r/toolporn • • Jun 06 '23

Don't Let Reddit Kill 3rd Party Apps!

Thumbnail self.save3rdpartyapps
170 Upvotes

r/toolporn • • 1d ago

Tiny collection of Ti Bit drivers

Post image
62 Upvotes

r/toolporn • • 1d ago

New to me Delta 46-765X 16" Wood Lathe

Post image
54 Upvotes

A bit limp toolpron as this is a used piece of equipment, but I did get an amazing deal from a government surplus auction that had a school district owned Delta 1642 lathe. Yes its older but I got lucky, and once I got it rehomed, and power run to it, I think I scored. Its got no measurable run-out, wobble, grinding, or noise running up through full speed. Bed checks out in great condition, no pitting, rust, or warp. Belt needed to be replaced, but that was it. not too bad for a winning bid of $300.

Plus its got a 2 HP motor, not the 1 1/2 some have.

It did take me quite a while to get a dedicated 250v 15A circuit and plug installed (but that is a story in and of itself in my shop).

some additional photos https://flic.kr/s/aHBqjDb7qS and a very weird chisel I bought off a Craigslist sale that uses 1/4" shaft router bits as replaceable ends. Not sure I have the courage to use it, so it will likely say a wall hanger oddity.


r/toolporn • • 2d ago

Quinn 428 Piece Master Technician Set Organization

Post image
54 Upvotes

I went through my original trays and redesigned them, I’m quite happy with how they turned out!


r/toolporn • • 4d ago

EDC toolkit for maintenance

Post image
122 Upvotes

left to right :

Parkside cutter , Knipex Cobra, SwissTool flat 1 & 2 and Philips 1 & 2 , Bahco phase tester, Stanley pocket driver, set of lockpicks, Wera Tool-check Plus, Knipex Twinkey with 405 & 505 keys, 3D printer blade cutter, large pencil bag, Decathlon rechargable heaflight.


r/toolporn • • 4d ago

NOS BAHCO Made in Sweden adjustable wrench. Doesn't get better than this!

Post image
94 Upvotes

r/toolporn • • 5d ago

Alligator Forceps... handy thing to have! [OC]

Post image
149 Upvotes

Click to enlarge:

Had this for several years... found it on eBay called an ‘Alligator Forceps’. IIRC they could be had in various sizes... this was the smallest.

Took the above photo yesterday for an r/Tools thread; thought I’d share.

#2 Phillips bit for scale.


r/toolporn • • 3d ago

tools

Post image
0 Upvotes

matco tools that are worth every penny?


r/toolporn • • 7d ago

Custom Hand Tools

Post image
270 Upvotes

As a maker and user of a lot of hand tools and machines for automotive, fabrication, wood work, renovations and anything in between - I have an appreciation for good, quality and unique tools.

I’m looking at picking up a Kinetic Raptor soon, which got me thinking. What special or custom tools are there out there which I might not know about??

Anything of interest I’d love to hear it!


r/toolporn • • 7d ago

USM filled with Wera and Knipex

Post image
57 Upvotes

No comment!


r/toolporn • • 7d ago

Mechanically Stripped Steel Rule Rotary Cutting Die used to cut corrugated paper

Post image
22 Upvotes

r/toolporn • • 7d ago

Latest addition to my custom engraved Knipex collection!

Post image
98 Upvotes

Really happy with how this turned out!

If anyone wants to take a closer look at this pliers wrench XS: https://avisual3d.etsy.com?section_id=60405048


r/toolporn • • 8d ago

Pliers!

Post image
82 Upvotes

r/toolporn • • 8d ago

NTD - Shiny new Tekton 8 oz HDB30008 Dead Blow Hammer [OC]

Post image
26 Upvotes

Click image to enlarge.

99% sure it’s OEM is ‘Trusty Cook’.

Just the thing for gently ‘nudging’ things about.

Rule is a Starrett C 604 RE... complete with non glare satin chrome & handy end graduations

No affiliation.


r/toolporn • • 8d ago

Icon magnetic pad use

Post image
19 Upvotes

I’ve found my wrench drawer tossed by rolling my cart too many times, all fixed by an amazing icon product!


r/toolporn • • 10d ago

What can you not live without?

Post image
56 Upvotes

What’s missing from my pliers drawer or what would you replace?


r/toolporn • • 11d ago

Latest gift to me!

Post image
54 Upvotes

r/toolporn • • 14d ago

Snap-On TLLF72 mod

Post image
41 Upvotes

I was able to remove the center insert from this handle with pliers and then lightly hammered the ratchet into place. It feels much better in the hand now


r/toolporn • • 15d ago

Wrench drawer looking a lil full 😉

Post image
88 Upvotes

r/toolporn • • 15d ago

The reverse of porn? Eh it works

Post image
38 Upvotes

Put it together while working on my guitar. had to widen a hole in a cavity at almost 90°


r/toolporn • • 16d ago

I wish they still made these.

Post image
150 Upvotes

E-torx ratchet wrenches. I did a brief spell at Mercedes-Benz dealership and I was tasked with doing a water-cooled alternator on a CLK. One of the techs laughed saying hope you're feeling brave as there's no room to get a socket on them.

I remembered seeing these in the glass cabinet at Halfords. So nipped in on my tea break and bought the last set they had since they were discontinued. When I broke them out after lunch the guys face dropped saying he had never knew they were even a thing and he was off to get himself a set. Drop even further when I said it was the last set.

Made that alternator job so much easier. I've been scared to use them lately just incase one of them brakes. All Halfords can replace it with now is the standard E-torx wrench. I know US PRO make a set but they won't be the same.


r/toolporn • • 18d ago Bravo

My impact socket drawer

Post image
1.4k Upvotes

r/toolporn • • 19d ago

​Title: StealthMounts Bit Holder for DeWalt ​At ..... "$45.00!"

Post image
17 Upvotes

It’s maybe 5 cents worth of plastic and a couple bucks in magnets. On top of that, it doesn't fit right, dont look right and the provided screw is way too long, blocking the battery pack and flops around. Pure trash—needs a normal 8 year old to redesigned, because its pretty good, convenient concept, especially if you're working, say, with a set different fashioners or bits and you don't know exactly Which one you're gonna need? And you got a shimmy, underneath something for 10 feet with enough room to maybe squeeze in. If you suck in your gut and hope something doesn't shift you finally can reach the bit, and its to small.... this would be cool if it didnt just spin around dumping and losing Any bits you put there....


r/toolporn • • 20d ago

Finished restoring my 1932ish Delta 970 (Triple Duty) drill press

Post image
585 Upvotes