r/AskAMechanic • • 4h ago

Could this be deliberate?

Post image
0 Upvotes

2021 Toyota RAV4 Hybrid

Hi. My car had a front suspension fix done two weeks ago at my usual garage, with no other problems reported with car, with car's UK MOT passed in October with only the nsf suspension fixed advised.

Two weeks later I take the car to a different garage for new front tyres and after removing the wheels they straight away tell me the NSF CV boot seal is damaged and leaking badly. See picture. It looks like something has punctured it, right in the seal edge.

Obviously, I can't prove the first garage has done anything malicious with the CV boot, but should I question this with them, as it is only two weeks since they last fixed the same side front suspension?

Should I trust the first garage with my car anymore?

Thanks for any advice.


r/AskAMechanic • • 10h ago

2021 Lexus ES350 3.5L V6

Post image
0 Upvotes

My Ltft are high at idle. I smoked the vacuum line from the the intake hose into the compensated motor mount and there’s a leak at the engine mount. Out of this port. What does that mean. Are the internals busted? Any advice?


r/AskAMechanic • • 13h ago

Benzol Motor Oil

0 Upvotes

Hello. I have a 2023 Hyundai Santa Cruz Limited(2.5L Inline-4 (Turbo) which takes 0w30.

Today at the quick lube(hard to do an oil change myself since I live in an apartment) the guy used Benzol Motor Oil 0W30. I ask if it was rated API SP and he showed me the container that said it was.

I'm going on a 4 hour road trip each way soon up to the mountains and want to know I'll be ok.

Has anyone used this oil before?


r/AskAMechanic • • 20h ago

Mechanic changed my oil but couldn't find a compatible oil filter. Is it safe to leave the car until Monday?

0 Upvotes

Hi everyone! I have a 2005 Mercedes-Benz A190 and I could really use some advice.

I went to a mechanic today (Saturday) to get my oil changed. However, he drained all the old oil before checking whether he had a compatible oil filter for my car.

After draining the oil, he told me he didn't have the correct filter for my Mercedes. He then put new oil in the engine and asked me to come back on Monday so he could install the new oil filter.

I live only about 2 minutes away from the mechanic, so I’m planning to leave the car parked until Monday and drive it straight back to his shop.

I also noticed that a few drops of oil leaked after the service.

My questions are:

  1. Could leaving the car in this condition until Monday cause any damage to the engine?
  2. Is it safe to drive those 2 minutes to the mechanic on Monday, or should I have the car towed?
  3. Could the few drops of leaking oil indicate a bigger problem?

I'm worried about damaging the engine. Any advice would be greatly appreciated. Thank you!


r/AskAMechanic • • 14h ago

2015 Chrysler 200 Limited Caliper Bracket Bolt?

Thumbnail
gallery
6 Upvotes

I decided to replace my brake pads and rotors, I go to take off the caliper bracket bolt with my impact wrench 6 head 3/8 inch 17mm socket and it will not budge. I’ve tried heating it with blow torch. Nothing. Now I tried looking it up and one site says it’s a hex flange, other says e Torx. When to buy e Torx and they said they don’t sell 17mm in e Torx “it doesn’t exist” I’m pretty stumped.

I’ve attached photos.


r/AskAMechanic • • 12h ago

Mobile mechanic only bled one wheel and my parking brake came loose during the job. Reasonable to ask for compensation?

0 Upvotes

Looking for a sanity check and advice on how to handle this. Based in Southern California.

I supplied my own rotors and pads (ordered from RockAuto) and hired a mobile mechanic to install them plus bleed the brakes. He has a highly-rated Yelp page with good reviews going back about a decade, so I figured I was in safe hands. I've since learned he has no BAR (Bureau of Automotive Repair) registration, which as I understand it is actually required to do auto repair for the public in CA.

Total was $420 cash: $370 for the pad/rotor install and $50 specifically for a brake bleed. Here's what's bugging me:

He only bled one wheel. I paid for a brake bleed and he did just the front driver side, said that was "enough." My understanding is a bleed means all four corners in sequence.

He skipped slide-pin lube and didn't clean the hub mounting surface, even after I specifically asked him to. He said it wasn't necessary.

He never test-drove it or even started the car. If he had, he'd have seen the dash warning light.

My parking brake connector came loose during the job and won't reseat. It was completely fine before I handed him the car. He says it's not his fault, tried to fix it, couldn't, and left. The issue is right at the rear brakes he was working on.

I've now taken it to my regular shop where it’s $45 just for diagnosis, plus whatever the connector repair costs.

My questions:

Are the one-wheel bleed and skipped slide-pin lube / hub cleaning legit workmanship problems, or am I being picky?

On the parking brake, even if he claims that he didn't directly cause it, isn't failing to test the car and catch it on him?

What's reasonable to ask him for? I'm thinking the $50 bleed, the $45 diagnosis, and at least some cost on the connector.

Worth a BAR complaint / small claims if he won't cooperate, or not worth the headache over this amount?

I'm not trying to ruin a hardworking guy, just want my actual problems fixed and to be treated fairly. Appreciate any advice.

2015 Outback


r/AskAMechanic • • 18h ago

Oil filter help

Post image
0 Upvotes

I could not get this filter off to save my life. Going to bring it somewhere to get it changed. Is it safe to drive with it like this? Limit to short trip?


r/AskAMechanic • • 17h ago

Would it be safe to air these up to roll em up on a trailer. 05 Buick la saber.

3 Upvotes

r/AskAMechanic • • 2h ago

Is my car leaking oil?

Post image
0 Upvotes

Just got a new (to me) 2019 Rogue. Only 60k miles. Had it visually inspected by my mechanic in Lieu of a ppi, as my mechanic had no room for an appt on the hoist that day unfortunately. He had said no red flags, no rust, everything Looked and sounded good, except there was a little oil wetness on something, I can’t remember what he said, but he said it could just be a drip from where they did an oil change so I didn’t worry about it.

The dealership also showed me everything they inspected. It drives great, and seemed to be in excellent shape. It had just had a transmission drain and fill as recommended by Nissan at 50k miles and was treated with rust proofing multiple times over its life. And oil changes every 6-7k miles So I felt confident it was in good shape.

I drove it for about an hour from the dealership, parked it overnight, and didn’t drive it again til the next evening, about 20 hours later.

When I came home, I parked in a different spot, and noticed the photo below. Not just a spot, but it’s trailing. I’ve never seen anything like that before. I goes for about 20-30 feet and tapers off. It was from between the front wheels. It didn’t evaporate several hours later, so I’m assuming it’s oil?

just curious if you can tell me what could cause this and is it safe to drive, and will the dealership do anything??? There’s no way they didn’t know about this, right? I noticed it Less than 24 hours after buying it. And they just replaced parts a day before.


r/AskAMechanic • • 10h ago

how negative a thing would it be to remove that little shield piece around the brake area?

0 Upvotes

2019 Hyundai Santa Fe. That piece started rattling or at least I think that’s what it is on my left front tire whenever I make a right hand turn. It also rattles when I go over bumps. Someone said they thought they could just rip it off for me. I declined because I don’t know how important that is. also, I live in the north, so we are going into winter- heavy salt and snow.


r/AskAMechanic • • 15h ago

New 2027 Nissan Z VR30 engines

0 Upvotes

Hey guys, would I be a moron to purchase a new VR30 engine from Nissan?

Ive read extensively about the issues the Q50s had with the engine, but have heard little about the new Z having many problems.

Wondering if there are any Nissan Techs who can share their expertise?

Am I an idiot for wanting to buy one of these?


r/AskAMechanic • • 15h ago

Honda Civic 2012 parasitic discharge mystery

0 Upvotes

I have a Honda Civic 2012 (automatic, around 180k km) whose battery keeps dying overnight (around 1.5 days at most).

I've tried:

  • Changing the battery. The problem stays, so I assumed I either have a ground or parasitic drain. The initial battery was just 2 years old.
  • Checked the alternator, it seems to be giving enough voltage to charge the battery while driving.
  • Unplugging the bluetooth module. Still dies
  • Measured parasitic discharge by measuring amps in series with the battery. It gave me a constant -1.2 amps discharge, which explains why the battery keeps dying.
  • With the multimeter in place, I unplugged one fuse from the Engine box at a time until it dropped. The current dropped when I removed Fuse #29 ("Backup").
  • Just to be sure, I did the test in multiple ways: Just after closing the doors, just after unplugging the battery to place the multimeter, and 45 minutes after placing the multimeter. So I assume it rules out the car not being asleep.
  • I read in the user manual that Fuse #29 could be linked to more fuses in the Cabin box. I unplugged all of them one at a time, but the current draw stayed at -1.2amps.

I'm not sure what to try next to troubleshoot, I can't find much deeper relevant information regarding this. Any ideas?


r/AskAMechanic • • 16h ago

Transmission fluid help

Post image
0 Upvotes

I drained my fluid and added 7qts. My driveway is unlevel and i have not started or driven the truck at all. Is this too filled or do i need to start and drive to get real reading? It is on a 2007.5 6.6l duramax


r/AskAMechanic • • 16h ago

My 2010 Subaru Forester is making this noise. What could it be?

0 Upvotes

My power steering fluid was low, so I topped it off and this helped noise but didn't fully resolve it. This noise happens when:

Backing up while making a tight turn

Turning the wheel almost all the way to lock in either direction when parked, or fully to lock while driving

More often in the cold!

Also, I have an issue when I first turn out of the driveway where the steering wheel is stiff on first turn, but 99% of normal driving there is no noise. Most of the time it's backing up or making really sharp turns I don't normally make too often. I know I probably have a power steering fluid leak


r/AskAMechanic • • 18h ago

Thinking of installing a remanufactured alternator in my 2013 Mazda 3 skyactive 2.0

0 Upvotes

I have read and seen videos that say you should really use an oem alternator but that will take a few days to get to me and I’ve got one from Autozone coming today. I don’t even know for sure how difficult of a time I will have getting the old one out mostly due to the ac lines being in the way.
Would I be wasting my time and money? I really don’t want to do this again anytime soon but I need my car asap as it’s my only vehicle.
Any advice would be greatly appreciated.
Thank you


r/AskAMechanic • • 19h ago

A red squirrel made a nest in my red pickup. Do I need to replace this or can I just remove it?

Post image
0 Upvotes

A happy little squirrel found a happy little home under the hood of my pickup this fall. Do I need to replace this cloth insulation, or can I just take it all the way off? If it matters, I live in Wisconsin and it is a 2007 4.0 L Ford Ranger.


r/AskAMechanic • • 21h ago

2018 Toyota Camry SE - P1366 and C1201

0 Upvotes

Hey guys, I have a 2018 Toyota Camry SE auto 2.5L with 162k miles on it…it’s my family’s only car and I need some help. I’ve done some car work before and can handle myself, but I’m on a tight budget and need to make this work. The two codes are what it’s giving me with the CE on, I know where the camshaft position sensors are located but want to double check with you guys before spending the money and swapping them out. Any thoughts to help me out? Thanks all


r/AskAMechanic • • 22h ago

Sunroof stuck open on 2005 Tahoe

0 Upvotes

I recently bought a 2005 Tahoe and noticed after buying that its sunroof was just partially cracked. I opened it and then tried to close it again to re-seal and it is now stuck completely open. When I looked at it from up top, I noticed the metal brackets are broken near the front of the car.

All I want is for it to be closed and sealed, I don't want to do any crazy expensive sunroof repairs to get it operational.

My two questions are:

1: how much am I looking at in cost just to get it closed?

2: Should I take it to a mechanic or some type of specialty shop?


r/AskAMechanic • • 22h ago

Rust under the car

Thumbnail
gallery
0 Upvotes

How bad this looks for you .mazda act 5 2016 77k miles .


r/AskAMechanic • • 23h ago

98 corolla ve, very subtle strange noise

0 Upvotes

Attached video. The noise is the like almost "woof woof woof woof" but its veeeery quiet. The actual shop dudes were like not sure at all said maaaaybe its alternator and literally discounted the entire cost to look at it. They been a solid shop.for everything else, this is driving me nuts though..

98 corolla ve, 120k miles


r/AskAMechanic • • 17h ago

Help!

Post image
4 Upvotes

Does this look to be seated correctly?


r/AskAMechanic • • 23h ago

Will a vehicle pass a UK MOT under the new rules if the DPF has been deleted?

0 Upvotes

Will a vehicle pass a UK MOT under the new rules if the DPF has been deleted? Thanks.


r/AskAMechanic • • 8h ago

25 F-150 Rear End Popping

0 Upvotes

My 2025 F-150 has been making a popping sound when the suspension is under load. It occurs when driving onto or off of uneven surfaces, like going off road or pulling into a ditch or steep incline from a flat surface. My friend and a couple other guys mentioned they think it could be a differential issue. My friend inspected it and deducted it wasn’t the leaf springs because he couldn’t feel anything while touching them while the popping was occurring. Here’s a video of me pulling into a ditch and causing the popping. Any advice or possible diagnoses are appreciated.


r/AskAMechanic • • 16h ago

Which hose is the inlet and which is the outlet for the heater core on my [1997 Ford Ranger 3.0]?

Post image
0 Upvotes