r/e39 • u/PlanetAtomiC • 7h ago
525i appreciation
r/e39 • u/ImprezaDrezza • Sep 10 '19
Please note everyone that the rules for r/e39 have been updated. I have clarified a few things related to discussion topics and acceptable conduct.
Most importantly I have added a section on listing For Sale style posts. [Some] other car subs allow this so I thought we could try it out. E39 fandom is a more closely knit group than other BMW subcultures and could stand to benefit from a dedicated venue for cars/parts/effort trading.
I want to be clear if this isn't a popular option, or if FS posts become routinely adversarial, we can adjust the rules on these posts or eliminate them entirely.
I welcome any comments on this change and the sub rules in general, and will continue to poll our community for changes or ideas on a regular basis.
r/e39 • u/yofuckreddit • Aug 21 '20
Hey guys! I figured I'd sticky this. I'll update the post if y'all have anything good to add or critique, let me know.
Introduction
Looking to buy an E39? First things first – the reputation of these cars is partially deserved and partially not.
We frequently get asked if new car owners should purchase an E39. I love E39s more than nearly anyone I know - I have a 525i and an M5, and both are incredible for different reasons. I've done many of the DIYs and addressed many of the problem areas listed here. If you aren't in a financially comfortable enough situation to have 3-6 months of expenses in a savings account at all times, you're not in a position to own a 20-year-old BMW hassle free. It's a question of financial safety and consistency rather than attainability - buying a $4k 530i and maintaining it for 5 years or so is arguably a much better deal than going into debt for a $40,000 CUV that drives like shit.
Evaluating a Car
There are a couple of things to factor into your evaluation of a car before we even talk about problem areas:
Prices & Purchasing
Market prices for these cars have fluctuated over the past couple years. There’s a noticeable difference between pre (<=2000) and post-facelift (2001+) models. Later models also may make adding an auxiliary port easier, have upgraded components, or have more standard features. Also keep in mind that sport packages for the 530 and 540, along with manual transmissions, command a significant premium as well. Prices on sports (530 or 540) and M5s have increased a bit since this guide was originally written a couple years ago. Finally, it's worth knowing that the 540's engine in pre-2000 configurations is slightly more reliable as it does not include VANOs.
Ballpark prices are based on a mix of my estimation and Classic.com, a great reference for car markets. Links included below, and assume cars aren't total shit shows:
When you check out ANY used car for purchase, you should be checking a variety of different things. Use a generalist guide to start. We’ll go through common failure points for the chassis and individual models for you to pay special attention to. Parts prices are for OEM or OE if I can find them, not genuine. Indy shop is a wild guess for the most part. Prices for doors or wheels are PER ITEM.
Conservatively plan to spend about $1k a year ON AVERAGE if you do a mix of shop work and DIY. Many years you'll get lucky and get to invest in an upgrade or something preventative if you wish. If you can find an example with new control arm bushings, window regulators, and Timing Chain Guides for 540s, you can save yourself a ton of heartache and just deal with replacing BS plastic parts as they snap.
General Problem Areas
| Problem Area | Cause | Symptoms | DIY (Parts) | Indie Shop |
|---|---|---|---|---|
| Window Regulators | Garbage BMW Design | Windows that do not roll up or down, or slip. Test all 4 windows, including both the localized controls for each door and the driver’s door controls | $100, 2 hours. Text DIY Youtube DIY | $500 |
| Vapor Barriers | Butyl tape that adheres the sound deadening/vapor barrier foam degrades over time, requiring at least the reapplication of the tape OR new adhesive OR a whole new door panel. | Soaked rear floorboards after rain. Softness in bottom of door panels. Test by pouring water on the roof of the car. After a moment, open the door. Ensure water drips from the bottom of the chassis, not from the door. | $0-$15-$115, 2 hours. | $500 |
| Rust | There's a couple very poor drainage points on the E39, including those connected to vapor barriers as above | Common spots include rear door, bumper seam, gas cap. Check out /u/richbltn 's buying guide Here for common rust spots (whole video is worth a watch) | Repairing rust is an odious task, especially externally visible spots. | reputable body shops generally cost $1500 + to fix a collection of rust spots |
| Front Control Arm Bushings | Rubber joints between suspension components degrade over time. These are the secret to a simultaneously pliable and firm chassis. Consider with Polyurethane for a stiffer ride but permanent fix, or a monoball setup. | Violent shuddering during braking (generally 70% braking force). Test with a variety of braking amounts and speeds. Check the bushings by jacking up the car and ensure they aren’t cracked | $25, 6 hours. May require special tools or replacement of control arms if damaged. | $600 |
| VANOS | Tiny seals in BMW’s variable valve timing system (probably too overengineered) are made of cheap rubber that plasticizes with exposure to oil and heat, something that happens every day. | Excessive oil consumption, laggy shifting in automatic models, whooshing sound from the engine, sudden drops in power delivery. | $25-$500, 12 hours Do NOT use OEM VANOS seals, as they will eventually have the same problem. Aftermarket seals are the same price and far superior. Besian Systems/DR VANOS. | $1200-$5500 (Depends on new vs rebuilt VANOS, and varies from model to model) |
| Valve Cover Gasket | The rubber between the top and bottom of the valve cover is a part that has to be replaced on every car. | An old VCG will start leaking oil slowly. You may smell it as it burns off inside the car. Eventually you’ll have a catastrophic failure and need to degrease the engine bay and have it towed somewhere. Test by checking for oil spots or moisture between the top and bottom of the valve cover (the main part of the engine). | $50, 5 hours. | $750-$1250 (DO THIS THE SAME TIME AS A VANOS REPLACEMENT) |
| Seat Twist | Garbage BMW design. The seats use 2 motors that don’t stay aligned, and cables that slowly slip out of the gears that drive them. | One side of a seat will adjust, the other will not, leading to the seat twisting. | $0, 3 hours | $300 |
| Headlight Adjusters | Bad design and extremely brittle plastic in a hot area that's been there for 20 years. | Frequently this manifests itself by your headlights pointing at the ground. | $20-60, 3 hours from this DIY. You can get aluminum or plastic adjuster replacements. | N/A - you'd buy new headlights for around $300+ |
| Dead Pixels | Contacts for the LCDs on the instrument cluster and the head unit eventually decay. You can take them apart and clean/rebuild them or buy new. For my money I'd just replace the head unit at least | Unreadable displays with clearly missing pixels - you can't miss this one and it's very common | $0, a huge PITA, DIY. | Specialty shops will do it for $150 or so. A remanufactured cluster is $450. |
| Secondary Air System | The secondary air recirculates exhaust gases back into the engine to “Save the planet” and also annoy the fuck out of BMW owners. Broken vacuum tubes, stuck check valve, or ruined solenoids can all cause these issues. | Check engine light with lean fuel mixture fault codes. Chugging during startup. | $25-125, god knows how long. BAVAuto has an EXCELLENT tutorial on diagnosing SAS problems. Another option that I'd probably only suggest to M5 owners is using a tune that deletes these codes. | $300+ |
| Cooling System | This covers a host of issues: Water Pump Failure, Cracked Radiator necks, Plasticized and worn coolant tubes | Inspect all cooling system parts. Check the radiator fan to ensure that it turns smoothly and isn’t too brittle. Lightly squeeze coolant tubes to ensure they’re still pliable. Check for evidence of coolant leaks at tube and component points, or from bleeder valves at the top of the radiator. Ensure that even under stress, engine sounds don’t change and temperature doesn’t rise (within reason) | $25-$750. 2-5 hours. | $1250+ |
| Fucking Horrible Audio | Everything about the E39 sound system is god awful | If it’s OEM it sucks | There are various aftermarket nav systems that still provide an OEM look and a ton of functionality for around $700. Or you can go your own way and buy a $100 head unit or something. Keep in mind that in general this will degrade the value of your car if it’s really clean. | $? |
| ABS System Malfunctions | The ABS system’s position in i6 models is extremely hot, leading to the soldering of certain electronic components degrading. | ABS, Traction control, and yellow brake light come on intermittently. ABS engine codes. Do not pay someone to replace this, it literally just takes a T20 screwdriver. | $100 reconditioned, $1000 new. | $1200 |
| Power Steering Leaks | The power steering system uses rubber hoses right next to a really hot engine | Power Steering hoses appear to “Glisten”. Wet spot in plastic pan at the bottom of the engine bay. Loose or unresponsive steering wheel response. | $200, 2 hours. | $500 |
V8 Only Problems (540i, M5)
| Problem Area | Cause | Symptoms | DIY (Parts) | Indie Shop |
|---|---|---|---|---|
| Timing Chain Guides | Timing chain gets a little loose, Timing chain guides are plastic. This is much more common on the 540 for some weird reason (probably that it's a single-row chain). | Slapping sound, camshaft position codes, metal shavings in engine. | $1000, 20 hours | $4000 |
Buying Parts
When you're looking to buy new parts, it can get a bit confusing (to put it lightly). For an accurate, if slightly biased, interpretation, the best info is probably here at FCP Euro (a generally reputable parts seller). TL;DR:
OEM is very similar to OE in that it stands for Original Equipment Manufacturer. While that sounds like a lesson in semantics, there are some distinct differences. Chiefly, OEM parts are made by a company that makes original parts for a vehicle maker but whose parts weren’t originally fitted. Confused? I don’t blame you, so here’s an example: Delphi makes ignition coils for BMW, and they’re installed on the vehicles at the factory. Bosch makes spark plugs for BMW and the licensing to produce the same ignition coils as Delphi. They’re the same part with the same specifications and made with the same materials, but the manufacturer is different. Delphi is the OE part because that’s what BMW used at the factory, and Bosch is OEM because they make other OE parts for BMW.
Modifications and Upgrades
For better or for worse, the BMW community has enjoyed a rich modification culture and ecosystem. This often clashes with the tastes and opinions of older enthusiasts who have or can buy cars new.
One key takeaway: Tuning an i6 from this era, especially anything under 3.0 liters, is always far more expensive than buying a new car or engine. This forum gets questions around these options regularly. To do this, you will have to be in a rare position of having a lot of money and time to work on the car, without wanting the straightforward power of the V8 engines in the 540 or M5.
Some general thoughts around available upgrade options to keep in mind:
r/e39 • u/Fearless_Lobster_858 • 9h ago
I had an engine swap done, I had a 520D and the engine and other components were taken from a 530D Touring, and I’ve noticed that the reverse lights don’t work.
Here’s what I’ve checked so far.
-fuses
-bulbs
-transmission switch
I’ve heard that the wiring on the touring is different from the sedan, and that whoever did the swap didn’t take that into consideration when wiring it.
Any ideas?
r/e39 • u/Skodakenner • 7h ago
Front jacking point is done for. But it will get welded again im far too deep into it now.
r/e39 • u/GeologistFunny5015 • 3h ago
Hey everyone!
I have a 2001 BMW E39 525d, and I’m dealing with a pretty serious coolant leak.
The car loses around 1 litre of coolant overnight.
Winter is just around the corner, and temperatures are starting to drop below freezing.
I have to drive the car to work early every morning, so leaving it parked isn’t exactly an easy option.
I currently have about 1 litre(around 1qt) of spare coolant left, but obviously that’s not going to last forever at this rate.
As you can see in the video, the coolant is dripping directly onto the belt and then running off the belt onto the ground.
What would be the smartest decision in this situation? Would you keep topping it up and drive carefully until the leak can be fixed, or stop driving it altogether?
Could the leak be coming from somewhere above the belt? Has anyone experienced something similar on their E39 M57?
Any advice or suggestions would be greatly appreciated!
Greetings! I’m working on replacing my ribbon cable and LCD screen. My pixelfix repair kit came with this little foam strip but I’m not sure what to do with it. Anyone done this repair before that can shed the light? They have a little video but it doesn’t show this strip being used.
TIA!

Pic for attention.
My early M52 528i was stalling at idle and running pretty rough. I found several issues like a poorly adapted crank sensor, a couple of vacuum leaks and I replaced a lot of parts like plugs, fuel filter, ICV grommet, etc. and it's running a lot better, but one issue persists:
There is a 202 code (Lambda Regulation Bank 1 Post Cat) which points to fuel trims reaching the limits but only in bank 1. I can still hear faint popping from the exhaust so it's clear the code is right.
How can I be getting mixture problems in just one bank? I've yet to replace the pre-cat O2 sensors but they're $200 each. Most people who report mixture codes naturally see two codes, one for each bank.
I'm out of fresh ideas. Should I just keep throwing money at the problem and get the O2 sensors?
r/e39 • u/CarefulLocksmith8349 • 1h ago
i made a post yesterday about some fault codes that are causing me to fail smog, one of which is P0741 (torque converter clutch circuit performance/stuck off). there is no noticeable slipping and the manual shifts work fine 1-5. either way i figure i probably need to get the torque converter changed. right now im looking at this remanufactured TC on ebay and labor in mexico a friend of a friend quoted me around 3000 pesos (160ish usd).
for anyone who’s had this problem before i have two questions:
r/e39 • u/Theowolter • 1d ago
I developed a retrofitting kit for the illuminated door handles, relatively easy to install and oem looking. DM if you are interested
r/e39 • u/stuartjr1980 • 1d ago
My headlights stay on even when the switch is powered in the off position. Also, my speedometer is intermittent as a relate to working.
What could these issues be?
Put this together today after hearing all the horror stories about these Bosch ABS modules cooking themselves in the engine bay.
For anyone who’s been running a similar setup for a while: does a heat shield actually make a noticeable difference in keeping them alive, or is it mostly just peace of mind before the internal bond wires eventually give out anyway?
r/e39 • u/TTVAccuse1x • 18h ago
I found a 98 540. I don’t know if it’s the same color but I can get the hood the fender and the radiator support for 250. Should I do it and is it the same color? Someone tell me I said about 95% cosmetic. The only part of the frame has been is the fender got pushed in a little bit and so that part of the frame got pushed in I could take a heat gun to it. What should I do?
r/e39 • u/Difficult_Push358 • 11h ago
2003 530i occasionally my ac and heat wont shut off when i remove the keys from the ignition, anyone else experience and know how to deal with this? ive had to disconnect my battery for it to shut off.
r/e39 • u/CarefulLocksmith8349 • 23h ago
Im trying to get my car to pass smog but it failed due to 3 codes:
-P0741 (torque converter clutch circut performance/stuck off)
-P1112 engine coolant temp sensor high output
-P1512 DISA or intake manifold
i need help figuring out how to fix the first and last codes. i have another radiator temp sensor so hopefully that clears the second code. does anyone have experience with these or know what i need to replace?
r/e39 • u/Cesartoharto • 1d ago
Se que los motores diésel no son para todo el mundo, pero quería mostrar mi trabajo en la gestión térmica de mi m57d30 de mi e39 que estoy restaurando con 160.000km. Siempre pensé que la posición del filtro de aire estaba demasiado expuesta al calor del turbo/escape. Y ahora con las piezas fuera del coche me dió por probar.
Se trata de una primera capa autoadhesiva de cerámica mas o menos 4mm envuelta en una capa fina de inoxidable soldada por puntos.
Teóricamente este sistema conserva internamente el calor de la combustión manteniendo los gases de escape más calientes, por ende conservando mayor energía cinética, moviendo el turbo con mayor facilidad y evacuando mejor.
Esto yo no puedo demostrarlo, pero creo que por probar que no quede. Al menos, aisla del calor al modulo ABS mejor.
r/e39 • u/Russianseth • 1d ago
Just made a new E39 discord server to help with any trouble shooting you guys have or for buying and selling parts the name is Worldwide E39 and the code is https://discord.gg/jUx7wCwf5 (any help making the server would be much appreciated as well!)
r/e39 • u/Grokaine • 2d ago
r/e39 • u/DearAdvertising2692 • 1d ago
I have this horrible squeak... it's tied to wheel speed, goes away when I lightly press the brake. Started happening after I replaced the rear brakes.
Zimmerman Z-coat rotors, akebono pads. I'm not sure what to do about it. It's very loud and obnoxious.
Caliper is new, brake hoses are good, caliper bracket is new. What else could it be? Thanks..
r/e39 • u/e39hamann • 2d ago
Had to get in some driving before winter hits and the roads are covered in salt. I need to move south one of these days 😂
r/e39 • u/narwhale3210821 • 2d ago
E39 528i 5 speed.
We up!
Lmk any good resources to look for mods and parts.
r/e39 • u/kevinsideofme • 2d ago


Hey everyone,
I'm looking at a 2002 540i Touring just north of $15k with a 6-speed manual from an M5 and wanted to get some opinions from people who know these cars better than I do.
I've seen some pictures of the records, and there's seemingly a decent amount of history behind the car, and its well taken care of, and major maintenance has been taken care of too.
I'm not afraid of DIY maintenance or getting my hands dirty. I understand these are 20+ year-old BMWs and that ownership isn't going to be entirely trouble-free.
For those of you who have owned these cars, particularly the M62TU 540i:
And ultimately, does a well-maintained example like this still make sense to buy, or am I romanticizing the E39 a little too much?
Appreciate any input. I'd rather hear the honest experiences, good and bad, from people who actually own these things.
r/e39 • u/quanle1512 • 2d ago

Trans is an auto GM 4L30E! Doesn't seem to be any plug for it but never seen this before.
https://www.realoem.com/bmw/enUS/showparts?id=DP63-USA-06-1999-E39-BMW-528i&diagId=11_7518
r/e39 • u/RGuerra775 • 3d ago
Hey everyone, I’m at my wit's end with my 1998 E39 530d (M57, 184hp, manual) and I really need some advice before I throw more money at it.
The Original Problem:
The car had violent vibrations, bucking/jerking, and metallic clacking sounds, especially around 2,000 RPM (right around when the turbo spools/under load).
The car already has:
• Brand new Dual-Mass Flywheel (DMF) and clutch.
• New shock absorbers.
• Wheels are brand new and completely straight.
• I haven't replaced the engine/transmission mounts yet—I have the new parts ready to install next week—but the current ones aren't completely destroyed).
• Previous owner said he checked the injectors, but I might get a check on them.
What I just did (thought it was the pulley):
I inspected the crankshaft pulley (harmonic balancer) and saw that the vulcanized rubber was visibly torn. I was 100% sure this was the root cause, so I bought a brand new harmonic balancer, tensioners/idlers, and belts.
I had a local mechanic (a good Mercedes specialist, since I don't have a reliable BMW indie nearby) install everything.
The Current Situation (Much Worse):
Right after picking the car up, it is completely undriveable.
It’s now making loud metallic CLACK noises even at 1,000 RPM.
Looking at the engine bay while it runs, the new pulley seems to be wobbling/shaking a lot.
Every time it makes the loud clacking sound, the engine (especially the air filter box side) jumps violently.
Diagnostics & Mechanic's Opinion:
The mechanic told me he thinks it’s an injector or fuel pump issue when the turbo spools and suggested taking it to a diesel injection specialist.
However, the last time I checked with INPA, the injector correction values at idle looked fine(-0.3,0.4,-0.2 etc..)
I did previously have a Crankshaft Position Sensor fault code stored in INPA but now idk why my INPA stopped working a few months ago.
My Questions:
Any help is massively appreciated!