r/turning • • 1m ago

Favorite Skew Chisel Videos?

1 Upvotes

I’m running a lean and turn session at my turning club. Prior to the session, I want to share some videos with students.

What are your favorite skew teaching videos? (There are dozens and dozens on YouTube but I haven’t watched them all but some have to be better than others)

Tell me the ones you’ve watched more than once. Which ones do you share or tell your Woodturner friends about….

Thanks!


r/turning • • 1h ago

Facebook Three pointed bowl

Thumbnail
gallery
12 Upvotes

A little nerve racking but I think this 3” bowl turned out pretty good.


r/turning • • 5h ago

Large Silver Maple Crotch Blank

Thumbnail
gallery
3 Upvotes

Finally got the right blank to max out my Rikon 70-3040. 31” diameter and about 11” deep. The 16” core I took out of the middle looks tiny. Going straight to finish on this half of the blank. I think I’ll twice turn the other half of this chunk.


r/turning • • 8h ago

Do I want a stand, a cabinet or a tool chest?

3 Upvotes

Hi all:

I've used lathes before but never really paid attention to what they were setup on... strangely. I've now just acquired my first lathe and am wondering where it should get set in the workshop? I was thinking about something like this:

  1. https://www.harborfreight.com/46-in-9-drawer-mobile-storage-cabinet-with-wood-top-red-57805.html
  2. https://www.harborfreight.com/46-in-1-drawer-mobile-workbench-with-wood-top-black-64012.html
  3. https://www.rockler.com/rockler-mini-midi-lathe-stand

But I'm genuinely not sure which would actually work out the best? Obviously having more tool storage never hurts, but will it get in my way? Be too high? (I'm 6')


r/turning • • 9h ago

I wouldn't have thought of using a plane with my lathe.

53 Upvotes

Found this one on FB. I wouldn't have thought of using a plane with my lathe but it's an interesting concept. Would certainly work. Kind of crazy.


r/turning • • 9h ago

What am I doing wrong?

Thumbnail
gallery
103 Upvotes

I've tried vending at 4 different events. I broke even at the 3rd event, lost money at the others. I started prices higher than I thought I could get for them, then lowered them 10%-15% at each one, I was losing money with each sale by the last one after accounting for consumables and working for free. Had pretty decent foot traffic. I got nothing but positive feedback on the pieces, so I don't think it's a quality issue. Is there something horribly wrong with the display I'm missing? I didn't expect to make bank, I know the economy is rough for most people right now but not even covering booth fees at 75% of the events is a pattern.

The last 3 pictures were at home staging before I put price tags on.


r/turning • • 16h ago

Turnt my first mallet

Thumbnail
gallery
63 Upvotes

Hello /r/turning. I’m not new to woodworking, but new to turning. I got my first lathe about a week ago and this is the first thing I made that I’m proud of. I had one last off cut of a piece of spalted wormy maple left over after I made my leg vise chop out of the rest for my roubo workbench. I know this probably isn’t the best wood choice for a carver’s mallet, but I don’t have too many pieces of 2.5”+ thick wood in the shop yet. I got the Bauer 14x20 and it’s been pretty awesome for a first lathe. I’ve been watching a lot of YouTube videos and I’ve been having a blast so far. Thanks for looking.


r/turning • • 16h ago

Salvaged

Thumbnail
gallery
44 Upvotes

Today’s pointed bowl using a 10cm cube of ash failed repeatedly, but I was able to scrape this little orb thing out of the surviving part. First time trying an ebonized finish as well, mostly because I really wanted to burn it anyway. Still better than a day at work.


r/turning • • 18h ago

Snowman ornament

Post image
13 Upvotes

Stained and painted


r/turning • • 21h ago

newbie My tail stock is shot

Post image
0 Upvotes

My tail stock is shot. It will not advance at all.
I’m fairly mechanically inclined, so I want to take a crack at fixing it

Anyone have any 3-D print files or no of any tools that I can 3-D print new handles with?


r/turning • • 21h ago

Tailstock question

2 Upvotes

My tailstocks internal screw has had its thread stripped by the stop washer (idk if it has a real name) at the back meaning it no longer tightens down fully anymore, if there a fix or would i have to replace it?

I tried adding more snap rings but they just slip too


r/turning • • 22h ago

Places to test drive lathes?

3 Upvotes

Any places in Southeastern PA or South Jersey with a variety of lathes to "test drive"? I'm upgrading my current lathe and am torn between Laguna, Powermatic, Nova and Rikon. I have a Rockler nearby, but they don't stock all of them, nor do they let you use them on the floor for obvious reasons.

FWIW, I'd like a 1.5hp motor, 14+ inch swing, 24(ish) inches between centers. Variable speed is important with low end speed of 100rpm or so. The Nova has a big advantage being beltless, but it's a proprietary motor which is a little worrisome (given their recent financial issues).


r/turning • • 1d ago

Spindle pieces, still on the blank vs hand polished. One-person shop, native hardwoods from Misiones.

Post image
39 Upvotes

Turning a 34-piece set in my one-person shop in Misiones, Argentina.

Photo shows the same profile at two stages: still on the blank after turning on a CNC lathe I program myself, and after hand finishing.

Hand work after turning: sanding 280 to 800 on the lathe, wood shaving polish, bench polisher, 2 coats wax. Then weights, felt, final polish by hand.

Both light and dark are native Misiones hardwoods, no ebony / no rosewood.

The hardest part to get clean is the transition from the stem to the base without leaving a ridge. I sand off the lathe for the last passes to avoid rounding the details.

For hand turners: do you sand on the lathe or off for the final passes on spindle work? I keep going back and forth.


r/turning • • 1d ago

Jarrah bowl.

Post image
42 Upvotes

Today's effort.


r/turning • • 1d ago

New to turning and got these tools for cheap, what are they all?

Thumbnail
gallery
32 Upvotes

a few of them look like they're made out of old files, are they safe to use or is file steel too brittle for turning?

Also, do people collect old turning tools in the same way they do hand planes and chisels? I bought these to use, but if some collector wants to pay to hang them on a wall I wont say no


r/turning • • 1d ago

Beginner turner

4 Upvotes

First time turning just picked up a Grizzly G1495 lathe. Is there anything I need to look out for with this machine. Doesn’t have a chuck what would be a good one to start start with on a budget so take that into consideration. Thank you.


r/turning • • 1d ago

Oak end grain forms

Thumbnail
gallery
105 Upvotes

Shaped with reinforced spindle gouges from Wiedeman, hollowed with Hope Carbide Mini Tools.
Finish : shellac + Cut'n'Polish + Microcristaline Wax


r/turning • • 1d ago

newbie Tool rest broke

Post image
14 Upvotes

Having problems finding a replacement since the shaft is odd size (about 1/64 or 1/32 smaller than 1/2). Should I repair it somehow or find a new one?


r/turning • • 1d ago

What’s on YOUR lathe?

Thumbnail
gallery
56 Upvotes

I’ve got a bit of cherry that’s been kicking around my workshop for a while


r/turning • • 1d ago

newbie Trompo I made

Post image
17 Upvotes

3rd project on my lathe


r/turning • • 1d ago

1" tool rests

Post image
8 Upvotes

So I just picked up a jet 1840 and I am in love with it! It came with the 14-in tool rest which is quite large so I'm looking at options for some smaller tool rests. Been researching quite a bit and looks like robust would be my choice but they're spendy. Anyone try these? Looks like they are modular meaning they unscrew from the post which I have no interest in doing. Depending on the material I might just weld them together. But do these glide smooth? They are less than 1/3 the price of the robust. https://a.co/d/01CeUkV0


r/turning • • 1d ago

My 3d printed project lathe

Post image
0 Upvotes

I recently took on the project of making my own lathe, dont get me wrong, it works and its sturdy and full of concrete, im currently having a problem with trying to round a square stock, its taking me a long time yo even reach the stage in the pic, it feels like im doing something wrong, i tried adjusting the graver angle and nothing is working its all the same, i barely did enough to turn one side round enough to put into the collet, its spinning straight and spinning fast, i just feel like the gravers arent doing anything, the graver is a 5x5mm hss blank that i ground down to a pointy tip

Can anyone help?


r/turning • • 2d ago

What do I do with this beautiful piece of wood?

Thumbnail
gallery
28 Upvotes

Bought this piece of punky wood in the scrap been. Stabilized it with cactus juice and a touch of the golden dye. Then filled the voids with resin. It’s so pretty and I don’t know what to do with it. I know I don’t want to turn the whole thing into wood shavings and saw dust….

It’s about 2” square. A little larger on one end.


r/turning • • 2d ago

Best way to get things to stand straight

3 Upvotes

Hey,

I'm pretty new to turning and have been trying to make some candlestick holders. I'm having trouble figuring out how to make the bottoms sit flat. Using a saw tends to be skewed. Do you make a groove and then snap it off and sand? If so, what's the best tool for this? Do you make it concave? Please help - thanks!