r/MechanicalEngineering • u/Calciotutto79 • 18h ago
What does the m mean?
What does the m inside the pentagon block arrow mean?
r/MechanicalEngineering • u/Calciotutto79 • 18h ago
What does the m inside the pentagon block arrow mean?
r/MechanicalEngineering • u/DamonXIV • 2h ago
I've been working on this four bar linkage the past week, mainly trying to dial in the clearances in the 2 positions. I've managed to get that dialled in, and all the pivots are along a central line. Now, my next step is seeing if I can scale this up or down to for different bed sizes and then also create a final mechanism out of steel instead of the plywood prototype. This is my first time doing something like this, and to be honest, I got lucky with a lot of the maths š does anyone smarter than me know how i could approach scaling this geometry? Thanks.
Also, my workshop is a mess š my apologies š
r/MechanicalEngineering • u/Whole-Second-4093 • 5h ago
My Ansys fluent instructor wants us to do a cfd project on Ansys fluent, I want to choose something very interesting and at the same time something attractive for companies to see on my LinkedIn
If you don't think this is a good idea, please recommend other project ideas.
r/MechanicalEngineering • u/forgedhog • 23h ago
I built a welding positioner using a wheel hub/bearing from a car, it has a built in wheel speed sensor that is either a hall-effect or a magneto-resistive type. Is there a way to get it to display rpm? Or is there a better way to show rpm? Maybe something off of the variable speed motor? It needs to be very precise, 10ths of an rpm would be great
r/MechanicalEngineering • u/Fabian-Kozdon • 17h ago
Hey everyone,
I'm trying to figure out a mechanical design for a mechanism I'm working on, but I'm currently stuck and could use some advice.
Here's the basic setup:
I have a closed housing with a lever that I push inward from the front. Inside the housing, I want to use a toggle linkage (over-center / knee lever mechanism) to push two pins outward, one on each side.
The problem is that the pins need to reach targets that are not directly aligned with their horizontal movement. The targets are located slightly higher than the pins' actual travel path, so a simple toggle mechanism alone won't work.
The targets are located outside and above the housing (marked in red in the drawing), while the entire mechanism itself must remain inside the housing (the blue outline). Nothing from the mechanism should protrude outside the housing.
My question is:
What kind of mechanical linkage or mechanism would allow me to convert the inward motion of the front lever into an outward and slightly upward movement of the two pins, while keeping the entire mechanism inside the housing?
r/MechanicalEngineering • u/ibrahimumer007 • 1h ago
r/MechanicalEngineering • u/Commercial_Answer160 • 10h ago
I'm a 2026 B.Tech ECE graduate. The job market for freshers in electronics has been pretty bad, and after struggling a lot I wasn't able to find an opportunity in my field , I managed to get a job as a CAD Design Engineer through a referral at a drilling equipment manufacturing company.
I'm working in the R&D department, where the work involves SolidWorks, mechanical design, hydraulics, pneumatics, electrical controls, sensors and machine development.
The machines aren't fully automated, but a single operator can operate them using a control box with joysticks, switches and displays.
My long term goal is to build a career in robotics and industrial automation. I'm okay with learning mechanical engineering concepts, but I'm concerned about whether starting in mechanical design will affect my future.
Suppose I spend 2ā3 years in this R&D role and learn PLC programming, sensors, machine controls and automation alongside my current work. Will companies consider my ECE degree and experience, or will they prefer candidates with Mechanical or Mechatronics degrees?
Has anyone here been in a similar situation or made this kind of career transition? I want to know whether I'm making a sensible decision or potentially limiting my career options.
r/MechanicalEngineering • u/Prestigious_Log1323 • 16h ago

I am making a gate system for a packer and if I can find something stock that would be much nicer than making custom parts.
r/MechanicalEngineering • u/Bright-Wafer9089 • 18h ago
r/MechanicalEngineering • u/AnoyedGlitch • 19h ago
We work with MIL-DTL, ASTM, AMS, etc industry specs and have to periodically check for revision changes. Does anyone know if thereās a tool or something that will notify you when thereās an update to a spec you work with?
r/MechanicalEngineering • u/Other_Fee_9051 • 23h ago
it arjent,so lpg..
r/MechanicalEngineering • u/Acars_18 • 3h ago
Hi everyone,
Iām Auriane, a Masterās student in Organizational Communication at IAE de Poitiers (France). For my thesis, Iām researching the relationship between working in the automotive industry (or being a hands-on mechanic) and digital culture, specifically driving video games, sim-racing, and car forums.
To get real-world insights from people in the field, Iāve put together a short, anonymous survey (takes about 5 minutes). Iām looking for responses from anyone in the technical chain: mechanics, diagnostic techs, apprentices, engineers, drivers, as well as weekend DIYers or cars fans.
Whether youāre a dedicated sim-racer or have never touched a video game in your life, your perspective is equally valuable to avoid bias in the study.
Link to the survey: https://framaforms.org/automotive-video-games-and-professional-identity-the-gaming-practices-of-automotive-industry-workersĀ
All responses are strictly anonymous and used solely for academic research (only my thesis supervisor and I have access to the data). If anyone is open to a quick 30-minute chat to go a bit deeper into the topic, you can also leave a contact at the very end of the form.
Thanks a lot for your time and help!
r/MechanicalEngineering • u/throwaway69420322 • 6h ago
I made a quick sketch in paint. https://imgur.com/a/SsWjg8K
Basically I want 1 hole to be perpendicular to a line that goes through the centre of 2 holes. None of the surfaces are important, just the position of these 2 holes to the 1 hole. Would a pattern accomplish what I want?
I've read about using a pattern as a datum but I'm still confused, and just wanted to be 100% sure what I'd be asking for.
r/MechanicalEngineering • u/Bobthemaster21 • 2h ago
r/MechanicalEngineering • u/Summitthemist • 13h ago
Who'd be valued better in their respective job market and in Germany? Let's say both completed their masters in Germany and now is looking for a job:
1.) an international student who completed their bachelors in Canada. During his bachelors, he learned mechanical engineering skills, contributed to student teams, did coops for 12 months, knows B2 french and B1-B2 German. Graduated from KIT.
Note: I speak B1 french and German. It doesn't help me find a job in Canada but rather for PR only.
2.) an international student who knows C1 German, learned 50% mechanical engineering skills compared to the student from Canada, moderate-to-no contribution in student teams, did werkstudent role for 4 - 6 months during his masters. Did both his bachelors and masters at KIT.
Note: C1 German has become the threshold to finding a job in Germany currently.
Note: the reason why I said 50% ME skills compared to the Canadian is cuz Germany education system got extreme academics pressure.
In the eyes of a Canadian recruiter for the 1st student and later on a German recruiter, and a German recruiter for the 2nd, who would they pick if they had one spot left?
r/MechanicalEngineering • u/TransparentMastering • 23h ago
Itās for my novel and I just want to know what is reasonably possible, not exact numbers.
Please no AI
Edit: after a spacewalk accident, an astronaut in a EVA suit is thrown towards Io. It is decided they have just enough fuel to let them accelerate towards io and then burn all their remaining fuel to ādodgeā io and slingshot back to the ship, where a long elastic bungee has to be used to capture and decelerate them.
Key ideas are amount of fuel needed (would it fit in an EVA suit?) and how fast theyād end up travelling in a given scenario. I could handle the deceleration and distance of the elastic tether myself, but that would be an easy bonus.
Lastly, I have to make sure they could breathe long enough for the adventure to be a success