r/Gunpla • u/Prudent_Music_8698 • 23h ago
BUILD RG Wing Zero (finished)
I'm finally done it and made some photos with base. And I'll rate this like best kit, that I've done in 2026.
r/Gunpla • u/Prudent_Music_8698 • 23h ago
I'm finally done it and made some photos with base. And I'll rate this like best kit, that I've done in 2026.
r/Gunpla
•
u/WillingArachnid7538
•
23h ago
r/Gunpla • u/ReVindz • 10h ago
What a build, i enjoy every last bit of it lol. But my main gripes are the metallic injection part and the sticker being a non wsd 😭
But when all said and done, this is the best gundam I've built so far.
r/Gunpla • u/Boring-Direction-465 • 18h ago
Custom RG Tallgeese
r/Gunpla • u/Comfortable-Lemon-86 • 5h ago
I recently got back into Gunpla and was searching for the MG Providence to add for my 2027 backlog and came across a used MG Ex Strike Freedom for ¥10,000. I didn’t have plans to get the kit originally but it was a bargain find so I just had to scoop it up.
It was immaculate and came with all parts, even with the manual, which is pretty rare for used kits.
Suffice to say, I walked out with a little more than I initially thought.
r/Gunpla • u/Anxious-Reserve3804 • 4h ago
My obsession with motorsport has spilled over into my hobbies 🥹
r/Gunpla • u/Full_March_476 • 10h ago
It always frustrated me a little bit with how the front skirt piece was just that, a singular part, which made the pose I had Gramps in look really jank.
I after a little bit of research, I found out that it's not only possible to split parts like this, but that a few people have already done it before!
All I had to do was take an exacto knife to the thin bar that connects the two sides of the skirt. I didn't even sand it, because I both don't have sandpaper or a file, and I wanted to make sure the fit was still tight. Well, that's that.
I don't know why I haven't done this sooner! 😅
Fortunately none of my other kits have this problem, but I'll keep this tip in mind in case I encounter it again. ^^
r/Gunpla • u/AnneMarie_9 • 19h ago
yes i painted the details using only gundam marker
did i spend way too long on every tiny greeble
yes
will i ever do this again for a HG
no
maybe
depends
r/Gunpla • u/__phaced • 23h ago
What a beautiful kit! I have plans to paint another one but I figured a "straight" build was necessary to showcase the engineering and aesthetic achievement that is this model kit!!
r/Gunpla • u/Hungry_Fold6409 • 22h ago
This is my scratch-built MS-39 Saku, completed in August 2021. It all started as a joke in my local modelers' club. A friend mentioned that the "Saku" was the one kit he personally wished existed as a plastic model. Since I'm only into building Gunpla kits and haven't really watched the Gundam anime, I asked what a Saku was. After hearing the explanation and looking it up, I thought, "Hey, I could probably make this myself!"
With the simple mindset of "Well, I'll just build it then," I searched for suitable materials. Being Korean, I spotted a diet supplement pill bottle that was trendy in Korea at the time and immediately thought, "THIS IS IT!!!"
I got my hands on that pill bottle, sanded off all the printed branding on the surface, carved out the eye section with a rotary grinder, and sanded it smooth. Then, I built the inner skeleton out of wire and started painting. For the base color, I hand-painted it with Mr. Color (Gunze) Lacquer Italian Red, and painted the eye area with a Gundam Marker Black.
After the painting was done, I wired LEDs into both hands and the eye. For the arms and legs, I slipped Gunpla metal energy pipes and springs over the wire frame. The clear parts on the fingertips were made using spare joint parts from a clear Action Base. I wrapped metallic red tape around them to control the direction of the light, and modified spare HG beam saber parts for the beam effects.
For the power supply, I combined an Action Base with a battery case, attached a thick drinking straw to the base's support arm to run the wires through, and wrapped it in black electrical tape to hide everything. Because that damn pill bottle was so insanely hard to work with, I was completely exhausted and didn't have the energy left to fancy up the base. For decals, I used leftovers I had saved up from previous Gunpla builds.
Originally, the Saku has a mono-eye, but it looked way too plain when the LED was turned off. So, with a bit of personal flair (?), I added emoticon-like eyes instead (lol).
The scarf is my own custom touch—since the base material was a pill bottle, the seam line didn't look very good, so I cut up some black non-woven fabric and wrapped it around. And finally, the "TOKYO HOT" armband on its forearm is just a little joke of mine (hahahaha).
Please be gentle with my humble skills!
P.S. For anyone who doesn't know what a Saku is, here is a brief introduction translated from a Korean wiki:
r/Gunpla • u/vektonaut • 14h ago
/u/zechysclaus has left me speechelss with the generosity and creativity of gifts this year. The kits alone hit it out of the park: Wing Zero ver Ka, MG Qant, MGSD Barbatos, RG Shining and the SD F-Kunoichi Kai. But what really set this apart were the additional gifts handmade from their spouse and kids. First, we have a homemade framed print of the Moon Gundam, a crocheted Haro, a perler bead Haro ornament, and a massive perler God gundam! I'll be decorating my workspace with these gifts so i can cherish them whenever I build. On top of that, a few keepsakes from their trip to Japan were also included! /u/zechysclaus i hope you have an amazing holiday season, you and your family deserve it! Also, last pic is shopping box cat tax.
r/Gunpla • u/criley107 • 19h ago
I am absolutely floored by the generosity and kindness of our members. I’ll admit I didn’t give my SS much to go off of other than I like Wing and Seed and they delivered big time. Shout out to u/cabbageboy78. Can’t wait to build these.
r/Gunpla • u/fly_cucho • 13h ago
The Gundam Base Store, I had a blast! They just opened on October 30th, I had no idea!
r/Gunpla • u/AcheronRed • 18h ago
What an incredible selection here. The SNAA kits are great builds, I looking forward to finally building DA BALL, and I’m really eager to see what the MGSD line is like. This’ll keep me busy for a while!
r/Gunpla • u/N01In_Particular • 15h ago
r/Gunpla • u/Southern-Document-86 • 13h ago
The RE/100 version is on the right.
My previously customized HG version is in the middle, and the original HG straight build is on the left.
I've always loved the chunky, beefy proportions of the RE/100 version. When I customized the HG kit, I actually used the RE/100 as a reference for its overall proportions.
I thickened the torso, made the arms even bulkier than those on the RE/100, and widened the thighs. I also reshaped the lower legs around the knees. For the head, I shortened the snout and lowered the helmet brim. Finally, I completely scratch-built a new, oversized backpack inspired by the RE/100 design.
My only complaint about the RE/100 is that the arm-to-torso connections are extremely loose.
r/Gunpla • u/TenchiTora • 2h ago
Thank you u/DarkCenturionKnight ! I love all of it! This'll be my first Ver Ka kit and am excited for it to be the chunkiest boy. You also must have had mind reading powers, cause even tho I didn't mention armored core I was actually looking at and considering getting an armored core kit recently to try, so this'll be a first as well. Currently floors are being redone in my room so had to put building on hold, but I definitely know what I am building first!
r/Gunpla • u/Due-Pomegranate8636 • 16h ago
Such a lovely set of kits; really lacking on IBO rep in my collection so can't wait to get started on the Ryusei-Go too!!
r/Gunpla • u/The_Sum_of_Zero • 11h ago
r/Gunpla • u/Alright_doityourway • 9h ago
Chang Long Nu Gundam FF rg upscaled
It's amazing how bigger size enhanced the coolness factor so much
The good:
- Nice build, no loose part, some part might be a little too tight but not bad
- They replaced all of the original stickers with waterslide decals, much better
- Very stable, it's can pose and stand just fine.
- Came with free stand
The bad:
- They're also metallic silver stickers with gray decal, and those are crappies
- some waterslide decals are fragile
- The manual has multiple errors and mislabeled
Ps. I don't know if I wad mistaken, but I think they modified the face to be slightly long. I might be wrong tho.