Are you looking for feedback or information on your salary or career? Then you've come to the right thread. If your questions are anything like the following example questions, then ask away:
Am I underpaid?
Is my offered salary market value?
How do I break into [industry]?
Will I be pigeonholed if I work as a [job title]?
What graduate degree should I pursue?
Message the mods for suggestions, comments, or feedback.
I would like to thank you everyone for participating in the annual 2026 ME Salary survey. Total respondents was a little over 600, so less than last year, but about 589 US responses.
Here are the main results. It took about 2 hours to "clean" the data manually. Afterwards, I basically used Gemini to create the graphs + tables, since last time it literally took me about 7 hours to do everything manually on Excel last time and there were still questions. The key points and takeaways from the data is a combination of AI and editing the information to be more readable (still took 4 hours). In addition, I wouldn't worry about math too much, since Gemini basically just used python code to decipher the edited CSV file.
Industry:
Industry
Number of Respondents
Manufacturing
175 (29.7%)
Aerospace/Defense
173 (29.4%)
Technology (FANG, AI, Robotics, etc.)
54 (9.2%)
MEP (HVAC, Construction, etc.)
38 (6.5%)
Utilities (Power, Renewables, etc.)
35 (5.9%)
Pharmaceutical & Medical Devices
31 (5.3%)
Oil and Gas
28 (4.8%)
Consumer Goods
15 (2.5%)
Government
11 (1.9%)
There were some other industries like nuclear, logistics, and etc. but the few data points aren't included in the table for brevity. The data was included in the total set though
A majority of the mechanical engineers trends will use the Aerospace/Defense and Manufacturing data since there is the most data that is available
Salary and Year of Experience:
*Note: Total Compensation/Salary = Base Salary + Bonus + RSU + Base Salary * 401k Match
If you want to look at one graph and table to explain the progression track here it is:
YOE Range
Median Base (Unadj)
Median Total (Unadj)
Median Base (COL Adj)
Median Total (COL Adj)
Count
0-1 Year
$87,000
$96,036
$81,699
$87,368
43
2 Years
$84,000
$91,046
$84,615
$90,909
71
3 Years
$94,550
$105,965
$94,082
$102,289
62
4-5 Years
$104,000
$119,770
$94,881
$107,762
116
6-8 Years
$120,000
$136,800
$112,500
$127,911
119
9-12 Years
$125,500
$146,985
$123,444
$142,555
96
13-20 Years
$157,290
$181,840
$144,254
$171,731
64
20+ Years
$196,500
$211,426
$163,399
$191,042
15
Key Takeaways:
The "Benefit Gap": The space between the solid lines (Total Compensation) and the dashed lines (Base Salary) represents the added value from annual bonuses and employer 401k matching. For a mid-career engineer (6-8 years), this extra value is roughly $16,800 on average.
Late Career Leverage: As engineers gain seniority (13+ years), the gap between base salary and total compensation grows significantly, suggesting that bonuses and incentive programs make up a larger portion of the package for senior-level and leadership roles.
Purchasing Power: The COL Adjusted lines (Orange) consistently track below the un-adjusted lines (Blue), highlighting that high-paying mechanical engineering roles are frequently located in markets where the dollar doesn't stretch as far as the national average.
Education:
Majority of the respondents are at max a bachelor degree holder. However, there is still a significant number of master's students
Now about the age old question: does having a Master's degree lead to higher future salary?
Short Answer: In general, the answer is yes if there is a chance to specialize. It is explained in the table below:
Industry
Career Stage
Education
Median Total (Unadj)
Median Total (COL Adj)
Count
Aerospace & Defense
0-3 Years
Bachelors
$96,664
$95,201
44
Masters
$116,600
$108,316
15
4-7 Years
Bachelors
$125,410
$110,659
39
Masters
$173,000
$148,432
9
8-15 Years
Bachelors
$161,750
$140,202
33
Masters
$154,905
$149,658
16
15+ Years
Bachelors
$207,080
$187,505
7
Masters
$211,426
$207,872
5
Manufacturing
0-3 Years
Bachelors
$88,220
$93,452
52
Masters
$93,740
$91,850
6
4-7 Years
Bachelors
$108,992
$106,701
45
Masters
$129,800
$128,407
12
8-15 Years
Bachelors
$135,425
$142,440
44
Masters
$136,298
$129,984
8
15+ Years
Bachelors
$182,650
$187,127
5
Now you can see that for manufacturing, the benefits is not as prominent, while it is evident in aerospace. This makes sense, since Aerospace have very high specialization salary, for instance: hypersonic or eVtol which pays a ton for total compensation based on years of experience.
Answer: if your company pays for your masters, do it, but it doesn't seem that beneficial near the end of your career.
Internships & Coops:
Key Insights:
The "Experienced" Majority: A combined 85% of respondents completed at least one internship or co-op. This underscores how critical early-career work experience has become for landing a full-time role in mechanical engineering.
Co-op Advantage: The 20% of respondents with "3+ Internships" often represent those in formal co-op programs (where students rotate between school and work over several years). These candidates typically command higher starting salaries shown in the table below:
Industry
0-1 Internship
2+ Internships
New Grad Premium
Aerospace & Defense
$82,000
$91,500
+$9,500
Manufacturing
$74,000
$82,000
+$8,000
MedTech
$80,500
$89,000
+$8,500
Certifications:
Here is the graph of a major certifications from the survey:
We always see a question on whether certifications are worth it:
Aerospace & Defense: Certification vs. Total Compensation
Experience
Education
Has Cert?
Median Unadj. Total
Median Adj. Total
Count
0-3 Years
Bachelors
No
$97,900
$95,426
41
Yes
$95,040
$64,653
3
4-7 Years
Bachelors
No
$125,315
$106,672
36
Yes
$128,580
$138,258
3
8-15 Years
Bachelors
No
$159,660
$139,839
31
Yes
$280,425
$177,895
2
Masters
No
$151,410
$142,043
13
Yes
$209,658
$216,142
3
Manufacturing: Certification vs. Total Compensation
Experience
Education
Has Cert?
Median Unadj. Total
Median Adj. Total
Count
0-3 Years
Bachelors
No
$88,020
$91,944
43
Yes
$90,450
$99,746
9
4-7 Years
Bachelors
No
$108,805
$106,615
36
Yes
$108,992
$106,701
9
8-15 Years
Bachelors
No
$135,000
$136,541
31
Yes
$136,000
$151,111
13
Masters
No
$152,212
$122,728
6
Yes
$134,815
$141,636
2
Key Findings:
High-Experience Premium in Aerospace: The most dramatic impact of certification appears in the mid-to-late career in Aerospace & Defense (8–15 years). Engineers with a Bachelors and a certification earn a median total compensation significantly higher than those without. Even among Masters holders in this range, certified engineers have a median total comp of $209k vs $151k for non-certified.
Manufacturing Stability: In the Manufacturing industry, certifications (often Six Sigma or FE/PE) lead to a very modest increase in un-adjusted base pay, but a more noticeable improvement in COL-adjusted pay. This suggests that certified engineers in Manufacturing may have more flexibility to find high-paying roles in lower-cost-of-living areas.
The "Entry-Level Paradox": For junior engineers (0–3 years), having a certification (likely the FE) does not immediately result in a salary premium. In fact, in Aerospace, the un-adjusted median for those with certifications was slightly lower, possibly because those engineers are still in entry-level rotation programs where pay is standardized regardless of credentials.
Masters + Certification: For those who already have a Masters, adding a certification provides a significant late-career boost (as seen in the 8–15 year group in Aerospace).
Answer: Certification can be worth it for select industries. PE is known for civil to open doors and increase pay.
Job Titles:
Job Role Category
Number of Respondents
Percentage
Mechanical Engineer (General)
229
38.9%
Design Engineer
97
16.5%
Project & Systems Engineer
59
10.0%
Management & Leadership
55
9.3%
Manufacturing & Process Engineer
54
9.2%
Specialized (Thermal, Stress, R&D)
34
5.8%
Other / Misc
61
10.4%
Key Insights:
General vs. Specialized: Nearly 40% of respondents identify with the broad title of "Mechanical Engineer," which often includes generalists or those in mid-level positions.
The Design Dominance:Design Engineering is the second largest single group, reflecting the high demand for CAD-based design and product development across aerospace, tech, and manufacturing industries.
Transition to Leadership: About 9% of respondents hold titles in Management & Leadership (Manager, Director, VP), which led to a higher salary
Project and Systems focus:1 in 10 engineers focuses on Project or Systems Engineering, highlighting the importance of multidisciplinary coordination and technical management in modern engineering projects.
The Specialty Niche: The "Specialized" category includes highly technical roles like Thermal Analysis, FEA, Simulation, and Research & Development, which often require higher educational levels or deep domain expertise.
Salary Grade vs. Salary:
Grade Level
Industry
Median Annual Salary
Typical Experience (YOE)
Sample Count
Level 1 (Entry)
Aerospace & Defense
$88,400
1.0 year
39
Manufacturing
$80,250
2.0 years
39
Level 2 (Mid)
Aerospace & Defense
$102,273
3.8 years
48
Manufacturing
$95,000
5.0 years
71
Level 3 (Senior)
Aerospace & Defense
$130,000
8.0 years
57
Manufacturing
$119,600
9.0 years
50
Level 4 (Lead/Manager)
Aerospace & Defense
$170,500
11.0 years
22
Manufacturing
$136,000
11.0 years
11
Level 5+ (Principal/Director)
Aerospace & Defense
$206,000
20.0 years
9
Manufacturing
$136,500
14.0 years
4
Efficiency of Experience: In Aerospace, engineers tend to reach Level 2 and Level 3 roughly 1–1.2 years faster than those in Manufacturing, while also earning more.
The Level 4 Ceiling: In Manufacturing, the salary jump from Grade 3 to Grade 4 is roughly $16k, whereas in Aerospace, that same promotion yields a massive $40k jump in median base salary.
Which Industry Pays the Most?
Major Caveat: at 16+ YOE, the data points are only a couple, which skews the data upward.
Based on the comprehensive US survey data, the Technology (FANG, Robotics, AI, Consumer Electronics) industry emerges as the highest-paying sector for mechanical engineers when considering total compensation (Base Salary + Annual Bonus + 401k Match).
Tech Compensation Package:
Years of Experience
Avg. Total Comp (Unadjusted)
Avg. Total Comp (Adjusted for COL)
Number of Respondents
0-2 YOE (Entry)
$117,316
$100,292
7
3-5 YOE (Junior)
$180,854
$138,040
17
6-10 YOE (Mid-Level)
$182,773
$134,543
14
11-15 YOE (Senior)
$259,993
$220,256
11
16+ YOE (Principal)
$244,775
$177,043
5
The Oil and Gas industry stands out as the second most lucrative sectors for mechanical engineers, particularly as they reach senior and principal levels. While Tech offers the highest overall unadjusted compensation, Oil and Gas actually offers the highest Cost of Living (COL) Adjusted compensation, meaning your real purchasing power in this industry is the highest among all major sectors.
Years of Experience
Avg. Total Comp (Unadjusted)
Avg. Total Comp (COL Adjusted)
Number of Respondents
0-2 YOE
$95,864
$83,178
5
3-5 YOE
$117,289
$111,155
7
6-10 YOE
$138,959
$139,773
7
11-15 YOE
$204,097
$219,757
6
16+ YOE
$408,040
$399,276
3
Overtime Pay:
Industry Trends: Overtime pay is slightly more common in Manufacturing (where production deadlines are rigid) and Consulting/EPC (where hours are billable to clients) compared to R&D or Aerospace.
Work Hours:
Work Hours Category
Number of Respondents
Percentage
Exactly 40 Hours
337
57.2%
41-45 Hours
146
24.8%
46-50 Hours
49
8.3%
<40 Hours
50
8.5%
>50 Hours
7
1.2%
Key Observations:
The "40-Hour" Standard: Over half of the engineers surveyed manage to stick to a strict 40-hour week, which is a positive sign for work-life balance in the profession.
Moderate Overtime: Roughly a quarter of engineers work an extra 1 to 5 hours a week (41-45 hours total), often representing "straight time" or expected professional dedication without formal overtime pay.
The High-Hours Exception: Only a small fraction (under 10%) report working more than 45 hours consistently. This is significantly lower than in fields like investment banking or high-tier management consulting, suggesting a relatively stable lifestyle for most US mechanical engineers.
Flexibility: About 8.5% of respondents work fewer than 40 hours, which often aligns with part-time roles, senior consultants, or companies with flexible "9/80" schedules where some weeks are shorter.
401k Summary:
Match Rate Range
Count of Responses
Percentage
4% - 5%
211
35.8%
1% - 3%
125
21.2%
6% - 7%
120
20.4%
8% - 10%
65
11.0%
No Match (0%)
56
9.5%
> 10% / Other
12
2.0%
Key Takeaways:
The Industry Standard: A 4–5% match is clearly the most common benefit, covering over a third of the surveyed population.
High-Tier Benefits: Roughly 13% of engineers receive a match of 8% or higher, which often indicates highly competitive benefit packages in specialized industries.
Retirement Security: The low percentage of "No Match" responses (under 10%) highlights that retirement contributions are a standard and expected part of total compensation in the US mechanical engineering market.
Remote Work Distribution:
Remote Category
Number of Respondents
Percentage
Fully In-Person (0%)
248
42.1%
Mostly In-Person (1-39%)
163
27.7%
Hybrid (40-60%)
118
20.0%
Fully Remote (100%)
38
6.5%
Mostly Remote (61-99%)
22
3.7%
Key Insights:
The "Hands-On" Requirement: Over 40% of mechanical engineers are required to be in the office or on-site 100% of the time. This is significantly higher than other engineering fields like Software or Data Science.
The Hybrid Standard: Roughly 48% of the workforce has some form of hybrid flexibility (ranging from 1% to 60% remote). Many companies now allow 1–2 days of remote work for documentation, CAD modeling, or administrative tasks.
Fully Remote is Rare: Only 6.5% of mechanical engineers work fully remotely. These roles are typically in specialized areas like pure Simulation/FEA, Project Management, or Sales Engineering where physical hardware access is not required daily.
The Hybrid Middle Ground: The 40–60% range (often 2–3 days per week) is a common "sweet spot" for engineering firms trying to balance teamwork/lab time with employee flexibility.
Paid Time Off (Days):
*Note: one issue is many jobs had unlimited sick time, which I just added 10 days. Next time I will edit the form to separate the sick days so it makes more sense.
PTO Category (Includes Sick Days)
Number of Respondents
Percentage
0–10 days
30
5.2%
11–15 days
112
19.5%
16–20 days
160
27.9%
21–25 days
100
17.4%
26–30 days
61
10.6%
31+ days
32
5.6%
Unlimited
78
13.6%
Key Insights:
The " 3 - 5 Week" Benchmark: The majority of mechanical engineers (over 45%) receive between 16 and 25 days of PTO.
The Rise of Unlimited PTO: About 13.6% of respondents now have "Unlimited" PTO.
Generous Packages: Roughly 16% of engineers receive more than 30 days of PTO, which is often a hallmark of high-seniority roles, government/defense positions, or companies that reward long tenure.
The Lean End: Only about 5% of respondents are on the low end with 10 days or fewer, suggesting that a minimum of two weeks of PTO is a standard baseline for the industry.
Now some of you might have questions regarding years of experience and PTO:
Average PTO by Experience (Fixed PTO)
Experience Level
Average PTO Days (per year)
Typical Range (25th-75th Percentile)
0–2 Years
16.9
10–15 days
3–5 Years
19.6
15–20 days
6–10 Years
21.1
20 days
11–15 Years
24.5
20–25 days
16+ Years
26.5
25–30+ days
Analysis of the Trend:
The "Standard Jump": Many engineers start with 15 days (3 weeks) and see their first significant "tenure bump" to 20 days (4 weeks) after reaching the 5-year mark.
Senior Perks: By the time an engineer hits 15+ years of experience, a 5-week (25-day) or 6-week (30-day) PTO package becomes the new baseline.
Job Hopping Factor: The data suggests that while tenure within a single company increases PTO, "job hopping" every 3–5 years also allows engineers to negotiate higher starting PTO tiers at their new employers, effectively "skipping" the long wait for tenure-based increases.
Health Insurance:
Satisfaction Level
Number of Respondents
Percentage
Free / Excellent
38
6.5%
Good (Low Premium/High Coverage)
211
36.3%
Average
288
49.5%
Poor (High Premium/Low Coverage)
41
7.0%
Other / Misc
4
0.7%
Key Insights:
The "Standard" Plan: Almost 50% of engineers describe their insurance as "Average," highlighting that standard employer-sponsored health insurance is common but not particularly outstanding in terms of premiums or coverage levels.
Competitive Benefits: Over 42% of respondents fall into the "Good" or "Free" categories. The 6.5% who receive "Free/Excellent" coverage likely work for highly competitive tech firms, established defense contractors, or companies that use premium benefits as a retention tool.
Under-Served Minority: Roughly 7% of the engineering workforce feels their health insurance is "Poor," usually characterized by high out-of-pocket costs and high monthly premiums.
Biggest Cons for Mechanical Engineering:
Category
Typical Concerns Mentioned
Workload & Hours (112 mentions)
High pressure, tight deadlines, long hours, and poor work-life balance. Many mentioned "start-up energy" even in established firms.
Salary & Compensation (73 mentions)
Low raises (2–3%), "salary plateauing" early in the career, and the absence of stock options or significant bonuses compared to tech.
Remote Work Limits (47 mentions)
Frequent requirements to be in the office or on the manufacturing floor with "no remote option" or "No WFH" (Work From Home) policies.
Career Growth (35 mentions)
Concerns about "pigeon-holing," slow internal promotion tracks, and becoming "stagnant" in one technical area.
Competitive base pay, annual bonuses, and strong 401k matching programs.
Work-Life Balance (75 mentions)
Flexible schedules, reasonable working hours (standard 40h), and generous PTO.
Culture & People (70 mentions)
Great teammates, supportive management, and a collaborative "team-first" environment.
Interesting Work (65 mentions)
Designing "cool" products, working on challenging technical problems, and having a clear mission.
Job Stability (28 mentions)
Long-term security, consistent demand for the role, and the stability of established firms.
Remote/Hybrid (27 mentions)
The ability to work from home part-time or have flexible geographic location.
Direct Insights from Engineers:
On Work Quality:"The actual work we do is really interesting, fun, and rewarding. Getting to see a design go from CAD to a physical product is the best part."
On Culture:"Great coworkers and a team environment where people actually mentor you instead of just giving you tasks."
On Flexibility:"Remote flexibility and a management team that trusts you to get your work done without micromanaging your hours."
On Compensation:"The total compensation package—including the 401k match and the annual bonus—makes the technical pressure worth it."
Now for Improvements on Suggestions on the Survey:
Regarding the COL instructions: totally my fault, sorry for not catching it. All of you were able to figure it out, but changed instructions from 0 - 2, so it makes a lot more sense now.
Adding a column for manager and IC: totally good suggestion, already added to new survey for 2027
Regarding adding gender or age: I will not add this into the survey just to make it more anonymous. I really do not see the value in this data, and I recommend just using government data to find the data.
Regarding the health insurance question: I have implemented the change on making it have three questions: annual premium, annual deductible, person coverage. I really did not want to make this part too complicated with max out of pocket and copay and etc. I think the premium, coverage and deductible is acceptable amount.
Edited the salary section to organize the % 401k match, salary, bonus, RSU to be in the same section making it easier, but separated the questions.
Comparison from the 2024, 2025 and 2026 Reddit Survey Results will be in another post, since this post is getting insanely long. Again, any other improvements or suggestions, please just comment below.
TDLR: Just check the 1st salary graph if you want the main results.
I've been working on this four bar linkage the past week, mainly trying to dial in the clearances in the 2 positions. I've managed to get that dialled in, and all the pivots are along a central line. Now, my next step is seeing if I can scale this up or down to for different bed sizes and then also create a final mechanism out of steel instead of the plywood prototype. This is my first time doing something like this, and to be honest, I got lucky with a lot of the maths 😅 does anyone smarter than me know how i could approach scaling this geometry? Thanks.
My Ansys fluent instructor wants us to do a cfd project on Ansys fluent, I want to choose something very interesting and at the same time something attractive for companies to see on my LinkedIn
If you don't think this is a good idea, please recommend other project ideas.
I bought this robotic arm to start working on automating some pick and place tasks on my benchtop, but I am having trouble tuning the motors. Whenever I move any motor the tip of the arm starts to sag, which I read is gravity sag. When I tried doing a PID sweep, and while I found parameters that got rid of the sag a bit (I can't have my TCP moving alot while descending), it seems I have introduced some shaking, and I can't find a set of parameters that moves very smoothly, which is confusing because I think the arm has a repeatability of like 3mm.
Thank you so much for your help! I am really stuck
Hi all, is it just me or the market is SUPER bad?? My resume is good (I believe) I’ve been to career counselors, my professors, LinkedIn, handshake, every place u can imagine I’ve applied. Rejection after rejection. I’m a junior meche and I’m having 0 luck. This time last year I’ve landed 3 interviews (still rejected) but I’ve gotten NONE so far. I’m so stressed abt this, the semester is so overwhelming and everyone is getting internships/full time offers and I’ve gotten nothing. Help 😭😭 What do I do if I don’t land an internship??? Project ideas ? Forgot to mention- I am in my schools rocket propulsion lab, thats where I get my hands on experience and knowledge. Im interested in working with rockets/aero so i know half of the jobs im applying for is a long shot , but the description of the job posts are identical to what ive done/qualify for. Theyre probably looking for someone with more experience but how do we get experience if no one is hiring lol.
I’m Auriane, a Master’s student in Organizational Communication at IAE de Poitiers (France). For my thesis, I’m researching the relationship between working in the automotive industry (or being a hands-on mechanic) and digital culture, specifically driving video games, sim-racing, and car forums. To get real-world insights from people in the field, I’ve put together a short, anonymous survey (takes about 5 minutes). I’m looking for responses from anyone in the technical chain: mechanics, diagnostic techs, apprentices, engineers, drivers, as well as weekend DIYers or cars fans. Whether you’re a dedicated sim-racer or have never touched a video game in your life, your perspective is equally valuable to avoid bias in the study. Link to the survey:https://framaforms.org/automotive-video-games-and-professional-identity-the-gaming-practices-of-automotive-industry-workers All responses are strictly anonymous and used solely for academic research (only my thesis supervisor and I have access to the data). If anyone is open to a quick 30-minute chat to go a bit deeper into the topic, you can also leave a contact at the very end of the form.
Basically I want 1 hole to be perpendicular to a line that goes through the centre of 2 holes. None of the surfaces are important, just the position of these 2 holes to the 1 hole. Would a pattern accomplish what I want?
I've read about using a pattern as a datum but I'm still confused, and just wanted to be 100% sure what I'd be asking for.
I'm a 2026 B.Tech ECE graduate. The job market for freshers in electronics has been pretty bad, and after struggling a lot I wasn't able to find an opportunity in my field , I managed to get a job as a CAD Design Engineer through a referral at a drilling equipment manufacturing company.
I'm working in the R&D department, where the work involves SolidWorks, mechanical design, hydraulics, pneumatics, electrical controls, sensors and machine development.
The machines aren't fully automated, but a single operator can operate them using a control box with joysticks, switches and displays.
My long term goal is to build a career in robotics and industrial automation. I'm okay with learning mechanical engineering concepts, but I'm concerned about whether starting in mechanical design will affect my future.
Suppose I spend 2–3 years in this R&D role and learn PLC programming, sensors, machine controls and automation alongside my current work. Will companies consider my ECE degree and experience, or will they prefer candidates with Mechanical or Mechatronics degrees?
Has anyone here been in a similar situation or made this kind of career transition? I want to know whether I'm making a sensible decision or potentially limiting my career options.
I built a welding positioner using a wheel hub/bearing from a car, it has a built in wheel speed sensor that is either a hall-effect or a magneto-resistive type. Is there a way to get it to display rpm? Or is there a better way to show rpm? Maybe something off of the variable speed motor? It needs to be very precise, 10ths of an rpm would be great
I'm trying to figure out a mechanical design for a mechanism I'm working on, but I'm currently stuck and could use some advice.
Here's the basic setup:
I have a closed housing with a lever that I push inward from the front. Inside the housing, I want to use a toggle linkage (over-center / knee lever mechanism) to push two pins outward, one on each side.
The problem is that the pins need to reach targets that are not directly aligned with their horizontal movement. The targets are located slightly higher than the pins' actual travel path, so a simple toggle mechanism alone won't work.
The targets are located outside and above the housing (marked in red in the drawing), while the entire mechanism itself must remain inside the housing (the blue outline). Nothing from the mechanism should protrude outside the housing.
My question is: What kind of mechanical linkage or mechanism would allow me to convert the inward motion of the front lever into an outward and slightly upward movement of the two pins, while keeping the entire mechanism inside the housing?
So I drew this up quickly so maybe the dimensions are not exactly correct. I am trying to find this as an off the shelf part, I'm calling it a pivot collar, but that is not coming up with anything.
I am making a gate system for a packer and if I can find something stock that would be much nicer than making custom parts.
I am a recently graduated Mechanical engineering student and have an average GPA and some beginner to Intermediateskills in CAD and FEA. I want to work in the material science based industry, specifically the type that produces materials that are used downstream in other industries. I have tried to lookup specific skills and softwares to learn and increase my chances of being hired, but there is no proper guide/index of what skills and projects would be more effective in achieving my goal. So I would like to ask for suggestions on specific skills and project recommendations that I can learn and implement quickly. Also software recommendations that are preferably free or open source as I am a graduated student and can't afford costly software licenses.
Who'd be valued better in their respective job market and in Germany? Let's say both completed their masters in Germany and now is looking for a job:
1.) an international student who completed their bachelors in Canada. During his bachelors, he learned mechanical engineering skills, contributed to student teams, did coops for 12 months, knows B2 french and B1-B2 German. Graduated from KIT.
Note: I speak B1 french and German. It doesn't help me find a job in Canada but rather for PR only.
2.) an international student who knows C1 German, learned 50% mechanical engineering skills compared to the student from Canada, moderate-to-no contribution in student teams, did werkstudent role for 4 - 6 months during his masters. Did both his bachelors and masters at KIT.
Note: C1 German has become the threshold to finding a job in Germany currently.
Note: the reason why I said 50% ME skills compared to the Canadian is cuz Germany education system got extreme academics pressure.
In the eyes of a Canadian recruiter for the 1st student and later on a German recruiter, and a German recruiter for the 2nd, who would they pick if they had one spot left?
We work with MIL-DTL, ASTM, AMS, etc industry specs and have to periodically check for revision changes. Does anyone know if there’s a tool or something that will notify you when there’s an update to a spec you work with?
I'm a recent Mechanical Engineering graduate (graduated with top honors). I turned 26 in September and graduated back in March.
I'm having a really tough time right now because it took me a while to land a job (from April to September). I interviewed with several large companies, both in my city and elsewhere, and successfully made it through multiple hiring processes. In the end, I decided to sign with a major company based in Rome, mainly because my family's financial situation didn't allow me to relocate, on top of a motorcycle accident I had this summer.
Because of that, I turned down an offer from a big aerospace company in Turin—a city where I would have really loved to move. Now I'm starting to regret it, especially because the role I accepted here in Rome turned out to lean much more toward civil engineering, even though it didn't come across that way during the interviews. I'm feeling pretty desperate right now because this isn't the field I wanted to start my career in, and I don't know what to do.
I'm afraid that starting out with this kind of experience will make it impossible to get hired later in mechanical engineering for more technical roles involving CAD or simulations. If I stay here for 6–12 months, do you think I'd still be able to switch fields, or am I already pigeonholed into civil engineering? Obviously looking for input from more experienced engineers here.
Unfortunately, I'm stuck in Rome until December/January because of a surgery I've had scheduled for a while. I'm worried I won't be able to find opportunities at that same level in Turin—either in aerospace or in roles closer to what I studied—and I feel like I've wasted all those years studying CAD and mechanical design.
Thanks in advance to anyone who takes the time to reply! 🙏🏻
Okay, I have a question. I am currently studying in the 6th semester of a Diploma in Mechanical Engineering in Bangladesh.
My question is: If I start by learning FreeCAD, will I be able to transfer my FreeCAD skills to SolidWorks later? Or should I start learning SolidWorks instead?
The reason I'm considering FreeCAD is that SolidWorks doesn't run on my PC, whereas FreeCAD runs smoothly.