r/Creality • • 21h ago

✅ Solved! What was that tyre pressure, again?

Thumbnail gallery
32 Upvotes

r/Creality • • 23h ago

Show Off Screw-on lids are surprisingly satisfying to print

Thumbnail
gallery
13 Upvotes

Designed these screw-top containers to keep small stuff organized instead of having it scattered around my desk.

They have a threaded lid with a ridged edge for a better grip, and the body and lid are printed separately, so you can mix and match colors.

Great for storing screws, small parts, or pretty much anything that needs its own little container. Really like how the two-color combinations turned out!

Creality Cloud -Screw Lid Container From fifindr https://www.crealitycloud.com/model-detail/screw-lid-container

Hope you like it!


r/Creality • • 16h ago

Show Off G-flex on K1C

Thumbnail
gallery
12 Upvotes

Just got my G-flex filament from Polymaker and wow!!!!


r/Creality • • 5h ago

Troubleshooting K1C, filament keeps getting bunched up in the extruder, have to open it up to clear. Any idea what's causing this?

Post image
6 Upvotes

I mostly just print with PLA, this happens with multiple brands including Creality. Nozzle is a Microswiss 0.4mm, using Creality software at stock settings for filament. I've had this trouble intermittently since I first started using the printer.

I replaced the extruder a couple weeks ago, printer has been perfect through multiple prints until last night when it plugged up again. I've been retracting/extruding filament between prints. Last night it was <5 minutes since the last print, so I didn't do this beforehand, I just noticed it wasn't printing any filament. It wouldn't retract or extrude, an on opening the extruder I found this again.

I plan on replacing the extruder again, this time with a DXC as an upgrade. But is there another cause I'm missing? Is this just common with the K1C?

Edit: lots of great suggestions, looks like heat is the biggest issue. I just wanted to say how much I appreciate the positive, helpful comments. It's a sign of a healthy community, something I've not always found on reddit or within the printing subs.


r/Creality • • 1h ago

Show Off Making movie nights a little more comfortable

Thumbnail
gallery
4 Upvotes

Designed this sofa tray so I can keep my drink and snacks right next to me without needing a coffee table.

It has a recessed cup holder to keep your glass in place and a larger tray area for a snack bowl or anything else you want within reach.

It's all printed as one piece, and I really like how the rounded shape turned out. Perfect for those evenings when you don't feel like leaving the couch!

Creality Cloud -Sofa Tray From fifindr https://www.crealitycloud.com/model-detail/couch-sofa-tray

Hope you like it!


r/Creality • • 1h ago

Show Off My dad requested a spiny lobster

Thumbnail
gallery
4 Upvotes

The clean up alone was a bloody nightmare. But the model was designed well and wasn't weak. So I got it all without breaking it.

I am not a painter by any means. I'm mostly happy with the result though.

I got the model here

https://www.myminifactory.com/object/3d-print-crabfish-lobster-378228

Dude did a great job on the design. It is really details and we'll designed


r/Creality • • 23h ago

Troubleshooting Creality Ender-3 V3 KE Upgrade: Could a Larger Fan Help Prevent Heat Creep?

Thumbnail
gallery
4 Upvotes

After dealing with repeated clogging issues with my Unicorn hotend, I'm preparing another upgrade for my Ender-3 V3 KE: replacing the original cooling fan with a larger 4010 24V fan.

My suspicion is that these recurring clogs may be related to Heat Creep, which occurs when heat travels too far up into the heatsink, causing the filament to soften before reaching the melting zone.

The goal of this upgrade is to improve heatsink cooling, keep the cold side of the hotend at a more stable temperature, and prevent premature filament softening.

But here's the question: Could upgrading to a larger 4010 24V fan actually help reduce heat creep on the Ender-3 V3 KE?

Has anyone tried this modification? Did you notice any improvement? I'd love to hear from people who have experienced similar issues!


r/Creality • • 15h ago

Troubleshooting Does anyone know the Pin out for the Creality HI Z axis switch?

Thumbnail
gallery
3 Upvotes

Hi peoples of Reddit. I just bought a stupid cheap Creality HI combo off of Marketplace.

If someone would be willing to take theirs apart to check i would be forever grateful. Thank you

It was listed that it needed some work done to it.

It appears it is missing the Z stop cable that goes up to the sensors on the top rail (both sensors are there and are connected.

I have a plug and someone attempted to fix it. Does anybody know the wiring diagram on the whole system? Top and bottom?

Or even a part number for it?

Second pic is what I found off Google of what it should look like.

Thank you all


r/Creality • • 21h ago

Hardware Help New Printer Calibrations

Thumbnail reddit.com
2 Upvotes

r/Creality • • 5h ago

♻ Filament Help K2 combo - recommended Filaments

1 Upvotes

Hey recently picked up a K2 Combo from Costco and it has been great so with the included hyper PLA. I would like to pick up some PETG and CF filaments.

I have access to microcenter, what would be a good filament to pick up, are there profiles available for other filaments besides Creality RFID?

I also only have the stock CFS, but considering picking up a dryer to work with PETG and other materials. Does everyone just leave the filament in the dryer until time to print and then put it in the CFS?

Appreciate any advice!


r/Creality • • 7h ago

Mods & Upgrades Is it worth it?

Thumbnail reddit.com
1 Upvotes

r/Creality • • 12h ago

♻ i7 Help Small holes on the edges

Post image
1 Upvotes

r/Creality • • 12h ago

♻ K2 Help Exhaust Air Filters Help

1 Upvotes

Hello, got a k2 Combo from the good old Costco(they have everything even Degrees!!)

Was looking into things while printing and I would like to get a magnetic solution for the exhaust ports to help filter the fumes. I am limited sadly in porting fumes to the outside. If any one has a name to a file if possible or links I would greatly appreciate the help. Most files I have found have been for the K2 Plus only sadly.

Any help would be appreciated and my 1st print was for 25mm bases to play with my war dollies :D