r/MechanicalEngineering • • 1h ago

Turbine inspection

Post image
137 Upvotes

Hi All,

I’m curious as to how turbine blades (in power generation) are inspected before and after disassembly in terms of NDT.

Do you use visual inspection only when inspecting the turbine when it is in its housing to make sure cracks etc are not appearing?

Or is there more to it? (Eddy Current, etc)

Curious as to what the process of this is as an outsider to this field and I hope someone can answer.


r/MechanicalEngineering • • 8h ago

Four bar linkage for a seat mechanism

Thumbnail
gallery
52 Upvotes

I've been working on this four bar linkage the past week, mainly trying to dial in the clearances in the 2 positions. I've managed to get that dialled in, and all the pivots are along a central line. Now, my next step is seeing if I can scale this up or down to for different bed sizes and then also create a final mechanism out of steel instead of the plywood prototype. This is my first time doing something like this, and to be honest, I got lucky with a lot of the maths 😅 does anyone smarter than me know how i could approach scaling this geometry? Thanks.

Also, my workshop is a mess 🙃 my apologies 😅


r/MechanicalEngineering • • 1h ago

Looking for an ME! I've reached my limit

Post image
9 Upvotes

This may be too close to "design this for me" - but where is the best place to hire one of y'all to help with a project in my small business? I'm beyond my pay grade and need someone with more than my two brain cells to help with design and implementation of a plastic tube cutting device.

If you're great with fixture and tooling design, small production machines, or simple pneumatic automation, I'd love to hear from you.

Edit: More Context -

I am far from an engineer so it is encouraging to hear this may be possible...

Photos linked here. I work with tubing .122-.142" OD.

I designed and 3D printed a jig that gets a consistent cut each time. However, some of the tubing is too tough for the razor to chop through. I've done some slice testing, and its better but not great.

Additionally, doing one tube at a time is very time consuming. Surely there is a way to do multiple at once.

I have a handful of ideas, but going from something on paper into a prototype and eventually production is where I am hung up.

I can do 1 every 6 seconds, so any solution needs to outpace that.


r/MechanicalEngineering • • 3h ago

4 bar linkage mechanism are amazing

13 Upvotes

Following previous post on 4 bar linkage seats (great job!) I wanted to share how 4 bar linkage can switch from simple to multiloops complex shape. you can play with the shape here: https://onsketch.io/app/?view=9b3504f6-5058-4161-a4e1-fdb993a8054a


r/MechanicalEngineering • • 1h ago

Made movable wings in my wood/metalworking class

6 Upvotes

Thoughts? i will be doing more to make it smoother tomorrow, but overall I really like it ^^


r/MechanicalEngineering • • 2h ago

Offering used/old engineering books

Post image
6 Upvotes

r/MechanicalEngineering • • 11h ago

Is GPU server room cooling and air flow optimization a good CFD project on Ansys?

Post image
28 Upvotes

My Ansys fluent instructor wants us to do a cfd project on Ansys fluent, I want to choose something very interesting and at the same time something attractive for companies to see on my LinkedIn

If you don't think this is a good idea, please recommend other project ideas.


r/MechanicalEngineering • • 1d ago

What does the m mean?

Post image
175 Upvotes

What does the m inside the pentagon block arrow mean?


r/MechanicalEngineering • • 11m ago

Entry-Level Roles at Solar Turbines vs Raytheon

1 Upvotes

Hello, I'm a new grad, and I got two offers I am having trouble deciding between. I got into the Solar Turbines GTPE rotational program in San Diego and a mechanical structural engineer role at Raytheon in Tucson. I really want to pick the role that I will learn the most in and advance my career. Solar Turbines pays $5k more, but Raytheon has a 9/80 schedule and will sponsor my clearance. Do you guys have any advice or recommendations? Anything would help. Thanks in advance.


r/MechanicalEngineering • • 4h ago

Trying to tune motors on Waveshare Roarm M3

2 Upvotes

Hey yall,

I bought this robotic arm to start working on automating some pick and place tasks on my benchtop, but I am having trouble tuning the motors. Whenever I move any motor the tip of the arm starts to sag, which I read is gravity sag. When I tried doing a PID sweep, and while I found parameters that got rid of the sag a bit (I can't have my TCP moving alot while descending), it seems I have introduced some shaking, and I can't find a set of parameters that moves very smoothly, which is confusing because I think the arm has a repeatability of like 3mm.

Thank you so much for your help! I am really stuck

Here is a video of my arm moving.


r/MechanicalEngineering • • 2h ago

Inginer sudor

0 Upvotes

Va salut, e prima data cand las un mesaj pe un astfel de grup dar vreau sa stiu parerea voastra si daca imi puteti da cateva sfaturi legate de problema mea. Urmeaza sa termin in acest an pe specializarea de Ingineria sudarii si simt ca am facut 3 ani degeaba, mi se pare foarte complicat sa identific sudurile pe un plan…din pacate e si prima data cand fac chestia asta dupa 3 ani si ceva de facultate. Ideea e ca as vrea sa lucrez in domeniul naval si ma simt foarte nepregătit pentru postura de inginer cu toate ca imi doresc mult asta. Ce e si mai greu pentru mine, profesoara care ma invata si imi este si îndrumător pentru licenta are foarte multe pretentii de la mine..cum e si normal dar ma mist pur si simplu dobitoc si nu stiu ce sa mai fac pentru a putea termina aceasta facultate si mai mult de atat sa va intreb daca am vreo sansa sau daca macar merita sa sper la un job in domeniul pe care mi l doresc? Va multumesc anticipat!


r/MechanicalEngineering • • 7h ago

How to Apply Auto Dimensions in Solidworks Drawing | Auto Arrange Dimensions Solidworks | CADable

Thumbnail
youtu.be
2 Upvotes

r/MechanicalEngineering • • 5h ago

Why is the market HORRIBLE????

1 Upvotes

Hi all, is it just me or the market is SUPER bad?? My resume is good (I believe) I’ve been to career counselors, my professors, LinkedIn, handshake, every place u can imagine I’ve applied. Rejection after rejection. I’m a junior meche and I’m having 0 luck. This time last year I’ve landed 3 interviews (still rejected) but I’ve gotten NONE so far. I’m so stressed abt this, the semester is so overwhelming and everyone is getting internships/full time offers and I’ve gotten nothing. Help 😭😭 What do I do if I don’t land an internship??? Project ideas ? Forgot to mention- I am in my schools rocket propulsion lab, thats where I get my hands on experience and knowledge. Im interested in working with rockets/aero so i know half of the jobs im applying for is a long shot , but the description of the job posts are identical to what ive done/qualify for. Theyre probably looking for someone with more experience but how do we get experience if no one is hiring lol.


r/MechanicalEngineering • • 5h ago

Seeking Innovative Designs for a Multifunctional Home Gym Machine

1 Upvotes

Hello everyone!

I'm working on an idea for a compact, multifunctional home workout machine, and I'm looking for innovative concepts, engineering designs, and inspiration from people with experience in mechanical engineering, product design, fitness equipment, or DIY projects.

My goal is to develop a machine that allows users to perform a wide variety of exercises targeting different muscle groups, while taking up as little space as possible.

I'm particularly interested in:

Innovative mechanical systems and cable/pulley configurations.

Adjustable resistance mechanisms.

Compact designs with multiple exercise functions.

Engineering sketches, CAD models, 3D designs, or prototypes.

Ideas that improve stability, safety, ergonomics, and ease of use.

Creative solutions that make a single machine capable of replacing several gym machines.

If you have designed something similar, have interesting concepts, or know of existing designs that could serve as inspiration, I'd really appreciate it if you shared them.

I'm open to unconventional ideas and creative engineering solutions.

Thank you! I'm looking forward to seeing your ideas.


r/MechanicalEngineering • • 8h ago

Delay MS by 1 semester for a semi-technical supply chain internship?

Thumbnail reddit.com
0 Upvotes

r/MechanicalEngineering • • 9h ago

Automotive workers & DIYers: what’s your take on driving video games?

Post image
0 Upvotes

Hi everyone,

I’m Auriane, a Master’s student in Organizational Communication at IAE de Poitiers (France). For my thesis, I’m researching the relationship between working in the automotive industry (or being a hands-on mechanic) and digital culture, specifically driving video games, sim-racing, and car forums.
To get real-world insights from people in the field, I’ve put together a short, anonymous survey (takes about 5 minutes). I’m looking for responses from anyone in the technical chain: mechanics, diagnostic techs, apprentices, engineers, drivers, as well as weekend DIYers or cars fans.
Whether you’re a dedicated sim-racer or have never touched a video game in your life, your perspective is equally valuable to avoid bias in the study.
Link to the survey: https://framaforms.org/automotive-video-games-and-professional-identity-the-gaming-practices-of-automotive-industry-workers 
All responses are strictly anonymous and used solely for academic research (only my thesis supervisor and I have access to the data). If anyone is open to a quick 30-minute chat to go a bit deeper into the topic, you can also leave a contact at the very end of the form.

Thanks a lot for your time and help!


r/MechanicalEngineering • • 12h ago

Hole pattern question, how would you tolerance perpendicularity of a hole on 1 axis, to 2 holes on a different axis?

0 Upvotes

I made a quick sketch in paint. https://imgur.com/a/SsWjg8K

Basically I want 1 hole to be perpendicular to a line that goes through the centre of 2 holes. None of the surfaces are important, just the position of these 2 holes to the 1 hole. Would a pattern accomplish what I want?

I've read about using a pattern as a datum but I'm still confused, and just wanted to be 100% sure what I'd be asking for.


r/MechanicalEngineering • • 16h ago

Electronics engineering graduate working in mechanical R&D. Will it affect my future?

2 Upvotes

I'm a 2026 B.Tech ECE graduate. The job market for freshers in electronics has been pretty bad, and after struggling a lot I wasn't able to find an opportunity in my field , I managed to get a job as a CAD Design Engineer through a referral at a drilling equipment manufacturing company.

I'm working in the R&D department, where the work involves SolidWorks, mechanical design, hydraulics, pneumatics, electrical controls, sensors and machine development.

The machines aren't fully automated, but a single operator can operate them using a control box with joysticks, switches and displays.

My long term goal is to build a career in robotics and industrial automation. I'm okay with learning mechanical engineering concepts, but I'm concerned about whether starting in mechanical design will affect my future.

Suppose I spend 2–3 years in this R&D role and learn PLC programming, sensors, machine controls and automation alongside my current work. Will companies consider my ECE degree and experience, or will they prefer candidates with Mechanical or Mechatronics degrees?

Has anyone here been in a similar situation or made this kind of career transition? I want to know whether I'm making a sensible decision or potentially limiting my career options.


r/MechanicalEngineering • • 1d ago

Rpm readout for welding positioner.

Thumbnail
gallery
10 Upvotes

I built a welding positioner using a wheel hub/bearing from a car, it has a built in wheel speed sensor that is either a hall-effect or a magneto-resistive type. Is there a way to get it to display rpm? Or is there a better way to show rpm? Maybe something off of the variable speed motor? It needs to be very precise, 10ths of an rpm would be great


r/MechanicalEngineering • • 23h ago

Need help designing a compact mechanism using a toggle linkage to move pins upward and outward

Post image
3 Upvotes

Hey everyone,

I'm trying to figure out a mechanical design for a mechanism I'm working on, but I'm currently stuck and could use some advice.

Here's the basic setup:

I have a closed housing with a lever that I push inward from the front. Inside the housing, I want to use a toggle linkage (over-center / knee lever mechanism) to push two pins outward, one on each side.

The problem is that the pins need to reach targets that are not directly aligned with their horizontal movement. The targets are located slightly higher than the pins' actual travel path, so a simple toggle mechanism alone won't work.

The targets are located outside and above the housing (marked in red in the drawing), while the entire mechanism itself must remain inside the housing (the blue outline). Nothing from the mechanism should protrude outside the housing.

My question is:
What kind of mechanical linkage or mechanism would allow me to convert the inward motion of the front lever into an outward and slightly upward movement of the two pins, while keeping the entire mechanism inside the housing?


r/MechanicalEngineering • • 23h ago

looking for a part

1 Upvotes
So I drew this up quickly so maybe the dimensions are not exactly correct. I am trying to find this as an off the shelf part, I'm calling it a pivot collar, but that is not coming up with anything.

I am making a gate system for a packer and if I can find something stock that would be much nicer than making custom parts.


r/MechanicalEngineering • • 1d ago

I want advice on upskilling for hirerability.

3 Upvotes

I am a recently graduated Mechanical engineering student and have an average GPA and some beginner to Intermediateskills in CAD and FEA. I want to work in the material science based industry, specifically the type that produces materials that are used downstream in other industries. I have tried to lookup specific skills and softwares to learn and increase my chances of being hired, but there is no proper guide/index of what skills and projects would be more effective in achieving my goal. So I would like to ask for suggestions on specific skills and project recommendations that I can learn and implement quickly. Also software recommendations that are preferably free or open source as I am a graduated student and can't afford costly software licenses.


r/MechanicalEngineering • • 19h ago

Not being able to decide whether I should go for Canada or Germany. Both job markets seem to be cooked

0 Upvotes

Who'd be valued better in their respective job market and in Germany? Let's say both completed their masters in Germany and now is looking for a job:

1.) an international student who completed their bachelors in Canada. During his bachelors, he learned mechanical engineering skills, contributed to student teams, did coops for 12 months, knows B2 french and B1-B2 German. Graduated from KIT.

Note: I speak B1 french and German. It doesn't help me find a job in Canada but rather for PR only.

2.) an international student who knows C1 German, learned 50% mechanical engineering skills compared to the student from Canada, moderate-to-no contribution in student teams, did werkstudent role for 4 - 6 months during his masters. Did both his bachelors and masters at KIT.

Note: C1 German has become the threshold to finding a job in Germany currently.

Note: the reason why I said 50% ME skills compared to the Canadian is cuz Germany education system got extreme academics pressure.

In the eyes of a Canadian recruiter for the 1st student and later on a German recruiter, and a German recruiter for the 2nd, who would they pick if they had one spot left?