r/AskAMechanic • • Jul 15 '26

Technician Flair Request Thread - New

12 Upvotes

If you would like to have verified flair added we will need a pic that has your reddit name on a piece of paper with your shop in the background or work truck if mobile repair.

For the professional technicians we're doing Verified Tech flair along with a very short description of your experience if you'd like. You can be a dealer/independent tech, retired, instructor, fleet, heavy equipment, small engine repair, lube/tire tech etc...

You can either send that to me in a chat request or upload the pic to an image hosting site like imgur.com (we had to disable the option to upload pics in the comments because of abuse). The option to attach a pic in chat will be available after I accept the invite. Please do not use modmail

We will also do Shadetree flair for those that do auto repair as more of a hobby than profession. Approval of this flair is not guaranteed.

archived previous request post


r/AskAMechanic • • Mar 15 '25

Announcement - New Rules - Please read!

27 Upvotes

Hello r/AskAMechanic users! Over the last year or so, the volume of daily posts has increased a decent amount leading to many posts that would be more appropriate in other subreddits. To keep this subreddit focused on what it's meant for, providing automotive mechanical and diagnostic help, we have rewritten the rules. Some of the rule changes also affect commenters, so please review the rules here or below. Thank you for your understanding.

 

1 - The title should clearly state the issue - Do not ask "am I cooked/fuc!ed/screwed/toast etc" questions

State your root issue as clearly as you can in the title, and then you will have a better chance of your post being viewed. We will remove the "am I cooked", "am I fuc!ed", "how screwed am I", "am I toast" and similar types of questions. This also includes any other senseless titled post. In the message body, provide the specifics (detail/context) to your question. Also include in the title or body the Year, Make, Model and engine size of your vehicle.

 

2 - No autobody damage/repair/frame/paint or rust related questions

Posts related to autobody work (including repairs, painting, frame damage, "is it totaled?", dents or detailing) are not allowed. A more appropriate sub would be r/autobody. If you're inquiring whether your car is totaled r/insurance would also be helpful. r/AutoDetailing for detailing questions.

Questions about damage to bolt-on parts like headlights/tail lights, wheels and suspension are ok.

Questions asking about the level/condition of rust on the frame/undercarriage/body are not allowed.

 

3 - No asking for advice about buying/selling cars or used car deals

We do not allow asking if a used car for sale is a good deal, the condition of the used car, or recommendations on what car you should buy. For recommendations on what car to buy, r/whatcarshouldIbuy would be a good sub. r/askcarsales might also be helpful.

 

4 - Keep things professional & don't be disrespectful

Please be professional and helpful. Do not comment/post with insults, racism, jokes, memes, NSFW, spam, opinions without context etc. You may see things that compel you to leave a nasty comment, just don't do it. It's not necessary or helpful. People who don't know anything about cars will come here to ask us for advice, try to educate them about their vehicle without turning them off from the sub. If you don’t know the proper fix or advice, please refrain from commenting on a post.

 

5 - No "Read the owners manual" or "RTFM" type of comments

People who don't know anything about cars are going to ask some very basic questions. Some of which will have answers in the manual. Answering OP's question with only "Read the owners manual" is like giving the answer "google it", both are non-answers. Either provide an actual answer to OP's question, or at the very least, provide a link to a readable online owner's manual.

 

6 - No dangerous/reckless or unethical/illegal comments/posts

This is a community dedicated to sharing genuine advice. Advice shown to be given in bad faith (including dangerous/reckless and unethical/illegal advice) will be removed and the users will be banned. Please report any dangerous/reckless or unethical/illegal advice.

 

7 - No AI/ChatGPT comments/posts

Posts with AI-generated content is not allowed. Posts looking for feedback, training or even just to show off your AI/LLM are also not allowed. We are not interested in AI automotive diagnostics here.

Do not answer OP by using AI/ChatGPT etc. Nobody wants to read a wall of text that over explains and gives 25 different possible solutions.

 

8 - No advertising or soliciting services

Advertising of services or products is not allowed. That includes affiliate links, social media, clothing, tools, your YouTube videos, etc.

Do not solicit services, including linking to videos, blogs, or websites that then forward to a paid service. Avoid asking to "DM me" as much as possible.

 

9 - No NSFW, meme, or 'joke' posts

No NSFW is a no-brainer - you will be banned with no chance of an appeal. Memes and 'joke' posts belong at r/AskAShittyMechanic

 

Update 03/23/2025: Added "am I toast" to rule #1 and "frame damage" to rule #2
Update 05/08/2025: Added more context to rule #7


r/AskAMechanic • • 1h ago

Transmission Fluid Clear/Amber After Top-Up?

2 Upvotes

Hey everyone,

I recently took my 2001 Subaru Legacy automatic for a transmission change/drain and fill(101000km). They told me my transmission fluid was extremely low, pretty much empty, and topped it up with approximately 1.3 litres.

They mentioned there could potentially be a leak. I’ve since been monitoring it and tried the cardboard trick overnight to see if I could spot any leaks. It looks like it could be coming from the driver-side area being pinkish so now I now I booked a mechanic.

The car drives perfectly fine. No slipping, clunking or delayed shifting.

I checked the correct fluids, and it looks very clear with a slight yellowish/amber tint rather than red. The level is now above the low mark.

Can transmission fluid look clear or amberish after being topped up with fresh fluid, or should I be concerned?


r/AskAMechanic • • 1h ago

Strange noise/braking after wheel change

2 Upvotes

2013 Nissan Altima, 270k KM.

Swapped out the summer tires for winter tires today. After installing, I took it for a small drive and there was horrible scraping sounds coming from the front and the brakes were spongy and aren't working well at all.

Jacked it back up to remove the wheel and 2 of the nuts/studs were stripped upon removal. I couldnt see anything out of the ordinary.

I may have overtorqued the nuts when installing. Would this cause all this?

Car is heading to the shop on Monday, but I'm just wondering what the hell I did wrong.


r/AskAMechanic • • 5h ago

Could this be deliberate?

Post image
3 Upvotes

2021 Toyota RAV4 Hybrid

Hi. My car had a front suspension fix done two weeks ago at my usual garage, with no other problems reported with car, with car's UK MOT passed in October with only the nsf suspension fixed advised.

Two weeks later I take the car to a different garage for new front tyres and after removing the wheels they straight away tell me the NSF CV boot seal is damaged and leaking badly. See picture. It looks like something has punctured it, right in the seal edge.

Obviously, I can't prove the first garage has done anything malicious with the CV boot, but should I question this with them, as it is only two weeks since they last fixed the same side front suspension?

Should I trust the first garage with my car anymore?

Thanks for any advice.


r/AskAMechanic • • 1m ago

E39 525D 2001

1 Upvotes

Hey everyone!

I have a 2001 BMW E39 525d, and I’m dealing with a pretty serious coolant leak.

The car loses around 1 litre of coolant overnight.

Winter is just around the corner, and temperatures are starting to drop below freezing.
I have to drive the car to work early every morning, so leaving it parked isn’t exactly an easy option.
I currently have about 1 litre(around 1qt) of spare coolant left, but obviously that’s not going to last forever at this rate.
As you can see in the video, the coolant is dripping directly onto the belt and then running off the belt onto the ground.
What would be the smartest decision in this situation? Would you keep topping it up and drive carefully until the leak can be fixed, or stop driving it altogether?
Could the leak be coming from somewhere above the belt? Has anyone experienced something similar on their E39 M57?
Any advice or suggestions would be greatly appreciated!


r/AskAMechanic • • 4m ago

Ford Transit Engine problems

1 Upvotes

r/AskAMechanic • • 28m ago

I hope it's a simple question

1 Upvotes

I just bought a wheel and tire package, want to reuse the old rims for winter tires next year..

is there an easy way to remove old run flats from beat up rims without beating them up too much?

they're already fucked up a bit with road rash, but good enough for a winter set of tires before next year..

my mind says, deflate, sawzall the tire into quarters without hitting the rim, and just snip the remainder near the bead.. and rims are clean..

any insight before I get my tools out?

I appreciate any advice.


r/AskAMechanic • • 45m ago

20011 Chevy avalanche Vortec engine. Was driving down the road going about 35 and it sounded like a deer hit the right side of the truck.

1 Upvotes

I don’t see any damage to the vehicle but it was loud, I stopped and looked all the way around and nothings there, gauges are fine as well????


r/AskAMechanic • • 47m ago

1.4tsi CAXA strange sound?

1 Upvotes

This sound apears only at iddle,and only when engine is on operating temperature.When driving,everything is normal.

No erors on diagnostics.

When i put my head near engine,i think it comes from front part od the engine.

Sound is like metal/valve whistle.

I drive like this for 5K km and sound dont get any lower or higher in volume.

Waterpump was my first gess,but its changed 15k km ago and sound of bad waterpump is like e-engine spining,constant noise but my noise have diferenr rytm.


r/AskAMechanic • • 48m ago

Weird noise when slow and stopped from rear. (2002 Toyota Tundra)

1 Upvotes

Truck makes a super annoying vibrating sound when Im in reverse or creeping slowly on drive, and makes it worse when I turn the wheel. only thing I saw that changes it for the better was lifting the driveshaft by the carrier bearing. any guid would be greatly appreciated. Thank you


r/AskAMechanic • • 2h ago

Replaced Axle Seal, Still Leaking

1 Upvotes

2018 4Runner

Hey y'all, last week I observed my rear passenger brake assembly soaked in oil. I suspected a bad caliper and replaced, but it turned out not to be the caliper leaking. Did some more research and found the axle seal to be the next most likely culprit.

Purchased two seals and replaced both sides. Passenger side rear seal had a visible tear (the leaking side). When I pulled the driver side it was intact but tore upon inspection.

The original leaking side is still leaking after replacement. Bad install or something else? Looking back on the install I did not grease the seal with anything except giving it a smear of diff fluid.

What do you think? Pull leaking side, inspect, and replace again?


r/AskAMechanic • • 3h ago

Is my car leaking oil?

Post image
0 Upvotes

Just got a new (to me) 2019 Rogue. Only 60k miles. Had it visually inspected by my mechanic in Lieu of a ppi, as my mechanic had no room for an appt on the hoist that day unfortunately. He had said no red flags, no rust, everything Looked and sounded good, except there was a little oil wetness on something, I can’t remember what he said, but he said it could just be a drip from where they did an oil change so I didn’t worry about it.

The dealership also showed me everything they inspected. It drives great, and seemed to be in excellent shape. It had just had a transmission drain and fill as recommended by Nissan at 50k miles and was treated with rust proofing multiple times over its life. And oil changes every 6-7k miles So I felt confident it was in good shape.

I drove it for about an hour from the dealership, parked it overnight, and didn’t drive it again til the next evening, about 20 hours later.

When I came home, I parked in a different spot, and noticed the photo below. Not just a spot, but it’s trailing. I’ve never seen anything like that before. I goes for about 20-30 feet and tapers off. It was from between the front wheels. It didn’t evaporate several hours later, so I’m assuming it’s oil?

just curious if you can tell me what could cause this and is it safe to drive, and will the dealership do anything??? There’s no way they didn’t know about this, right? I noticed it Less than 24 hours after buying it. And they just replaced parts a day before.


r/AskAMechanic • • 3h ago

Triumph spitfire starter issue

Thumbnail
gallery
1 Upvotes

Issue - 1973 triumph spitfire - Car was running then died, starter & solenoid replaced, just get a clunk when turning key from solenoid. no voltage running off the red/white wire from the starter to barrel, (ignition wire?) loose double white wire not connected to a terminal (may have pulled off when taking cover off) Don’t think I can get a voltage reading with the switch disconnected, (runs off the key being turned?)


r/AskAMechanic • • 4h ago

Question about a 2002 Toyota 4Runner 3.4L V6 transmission?

1 Upvotes

How do I know when I need to have the transmission serviced? I bought it a couple weeks ago and it has 271K on it. As far as I know, the previous owners have never done it and the fluid is dark so I'll be changing that regardless, but when? And is that all I should do (to the transmission specifically, I'm doing other maintenance already), the fluid and filter? A rebuild kit crossed my mind but is that excessive? I've been told not to have it flushed because that can dislodge things and potentially cause slippage, especially if it was never done before. It starts and drives well, but I've noticed that if I have to slow down before a hill, accelerating to go back uphill is.... a bit of struggle? It goes, but it feels like it's dragging a little is the best way I can describe it, like I'm pulling a ton of weight or something but I'm not. I can hear a very faint whine noise when it's happening, like it's at risk of slipping? It sounds sort of like when you go to crank up a cold diesel or something, that "wha...wha...wha..." before it turns over and starts, but it only happens when I'm accelerating up a hill from a slow/stop and it's very quiet, I can only hear it with the radio completely off. Everything else about the vehicle seems fine, in every other way it drives great, but not knowing much about cars makes me nervous so I figured I'd ask some smarter people. Is this even a transmission issue? I've convinced myself it is but I don't know enough to be sure. Is this even a problem or am I just being a paranoid dumb girl about it? Idk. Any help is appreciated


r/AskAMechanic • • 15h ago

2015 Chrysler 200 Limited Caliper Bracket Bolt?

Thumbnail
gallery
7 Upvotes

I decided to replace my brake pads and rotors, I go to take off the caliper bracket bolt with my impact wrench 6 head 3/8 inch 17mm socket and it will not budge. I’ve tried heating it with blow torch. Nothing. Now I tried looking it up and one site says it’s a hex flange, other says e Torx. When to buy e Torx and they said they don’t sell 17mm in e Torx “it doesn’t exist” I’m pretty stumped.

I’ve attached photos.


r/AskAMechanic • • 11h ago

Crankshaft Pulley Wobble

3 Upvotes

2016 Ford Edge 2.0L eco boost
I was using a stretch belt tool to change the serpentine belts. I tried removing the auxiliary belt with the tool a couple times but ended up cutting the belt to remove it. After changing the belts, the crankshaft pulley has a slight wobble to it. Is this enough to be concerned about? Was thinking of taking it to a mechanic after the weekend but thought id ask the crowd here until then. Thanks.


r/AskAMechanic • • 8h ago

F150 power steering pump pulley bearing shot out , pump got hot and Mount bolts, Welding in place! Can' I grind heads off Have new pump + block bolts easy out stem+ old treads? 🤞🏻

1 Upvotes

2008 5.4 L v8 FX4 F150

CrewCab


r/AskAMechanic • • 9h ago

I need help

1 Upvotes

I own a 98 pontiac grand prix with the 3.8 L V6 and it's constantly overheating ive replaced the thermostat as well as had a coolant flush and it refuses to get coolant into the engine the water pump is not leaking and all the belts, hoses, and tubes are fine i have no idea what else to do


r/AskAMechanic • • 10h ago

25 F-150 Rear End Popping

0 Upvotes

My 2025 F-150 has been making a popping sound when the suspension is under load. It occurs when driving onto or off of uneven surfaces, like going off road or pulling into a ditch or steep incline from a flat surface. My friend and a couple other guys mentioned they think it could be a differential issue. My friend inspected it and deducted it wasn’t the leaf springs because he couldn’t feel anything while touching them while the popping was occurring. Here’s a video of me pulling into a ditch and causing the popping. Any advice or possible diagnoses are appreciated.


r/AskAMechanic • • 10h ago

Looking for advice to manage a muddy Undercarriage & Lower Front Bumper damage on my 2011 Toyota Hybrid Prius

Thumbnail
gallery
1 Upvotes

My under-car splash shield had to be ripped out months ago. At the time, a trusted mechanic told me I didn't need to replace it. Since then, the right side of my front bumper (passenger side) has started to hang a bit.

Tonight, I mistakenly drove into this huge muddy hole on an unpaved, county road. For about 30 seconds, my car was stuck and I had to reverse- fortunately, I got out.

Now, my bumper is fully sagging and the hood of my car is raised. I tried to take the best photos I could since I just arrived home.

I plan to take my car to the mechanic, but I’m wondering what to expect. The exposed undercarriage of the front end of my car is drenched in mud. What can I do to avoid any problems w/my car? Should I expect really bad news?

Also, please don't leave any mean or unhelpful comments. I got lost driving and followed google maps- which landed me in this worsened predicament. I appreciate any advice to help fix my issue.


r/AskAMechanic • • 10h ago

2017 Ford escape se 1.5l ecoboost coolant leak.

Thumbnail
gallery
1 Upvotes

Hello I need help getting the part number and name of the hose I have a leak of coolant and see that this hose is spraying out coolant when I squish it I can hear like a oozing spraying sound and hear it I need help identifying the hose so I could get the part and replace it thank you in advanced.


r/AskAMechanic • • 14h ago

Steering wheel has been funky since I hit a ditch

Thumbnail
gallery
2 Upvotes

Hi all, I have a 2023 Hyundai Elantra Limited. I unfortunately hit a ditch in the dark and since then my steering has been funky. I got it checked at VIP tires near me and they took me to the rack and showed me play with both the control arms and one was significantly bent. I got them both replaced with a set of aftermarket control arms and also got an alignment (attached).

However, the steering still feels off. On a straight highway the steering loves to default to a tiny bit towards the right and I have to apply a gentle counter pressure for it to remain straight. On long rides I have to basically keep doing such micro-adjustments so that the car drives straight and very rarely I find a stretch of road where it'll go straight without my input on the steering wheel.

I took it back to VIP tires and they apparently fixed it but I saw no improvements. I'd go again but I want to know what to expect.

This issue is even more noticable on slope-y roads which happened to me today. I was at a red light and when I was centering my car by slowly going left, the steering wheel just didn't want me to steer left and felt very firm and stiff.

Thank you! I really appreciate any help!


r/AskAMechanic • • 11h ago

2021 Lexus ES350 3.5L V6

Post image
0 Upvotes

My Ltft are high at idle. I smoked the vacuum line from the the intake hose into the compensated motor mount and there’s a leak at the engine mount. Out of this port. What does that mean. Are the internals busted? Any advice?