r/Creality • • 1h ago

Show Off Making movie nights a little more comfortable

Thumbnail
gallery
4 Upvotes

Designed this sofa tray so I can keep my drink and snacks right next to me without needing a coffee table.

It has a recessed cup holder to keep your glass in place and a larger tray area for a snack bowl or anything else you want within reach.

It's all printed as one piece, and I really like how the rounded shape turned out. Perfect for those evenings when you don't feel like leaving the couch!

Creality Cloud -Sofa Tray From fifindr https://www.crealitycloud.com/model-detail/couch-sofa-tray

Hope you like it!


r/Creality • • 1h ago

Show Off My dad requested a spiny lobster

Thumbnail
gallery
4 Upvotes

The clean up alone was a bloody nightmare. But the model was designed well and wasn't weak. So I got it all without breaking it.

I am not a painter by any means. I'm mostly happy with the result though.

I got the model here

https://www.myminifactory.com/object/3d-print-crabfish-lobster-378228

Dude did a great job on the design. It is really details and we'll designed


r/Creality • • 5h ago

♻ Filament Help K2 combo - recommended Filaments

1 Upvotes

Hey recently picked up a K2 Combo from Costco and it has been great so with the included hyper PLA. I would like to pick up some PETG and CF filaments.

I have access to microcenter, what would be a good filament to pick up, are there profiles available for other filaments besides Creality RFID?

I also only have the stock CFS, but considering picking up a dryer to work with PETG and other materials. Does everyone just leave the filament in the dryer until time to print and then put it in the CFS?

Appreciate any advice!


r/Creality • • 5h ago

Troubleshooting K1C, filament keeps getting bunched up in the extruder, have to open it up to clear. Any idea what's causing this?

Post image
6 Upvotes

I mostly just print with PLA, this happens with multiple brands including Creality. Nozzle is a Microswiss 0.4mm, using Creality software at stock settings for filament. I've had this trouble intermittently since I first started using the printer.

I replaced the extruder a couple weeks ago, printer has been perfect through multiple prints until last night when it plugged up again. I've been retracting/extruding filament between prints. Last night it was <5 minutes since the last print, so I didn't do this beforehand, I just noticed it wasn't printing any filament. It wouldn't retract or extrude, an on opening the extruder I found this again.

I plan on replacing the extruder again, this time with a DXC as an upgrade. But is there another cause I'm missing? Is this just common with the K1C?

Edit: lots of great suggestions, looks like heat is the biggest issue. I just wanted to say how much I appreciate the positive, helpful comments. It's a sign of a healthy community, something I've not always found on reddit or within the printing subs.


r/Creality • • 7h ago

Mods & Upgrades Is it worth it?

Thumbnail reddit.com
1 Upvotes

r/Creality • • 12h ago

♻ i7 Help Small holes on the edges

Post image
1 Upvotes

r/Creality • • 12h ago

♻ K2 Help Exhaust Air Filters Help

1 Upvotes

Hello, got a k2 Combo from the good old Costco(they have everything even Degrees!!)

Was looking into things while printing and I would like to get a magnetic solution for the exhaust ports to help filter the fumes. I am limited sadly in porting fumes to the outside. If any one has a name to a file if possible or links I would greatly appreciate the help. Most files I have found have been for the K2 Plus only sadly.

Any help would be appreciated and my 1st print was for 25mm bases to play with my war dollies :D


r/Creality • • 15h ago

Troubleshooting Does anyone know the Pin out for the Creality HI Z axis switch?

Thumbnail
gallery
3 Upvotes

Hi peoples of Reddit. I just bought a stupid cheap Creality HI combo off of Marketplace.

If someone would be willing to take theirs apart to check i would be forever grateful. Thank you

It was listed that it needed some work done to it.

It appears it is missing the Z stop cable that goes up to the sensors on the top rail (both sensors are there and are connected.

I have a plug and someone attempted to fix it. Does anybody know the wiring diagram on the whole system? Top and bottom?

Or even a part number for it?

Second pic is what I found off Google of what it should look like.

Thank you all


r/Creality • • 16h ago

Show Off G-flex on K1C

Thumbnail
gallery
12 Upvotes

Just got my G-flex filament from Polymaker and wow!!!!


r/Creality • • 21h ago

Mods & Upgrades Has anyone given up?

Thumbnail reddit.com
0 Upvotes

My K2plus worked amazing for the first 60 days and since then it’s been nothing but problems. Creality sends new parts but it always comes back to belt tension issues. My plan was to always have 2 machines. I really wanted the K3 but now I don’t think I trust Creality.
Does anyone here have a Bambu? How do they compare? Did I just get a bad machine?


r/Creality • • 21h ago

Hardware Help New Printer Calibrations

Thumbnail reddit.com
2 Upvotes

r/Creality • • 21h ago

✅ Solved! What was that tyre pressure, again?

Thumbnail gallery
32 Upvotes

r/Creality • • 23h ago

Troubleshooting Creality Ender-3 V3 KE Upgrade: Could a Larger Fan Help Prevent Heat Creep?

Thumbnail
gallery
4 Upvotes

After dealing with repeated clogging issues with my Unicorn hotend, I'm preparing another upgrade for my Ender-3 V3 KE: replacing the original cooling fan with a larger 4010 24V fan.

My suspicion is that these recurring clogs may be related to Heat Creep, which occurs when heat travels too far up into the heatsink, causing the filament to soften before reaching the melting zone.

The goal of this upgrade is to improve heatsink cooling, keep the cold side of the hotend at a more stable temperature, and prevent premature filament softening.

But here's the question: Could upgrading to a larger 4010 24V fan actually help reduce heat creep on the Ender-3 V3 KE?

Has anyone tried this modification? Did you notice any improvement? I'd love to hear from people who have experienced similar issues!


r/Creality • • 23h ago

Show Off Screw-on lids are surprisingly satisfying to print

Thumbnail
gallery
13 Upvotes

Designed these screw-top containers to keep small stuff organized instead of having it scattered around my desk.

They have a threaded lid with a ridged edge for a better grip, and the body and lid are printed separately, so you can mix and match colors.

Great for storing screws, small parts, or pretty much anything that needs its own little container. Really like how the two-color combinations turned out!

Creality Cloud -Screw Lid Container From fifindr https://www.crealitycloud.com/model-detail/screw-lid-container

Hope you like it!


r/Creality • • 1d ago

♻ i7 Help Sparkx i7 Colour Combo- worth it?

2 Upvotes

I've been looking around at getting my first 3D printer after using my library's Prusa i3 and Bambu X1C, and after searching both new and used, I'm thinking I may just pull the trigger on something new.

The Creality Sparkx i7 colour combo is on sale right now for $400 CAD and seems like a pretty comparable model to the Bambu A1, albeit cheaper by almost $100 with an enclosed filament system to boot.

The biggest question is, is it worth it? I see the i8 is about to become available and i also don't see that many reviews of it in the wild without someone simply saying "buy the A1 mini" with no real reference as to quality or usability. Curious as to what others have to say about it.


r/Creality • • 1d ago

Troubleshooting Ender 3 won't print after upgrade to BTT SKR V1.4 board

Thumbnail reddit.com
2 Upvotes

r/Creality • • 1d ago

♻ K2 Help How to vent my printer

0 Upvotes

I have a K2, not a K2Pro or Plus or Combo, just a straight up K2 and I want to print some parts using ABS. I want to create a vent for the fumes to go out the window, but I honestly don't know which of the fans blows in to cool the enclosure and which blows out to vent it. Help. please?


r/Creality • • 1d ago

♻ i7 Help Bed concern

Post image
2 Upvotes

I have a sparkx i7, and I use 99% IPA to clean the bed plate after using dish soap. I then did it without the plate and initially i thought this was a smudge or something, But it literally peeled some of the "black paint" on the bed? Am i going to be fine? It's just a small spot


r/Creality • • 1d ago

Mods & Upgrades CFS Dryer - Humidity Vent (no mod)

Thumbnail gallery
5 Upvotes

r/Creality • • 1d ago

Show Off 🌺 Poinsettia Tea Light Holder 🌺

Thumbnail
gallery
6 Upvotes

I created this design for my wife, who really loves poinsettias and candles during the Christmas holidays. I combined those two elements to come up with this design!


r/Creality • • 1d ago

♻ i7 Help Sparkx i7 extruder error

1 Upvotes

Getting the first 2-3 layers down perfect but then i keep getting the extruder error that its not extruding.

I have cleaned the hot end, cleaned the extruder gear unloaded all filament and refit the ptfe tubes and reloaded filament.

nothing.

The only print i have had run spot on was a benchy i ran as the first print, i did a plate with 3 of those lflexi dragons and they printed but the quality was piss poor.

now nothing gets past 3-4 layers without either this issue or spaghetti and then the system pauses.

altered temps, layer heights ect

wits end with this thing. spent all day trying to get prints working today and nada.

edit; batch of middle fingers printed fine. next lot got 50% only thing i have not tried is removing the dessicant packs from the cfs lite. i know they are supposed to sit in their little area fine but i wonder if they are causing a small amount of resistance.

edit 2: shits still fucked. im about to throw this thing down my driveway.


r/Creality • • 1d ago

♻ K1 Help Holographic plates health care

2 Upvotes

Hi, i have a k1 with cfs, i just got a holographic plate and i want to make multicolor prints in the fist layer, what things i have to consider to not ruin the plate in a few prints? I just to have a normal A1 plate and a 3th party smooth plate but it got scratched but it was because i wont autolevel between prints, any other advices?


r/Creality • • 1d ago

♻ K1 Help Anormalidade de conexão no bico

1 Upvotes

Tenho uma Creality k1

Estive com esse problema de anormalidade de conexão no bico(BM0111) troquei o bico por um paralelo(pelas avaliações funcionava perfeitamente) porém o problema persistiu;

Pode ser problema na placa ?


r/Creality • • 1d ago

Show Off 🎄🐱Cute Christmas Cat Tree Ornament 🐱🎄

Thumbnail
gallery
2 Upvotes

Since we have a cat in the house, we have to have everything cat-related—even Christmas tree ornaments! That’s what my daughter said! And our cat, Kitt, really liked his ornament—or, well, the string, at least!!