r/Gunpla • • 4h ago

BUILD Manifesting more Gundam X kits for the anniversary with this build šŸ™ MG Gundam X custom!

Thumbnail
gallery
429 Upvotes

There’s been rumours of an RG Gundam X forever… let’s get it!

I took a few liberties with some of the colours on this build - I do like how the purple effects parts turned out!

For a slightly older kit it still holds up!


r/Gunpla • • 1h ago

MG Red Astray Photography

Thumbnail
gallery
212 Upvotes

What do you think? I tried some photography!


r/Gunpla • • 3h ago

BUILD Thank You, Peter Cullen

Thumbnail
gallery
234 Upvotes

I’m very late to the Peter Cullen tribute because I’m slow and life is hectic, but still wanted to post this (obviously I DO NOT expect to be included in the compilation as late as I am). Like much of you all he was a HUGE part of my childhood and inspiration for a lot of my creativity.

The build is taken from a Powered GM HG, which I got for free and wasn’t going to build until this subs request for a Peter Cullen tribute. It seemed bulky enough to fill out Primes proportions, but the more I looked at it the more I wanted to fix the head and gun because it would’ve thrown off the look a lot.

For the head I had a spare head for the RX-78-2 Revive HG’s head, so to make the faceplate fit I sanded the front down and cut off the bottom and it’s perfectly held in place by the tension of the helmet. I cut off the inner forehead thingy of the original and shoved it in the helmet to fill in the forehead hole. I also cut the V in two from the 78-2 and sanded down the edges and cemented them to the sides of the helmet.

For the gun, it was my first time doing that many mods (and I’m really proud of it!) I cut/scribed the barrel off the the bazooka and cemented it to the front of the rifle. I was gonna leave it like that at first to get the hand canon look, but decided to scribe off the tip to shorten it, messily scribed the middle of the barrel and sanded it to get some detail, and then scribed/cut off the stock and top of the gun, replacing the top with pla plates to give it definition and the stock with the very end of the butt. Additionally I took the handle from the bazooka + the original rifle barrel cemented them in front of the trigger.

Very happy with how it turned out. Hope I did the man proud.


r/Gunpla • • 6h ago

Brush painted SD Zaku

Thumbnail
gallery
221 Upvotes

r/Gunpla • • 9h ago

CUSTOMIZING Racing like GYANšŸ€

Thumbnail
gallery
283 Upvotes

My obsession with motorsport has spilled over into my hobbies 🄹


r/Gunpla • • 10h ago

MG Ex Strike Freedom Surprise Find

Post image
451 Upvotes

I recently got back into Gunpla and was searching for the MG Providence to add for my 2027 backlog and came across a used MG Ex Strike Freedom for Ā„10,000. I didn’t have plans to get the kit originally but it was a bargain find so I just had to scoop it up.

It was immaculate and came with all parts, even with the manual, which is pretty rare for used kits.

Suffice to say, I walked out with a little more than I initially thought.


r/Gunpla • • 5h ago

BUILD Gundam Rose crossing The Alps

Thumbnail
gallery
113 Upvotes

Gundam Rose from Gundam Fighter G (3rd party version) riding Fuunsaiki (from the Master Gundam & Fuunsaiki HG kit). Figured since the pilot George De Sand represents Neo France, I'd pose him in the most French way I could.


r/Gunpla • • 3h ago

SECRET SANTA 2026 Reinforcements have arrived 😁

Thumbnail
gallery
61 Upvotes

Huge thank you to my Gunpla Santa! Can't wait to start snipping and building—happy holidays u/ChaoticArsonist !


r/Gunpla • • 7h ago

SECRET SANTA 2026 Huge thank you to u/DarkCenturionKnight for dropping this absolutely unit on my door step!!!

Post image
112 Upvotes

Thank you u/DarkCenturionKnight ! I love all of it! This'll be my first Ver Ka kit and am excited for it to be the chunkiest boy. You also must have had mind reading powers, cause even tho I didn't mention armored core I was actually looking at and considering getting an armored core kit recently to try, so this'll be a first as well. Currently floors are being redone in my room so had to put building on hold, but I definitely know what I am building first!


r/Gunpla • • 4h ago

SECRET SANTA 2026 Forget the colony drop. u/setters2 dropped axis on me!

Post image
66 Upvotes

Thank you so much u/setters2 for these amazing gifts! The Gundam TCG starter decks were the cherry on top and my wife was super interested in them too! Merry Christmas and Gunplamas to you!!


r/Gunpla • • 15h ago

BUILD RG HI NU

Thumbnail
gallery
442 Upvotes

What a build, i enjoy every last bit of it lol. But my main gripes are the metallic injection part and the sticker being a non wsd 😭

But when all said and done, this is the best gundam I've built so far.


r/Gunpla • • 4h ago

BUILD 26-year-old Gundam Airmaster found from my box of scraps

Thumbnail
gallery
52 Upvotes

Slowly updating my Gundam X collection in celebration of its 30th anniversary. The 1/144 Airmaster was my second kit as a very young kid.

The ā€˜new’ 2014 Airmaster needed a surprising amount of colour corrections. Notably the under-eye area should be white but was moulded in grey with the eyes. Still the kit was worth it for its looks because it wasn’t an easy design to modernise.


r/Gunpla • • 2h ago

CUSTOMIZING Finally made proper photos for my MG Sinanju

Thumbnail
gallery
27 Upvotes

r/Gunpla • • 3h ago

BUILD MG Riko's Zaku (Mass Production Girl Riko)

Thumbnail
gallery
27 Upvotes

Snagged this kit during my trip to Tokyo recently. Also one of the rare moments that I kept the box cover. Basically a recolored Zaku 2.0 with certainly unique decals.

I wanna watch the show after building this šŸ˜†


r/Gunpla • • 13h ago

BUILD Gundam Exceed Model Trinity RX-78-2

Thumbnail
gallery
162 Upvotes

r/Gunpla • • 15h ago

CUSTOMIZING My very first "custom" kit job: surgery on my HGUC Gramps' skirt!

Thumbnail
gallery
213 Upvotes

It always frustrated me a little bit with how the front skirt piece was just that, a singular part, which made the pose I had Gramps in look really jank.

I after a little bit of research, I found out that it's not only possible to split parts like this, but that a few people have already done it before!

All I had to do was take an exacto knife to the thin bar that connects the two sides of the skirt. I didn't even sand it, because I both don't have sandpaper or a file, and I wanted to make sure the fit was still tight. Well, that's that.

I don't know why I haven't done this sooner! šŸ˜…

Fortunately none of my other kits have this problem, but I'll keep this tip in mind in case I encounter it again. ^^


r/Gunpla • • 5h ago

SALES, DEALS & PREORDERS Dawenxi Model MGSD Wing Gundam EW

Thumbnail
gallery
36 Upvotes

Release window: December 2026

Price: 69RMB or $10.33 USD (probably closer to $25 when released)


r/Gunpla • • 4h ago

BUILD HGUC Gundam G07

Thumbnail
gallery
26 Upvotes

r/Gunpla • • 3h ago

DISPLAY My current Gunpla collection.

Post image
20 Upvotes

r/Gunpla • • 1d ago

BUILD RG Wing Zero (finished)

Thumbnail
gallery
1.8k Upvotes

I'm finally done it and made some photos with base. And I'll rate this like best kit, that I've done in 2026.


r/Gunpla • • 3h ago

Nu Gundam Mass Production bust

Thumbnail
gallery
15 Upvotes

Modified from the gashapon Nu Gundam Mechanic Bust as I have an armor set extra.


r/Gunpla • • 10h ago

BUILD Undefeated of the east! Blazing Spirits Master Gundam

Thumbnail
gallery
51 Upvotes

r/Gunpla • • 52m ago

Flicked some Warhammer blood wash onto this guy, effect came out great

Thumbnail
gallery
8 Upvotes

r/Gunpla • • 52m ago

Stickers or no?

Post image
7 Upvotes

Hey I just bought my first Gunpla and do I have to put stickers or just skip it ?