. I would like to be able to sharpen shears, but understand a grinder, or sharpening wheel, may be optimal at that point.

If you have any feedback at all, I am just trying to prepare for Black Friday. Any input is appreciated.


r/sharpening • • 22h ago

Mikawa Toishi

Thumbnail
gallery
6 Upvotes

Mikawa Toishi (三河砥石)

  • Origin: Mikawa region, Aichi Prefecture, Japan
  • Type: Nakato (medium stone)
  • Grit: approx. #3000–4000
  • Hardness: 3.0–3.5 (on a 1–5 scale)

r/sharpening • • 23h ago

Question Belt sander direction

4 Upvotes

Should I have the belt running up or down when grinding the bevel?
My dad says down but with the edge facing up so you can see when you reach your center mark but I’m concerned that the belt will be cut of instantly.
I say that the belt should be moving up so it can’t grab the knife and also have the edge up for the same reason.
What does this community think?


r/sharpening • • 5h ago

Thoughts on Naniwa Chocera 2k

3 Upvotes

Hi everyone,

I don't see this stone often displayed and this was the last one from Naniwa I got. I had the classic kit (400/1000/3000) for a while. The 400 is pretty nice even tho way less agressive than what I expected coming from Shapton Pro. I really don't jive with the 1k because I feel the feedback is bad and I don't really like the finish. The 3k is a joy to use, silky, fast, clean result it's been my favorite by far.

Thing is, since Naniwa is known to have stated grit below what it is actually (even if this doesn't make sense cause there is no universal grit scale), I felt like 3k could be overkill sometimes.

That's when I decided well I don't see anyone talking about the 2k why not uh ?

Recently it's been my go to stone cause it's a great middle ground. Quick touchs up to keep a nice edge yet bitey. It's very fast, the feedback is good and it gets you to hair whittling sharp in no time. It's almost quite annoying since I like to use my other stones.

Anyways what's your thoughts on it ? Do you guys use it and did it find its place in the line up ?

Cheers !


r/sharpening • • 10h ago

Question Local Asian market has these, are they any good?

Post image
3 Upvotes

They're pretty cheap so I'd guess it's like mid-low quality, but idk! Anyone have experience with this brand?


r/sharpening • • 1h ago

How do you tell a stone cutting speed

1 Upvotes

My metric for determining a whetstone stone cutting speed is, though, slurry color and feel, such as a darker slurry with a rougher feel during sharpening, which means a stone cuts faster. So I would like to know what other things need to be considered for determining a whetstone cutting speed and if my method is accurate.