r/MechanicalEngineering • • 51m ago

Trying to tune motors on Waveshare Roarm M3

2 Upvotes

Hey yall,

I bought this robotic arm to start working on automating some pick and place tasks on my benchtop, but I am having trouble tuning the motors. Whenever I move any motor the tip of the arm starts to sag, which I read is gravity sag. When I tried doing a PID sweep, and while I found parameters that got rid of the sag a bit (I can't have my TCP moving alot while descending), it seems I have introduced some shaking, and I can't find a set of parameters that moves very smoothly, which is confusing because I think the arm has a repeatability of like 3mm.

Thank you so much for your help! I am really stuck

Here is a video of my arm moving.


r/MechanicalEngineering • • 1h ago

Why is the market HORRIBLE????

0 Upvotes

Hi all, is it just me or the market is SUPER bad?? My resume is good (I believe) I’ve been to career counselors, my professors, LinkedIn, handshake, every place u can imagine I’ve applied. Rejection after rejection. I’m a junior meche and I’m having 0 luck. This time last year I’ve landed 3 interviews (still rejected) but I’ve gotten NONE so far. I’m so stressed abt this, the semester is so overwhelming and everyone is getting internships/full time offers and I’ve gotten nothing. Help 😭😭 What do I do if I don’t land an internship??? Project ideas ? Forgot to mention- I am in my schools rocket propulsion lab, thats where I get my hands on experience and knowledge. Im interested in working with rockets/aero so i know half of the jobs im applying for is a long shot , but the description of the job posts are identical to what ive done/qualify for. Theyre probably looking for someone with more experience but how do we get experience if no one is hiring lol.


r/MechanicalEngineering • • 3h ago

How to Apply Auto Dimensions in Solidworks Drawing | Auto Arrange Dimensions Solidworks | CADable

Thumbnail
youtu.be
2 Upvotes

r/MechanicalEngineering • • 4h ago

Four bar linkage for a seat mechanism

Thumbnail
gallery
46 Upvotes

I've been working on this four bar linkage the past week, mainly trying to dial in the clearances in the 2 positions. I've managed to get that dialled in, and all the pivots are along a central line. Now, my next step is seeing if I can scale this up or down to for different bed sizes and then also create a final mechanism out of steel instead of the plywood prototype. This is my first time doing something like this, and to be honest, I got lucky with a lot of the maths 😅 does anyone smarter than me know how i could approach scaling this geometry? Thanks.

Also, my workshop is a mess 🙃 my apologies 😅


r/MechanicalEngineering • • 4h ago

Delay MS by 1 semester for a semi-technical supply chain internship?

Thumbnail reddit.com
0 Upvotes

r/MechanicalEngineering • • 5h ago

Automotive workers & DIYers: what’s your take on driving video games?

Post image
0 Upvotes

Hi everyone,

I’m Auriane, a Master’s student in Organizational Communication at IAE de Poitiers (France). For my thesis, I’m researching the relationship between working in the automotive industry (or being a hands-on mechanic) and digital culture, specifically driving video games, sim-racing, and car forums.
To get real-world insights from people in the field, I’ve put together a short, anonymous survey (takes about 5 minutes). I’m looking for responses from anyone in the technical chain: mechanics, diagnostic techs, apprentices, engineers, drivers, as well as weekend DIYers or cars fans.
Whether you’re a dedicated sim-racer or have never touched a video game in your life, your perspective is equally valuable to avoid bias in the study.
Link to the survey: https://framaforms.org/automotive-video-games-and-professional-identity-the-gaming-practices-of-automotive-industry-workers 
All responses are strictly anonymous and used solely for academic research (only my thesis supervisor and I have access to the data). If anyone is open to a quick 30-minute chat to go a bit deeper into the topic, you can also leave a contact at the very end of the form.

Thanks a lot for your time and help!


r/MechanicalEngineering • • 7h ago

Is GPU server room cooling and air flow optimization a good CFD project on Ansys?

Post image
24 Upvotes

My Ansys fluent instructor wants us to do a cfd project on Ansys fluent, I want to choose something very interesting and at the same time something attractive for companies to see on my LinkedIn

If you don't think this is a good idea, please recommend other project ideas.


r/MechanicalEngineering • • 8h ago

Hole pattern question, how would you tolerance perpendicularity of a hole on 1 axis, to 2 holes on a different axis?

0 Upvotes

I made a quick sketch in paint. https://imgur.com/a/SsWjg8K

Basically I want 1 hole to be perpendicular to a line that goes through the centre of 2 holes. None of the surfaces are important, just the position of these 2 holes to the 1 hole. Would a pattern accomplish what I want?

I've read about using a pattern as a datum but I'm still confused, and just wanted to be 100% sure what I'd be asking for.


r/MechanicalEngineering • • 12h ago

Electronics engineering graduate working in mechanical R&D. Will it affect my future?

2 Upvotes

I'm a 2026 B.Tech ECE graduate. The job market for freshers in electronics has been pretty bad, and after struggling a lot I wasn't able to find an opportunity in my field , I managed to get a job as a CAD Design Engineer through a referral at a drilling equipment manufacturing company.

I'm working in the R&D department, where the work involves SolidWorks, mechanical design, hydraulics, pneumatics, electrical controls, sensors and machine development.

The machines aren't fully automated, but a single operator can operate them using a control box with joysticks, switches and displays.

My long term goal is to build a career in robotics and industrial automation. I'm okay with learning mechanical engineering concepts, but I'm concerned about whether starting in mechanical design will affect my future.

Suppose I spend 2–3 years in this R&D role and learn PLC programming, sensors, machine controls and automation alongside my current work. Will companies consider my ECE degree and experience, or will they prefer candidates with Mechanical or Mechatronics degrees?

Has anyone here been in a similar situation or made this kind of career transition? I want to know whether I'm making a sensible decision or potentially limiting my career options.


r/MechanicalEngineering • • 15h ago

Not being able to decide whether I should go for Canada or Germany. Both job markets seem to be cooked

0 Upvotes

Who'd be valued better in their respective job market and in Germany? Let's say both completed their masters in Germany and now is looking for a job:

1.) an international student who completed their bachelors in Canada. During his bachelors, he learned mechanical engineering skills, contributed to student teams, did coops for 12 months, knows B2 french and B1-B2 German. Graduated from KIT.

Note: I speak B1 french and German. It doesn't help me find a job in Canada but rather for PR only.

2.) an international student who knows C1 German, learned 50% mechanical engineering skills compared to the student from Canada, moderate-to-no contribution in student teams, did werkstudent role for 4 - 6 months during his masters. Did both his bachelors and masters at KIT.

Note: C1 German has become the threshold to finding a job in Germany currently.

Note: the reason why I said 50% ME skills compared to the Canadian is cuz Germany education system got extreme academics pressure.

In the eyes of a Canadian recruiter for the 1st student and later on a German recruiter, and a German recruiter for the 2nd, who would they pick if they had one spot left?


r/MechanicalEngineering • • 19h ago

looking for a part

1 Upvotes
So I drew this up quickly so maybe the dimensions are not exactly correct. I am trying to find this as an off the shelf part, I'm calling it a pivot collar, but that is not coming up with anything.

I am making a gate system for a packer and if I can find something stock that would be much nicer than making custom parts.


r/MechanicalEngineering • • 19h ago

I need help :(

0 Upvotes

I want to ask you about an issue I'm having with my 1995 Toyota Corolla diesel, in case you could give me some advice.

By mistake, I connected the battery with the terminals reversed (positive and negative switched). As soon as this happened, there was a short circuit and the main 80A GLOW fuse for the glow plug system blew.

I'm now trying to remove the fuse so I can replace it, but I can't figure out how to get it out. I've partially disassembled the fuse box and checked both the front and the back, but I can't identify any screws, clips, or release mechanism that would allow me to remove it. I don't want to force it and risk breaking the fuse box or damaging any electrical connections.

I wanted to ask if you're familiar with this model or if you've ever worked with a similar fuse box. Do you know how to remove this 80A fuse, or whether a specific part of the fuse box needs to be disassembled first?

I'd also like to know if there are any other fuses or electrical components I should check after connecting the battery backwards, before reconnecting everything.

I'd really appreciate any advice or guidance you could give me. I know it's a very specific issue, but any help would mean a lot.

Thank you very much for your time and help!


r/MechanicalEngineering • • 19h ago

Need help designing a compact mechanism using a toggle linkage to move pins upward and outward

Post image
3 Upvotes

Hey everyone,

I'm trying to figure out a mechanical design for a mechanism I'm working on, but I'm currently stuck and could use some advice.

Here's the basic setup:

I have a closed housing with a lever that I push inward from the front. Inside the housing, I want to use a toggle linkage (over-center / knee lever mechanism) to push two pins outward, one on each side.

The problem is that the pins need to reach targets that are not directly aligned with their horizontal movement. The targets are located slightly higher than the pins' actual travel path, so a simple toggle mechanism alone won't work.

The targets are located outside and above the housing (marked in red in the drawing), while the entire mechanism itself must remain inside the housing (the blue outline). Nothing from the mechanism should protrude outside the housing.

My question is:
What kind of mechanical linkage or mechanism would allow me to convert the inward motion of the front lever into an outward and slightly upward movement of the two pins, while keeping the entire mechanism inside the housing?


r/MechanicalEngineering • • 20h ago

What does the m mean?

Post image
165 Upvotes

What does the m inside the pentagon block arrow mean?


r/MechanicalEngineering • • 20h ago

Anyone seen this before? Never seen a roof like this football stadium ever!

Thumbnail instagram.com
1 Upvotes

r/MechanicalEngineering • • 21h ago

Industry Spec Tracking

1 Upvotes

We work with MIL-DTL, ASTM, AMS, etc industry specs and have to periodically check for revision changes. Does anyone know if there’s a tool or something that will notify you when there’s an update to a spec you work with?


r/MechanicalEngineering • • 1d ago

How to close in running time,the tip hole on this wire mesh cone rolling machine?"

Thumbnail gallery
1 Upvotes

it arjent,so lpg..


r/MechanicalEngineering • • 1d ago

Can anyone do some hand-wavy calculations for a slingshot manoeuvre?

0 Upvotes

It’s for my novel and I just want to know what is reasonably possible, not exact numbers.

Please no AI

Edit: after a spacewalk accident, an astronaut in a EVA suit is thrown towards Io. It is decided they have just enough fuel to let them accelerate towards io and then burn all their remaining fuel to “dodge” io and slingshot back to the ship, where a long elastic bungee has to be used to capture and decelerate them.

Key ideas are amount of fuel needed (would it fit in an EVA suit?) and how fast they’d end up travelling in a given scenario. I could handle the deceleration and distance of the elastic tether myself, but that would be an easy bonus.

Lastly, I have to make sure they could breathe long enough for the adventure to be a success


r/MechanicalEngineering • • 1d ago

Rpm readout for welding positioner.

Thumbnail
gallery
10 Upvotes

I built a welding positioner using a wheel hub/bearing from a car, it has a built in wheel speed sensor that is either a hall-effect or a magneto-resistive type. Is there a way to get it to display rpm? Or is there a better way to show rpm? Maybe something off of the variable speed motor? It needs to be very precise, 10ths of an rpm would be great


r/MechanicalEngineering • • 1d ago

I want advice on upskilling for hirerability.

3 Upvotes

I am a recently graduated Mechanical engineering student and have an average GPA and some beginner to Intermediateskills in CAD and FEA. I want to work in the material science based industry, specifically the type that produces materials that are used downstream in other industries. I have tried to lookup specific skills and softwares to learn and increase my chances of being hired, but there is no proper guide/index of what skills and projects would be more effective in achieving my goal. So I would like to ask for suggestions on specific skills and project recommendations that I can learn and implement quickly. Also software recommendations that are preferably free or open source as I am a graduated student and can't afford costly software licenses.


r/MechanicalEngineering • • 1d ago

Can FreeCAD Skills Be Transferred to SolidWorks?

0 Upvotes

Okay, I have a question. I am currently studying in the 6th semester of a Diploma in Mechanical Engineering in Bangladesh.

My question is: If I start by learning FreeCAD, will I be able to transfer my FreeCAD skills to SolidWorks later? Or should I start learning SolidWorks instead?

The reason I'm considering FreeCAD is that SolidWorks doesn't run on my PC, whereas FreeCAD runs smoothly.


r/MechanicalEngineering • • 1d ago

Simple steam engine

0 Upvotes

edit: corrected inlet channels

would this work?