r/Gunpla • u/CursedBlacksmith • 2h ago
Question post
What color should I paint the body camera on the Entry grade Nu Gundam?
r/Gunpla • u/CursedBlacksmith • 2h ago
What color should I paint the body camera on the Entry grade Nu Gundam?
r/Gunpla • u/OriollePennrose • 12h ago
These help so much in organizing and identifying the runners and it is also quite satisfying to place the pieces back into the storage box once you are done with that runner.
Think you can find the item in AliExpress. I also bought 2 set of organiser so that I can have 2 of each alphabets
r/Gunpla • u/Adventurous-Pen-2142 • 7h ago
r/Gunpla • u/Skyaspir • 16h ago
And this fuckup is entirely on me. This time it wasn't a defective part like in the other two cases.
I got a little too carried away with the build and stayed up until 2 AM. Somehow, I completely failed to notice that I hadn't installed part D-11 on one of the legs.
The funny thing is, I clearly remember the part still being attached to the runner. Several parts were marked as unused in the instructions, so I just assumed D-11 was one of them.
After I finish a build, I usually sort the runners: I cut off the sections with unused parts and put them in a separate little box, just in case I need them for some future experiments. Everything else goes into another box — the one destined for the trash.
I discovered my mistake the next day after work, when I tried posing the model and the leg suddenly split into two pieces.
I took a closer look, remembered the "extra" part, and went straight for the box where I was absolutely certain I'd put it.
It wasn't there.
And then it hit me.
I'd somehow put it in the trash box instead. And, of course, I'd already thrown that box away that morning on my way to work.
At that point I was desperate enough to actually go check the trash container. Naturally, it had already been emptied.
But apparently one fuckup wasn't enough.
When I opened the beam saber compartment, the cover sprang back and popped off its mount. The beam saber itself went flying somewhere. I heard it hit the wall, so at least I knew it hadn't just vanished into another dimension.
I still haven't found it.
So yeah. One part went into the trash, another one disappeared somewhere on my desk, and I managed to do both of these things to the same kit.
Beguir-Beu Torche: 1
Me: 0
P.S. I'll try to find replacement parts on AliExpress.
r/Gunpla • u/SpecialAttitude4746 • 6h ago
WHY IS MY BROKEN ENTRY GRADE RX-78-2 FUCKING AURA FARMING
r/Gunpla • u/Suitable-Frame-1005 • 18h ago
I used grey primer, ak 3g royal purple and vallejo lemon yellow so far.
I made the mistake of using grey primer for yellow paint, it has been difficult to cover fully and I just got tired and left it for now.
I plan on using a dark green for the rest.
r/Gunpla • u/sixsixmajin • 17h ago
Picked this kit up just to crack it out in an evening. No goals. No ambitions. Just wanted to scratch an itch of knocking a cheap kit out. Nothing extra besides seam removal and panel lining and I used the stickers just because I wanted to see what a sticker only build actually looked like. They're better than I expected only in the sense that they pass a 5 foot test but closer than that, they look as bad as you'd expect them to. They were also just zero fun to apply. Some stuck good and firm, some only wanted to slide around. Some actually conformed surprisingly well to the grooves and crevasses to actually look surprisingly natural (the permet stickers and the backpack vents were the best in these regards), some just refused to conform or conforming them resulted in them no longer lining up correctly so they looked wrong. Then some were just absurd at face value like the sword hilts in how they were just a giant sticker you were supposed to wrap around the whole piece.
Honestly, I think painting to color correct would have genuinely been easier lol. I'll give them credit for the effort because of how much work those stickers need to put in and I don't begrudge the kit itself but now that my curiosity has been satiated, I'm never doing this again. The SD standard kits are kinda fun for what they are and maybe I'll pick up another here and there for a cheap thrill but oof. I am never using a color correcting sticker again.
r/Gunpla • u/BigForAnAnt_985 • 12h ago
r/Gunpla • u/Scooobaruu • 10h ago
Hi all!
I've built models since I was kid, life happened, now I have adult money!
I started to get into Warhammer 40k, but to be fair, there was SOOO much to do before you could even play.
I know that this isn't a game sub or anything like that. What I'm wondering is how much of money and time sink is this?
I've read some things and watched some videos. It looks like these are good to honest models. Most if not all are snap together for the most part. If you are the artsy type you can customize the looks of some of them (scrolled around here, jealous of the talent here!).
Where to start?
I have my own space to build them in, can't really do any airbrushing.
I like the looks of the models.
The shows are really good. Started all the way back with the OG show from the 70s just so I have context.
I believe that doing things like models and such help keep your dexterity up and your mind sharp.
I live in the DFW (Alliance) area, so shops to go to, and shops to avoid would be nice too!
*Photo is from
https://geektogeekmedia.com/geekery/guides/what-is-gunpla-beginners-guide-to-gundam-model-kits/
used it to meet posting requirements.
r/Gunpla • u/LilTicTac10275 • 6h ago
Spent the better part of 3 weeks, building my RX-78-2 2.0 and while posing him for the first time, the left leg sheared off and trying to fix that in panic led to me breaking G28 and G30. I feel horrible.
r/Gunpla • u/Any-Philosopher3585 • 4h ago
My expectations were met, worth za muney
r/Gunpla • u/ReplyMany7344 • 5h ago
After I’m pretty sure 8+ hours of JUST CLIPPING. I have finished clipping every part of the PGU Nu Gundam.
My question for those who painted theirs - did you strip and repaint the gold parts? If you did or did not, do you regret it?
I tested trying to strip two small gold parts… and it seems like a real pain to strip it properly (it has two layers).
r/Gunpla • u/Alright_doityourway • 9h ago
Chang Long Nu Gundam FF rg upscaled
It's amazing how bigger size enhanced the coolness factor so much
The good:
- Nice build, no loose part, some part might be a little too tight but not bad
- They replaced all of the original stickers with waterslide decals, much better
- Very stable, it's can pose and stand just fine.
- Came with free stand
The bad:
- They're also metallic silver stickers with gray decal, and those are crappies
- some waterslide decals are fragile
- The manual has multiple errors and mislabeled
Ps. I don't know if I wad mistaken, but I think they modified the face to be slightly long. I might be wrong tho.
r/Gunpla • u/fahsiao • 20h ago
Just wrapped up my first MG and I'm hooked. Can already tell I'm going deep on this hobby.
One thing I didn't expect was how many extra pieces there are. I did some digging but there doesn't seem to be a standard way people store them.
I thought about cutting everything off the runners, but then if something on my build ever breaks, it'd be a pain to track down the right spare. Right now I'm keeping them on labeled partial runners, which feels the most organized, but I can see that getting bulky fast once I've got more kits under my belt.
For the more experienced builders:
-What's your system? Photos would be awesome
-Does it even matter long term? How often do you actually dig into your spares?
-Do you mix extras across kits? I'm picturing a master bin for all the hands, heads, etc.
Thanks yal! Loving the hobby and stoked to be part of the community.
r/Gunpla • u/BullshitBlazing420 • 23h ago
Bandai you bitchhhhhhhh, make RG kampfer you cowards!!!!
r/Gunpla • u/Full_March_476 • 10h ago
It always frustrated me a little bit with how the front skirt piece was just that, a singular part, which made the pose I had Gramps in look really jank.
I after a little bit of research, I found out that it's not only possible to split parts like this, but that a few people have already done it before!
All I had to do was take an exacto knife to the thin bar that connects the two sides of the skirt. I didn't even sand it, because I both don't have sandpaper or a file, and I wanted to make sure the fit was still tight. Well, that's that.
I don't know why I haven't done this sooner! 😅
Fortunately none of my other kits have this problem, but I'll keep this tip in mind in case I encounter it again. ^^
r/Gunpla • u/Glum_Shoulder6751 • 6h ago
Custom amuro’s unicorn gundam! How should I improve my next one?
r/Gunpla • u/N01In_Particular • 15h ago
r/Gunpla • u/The_Sum_of_Zero • 11h ago
r/Gunpla • u/AranaesReddit • 14h ago
r/Gunpla • u/vektonaut • 14h ago
/u/zechysclaus has left me speechelss with the generosity and creativity of gifts this year. The kits alone hit it out of the park: Wing Zero ver Ka, MG Qant, MGSD Barbatos, RG Shining and the SD F-Kunoichi Kai. But what really set this apart were the additional gifts handmade from their spouse and kids. First, we have a homemade framed print of the Moon Gundam, a crocheted Haro, a perler bead Haro ornament, and a massive perler God gundam! I'll be decorating my workspace with these gifts so i can cherish them whenever I build. On top of that, a few keepsakes from their trip to Japan were also included! /u/zechysclaus i hope you have an amazing holiday season, you and your family deserve it! Also, last pic is shopping box cat tax.