r/Tapo • • 9h ago

Suggestions + Feedback C120 but 4K

4 Upvotes

I hope there’s planning for a 4K version of the C120, it would be great as is small, and the magnet compatible feature lets you put it in more places easily, but for me the small form factor is great so it doesn’t stand out, and a note, please better microphone management for the c120,s line or new models because I have some 120 and 121 and have the noise canceling so aggressive that it sounds awful and more when you have a street in front you cannot hear conversations or anything just noises like someone is playing with plastic and making noise.


r/Tapo • • 2h ago

Need Advice Does your Topdon TC001 always work with the iphone/ipad?

1 Upvotes

I got myself a Topdon TC001 camera. The hardware seems solid, it always works when i connect it to my raspberry PI. However, when I use the IOS app (on either my ipad pro M4 or the Iphone 18 pro max) its hit or miss. 9 out of 10 times it doesn't recognize the camera and I end up restarting the app, plugging it in and out.. very frustrating. I am wondering if I am the only one with this issue.


r/Tapo • • 7h ago

Need Advice Camaras TAPO C220

2 Upvotes

las camaras Tapo C220 notifican si son desenchufadas? con sinceridad deseo desenchufarla y a los pocos segundos volverla a enchufar ya q mi madre se fue de viaje y pues deseo meter a mi pareja a mi departamento pero me da miedo ver q le notifique que la cámara fue desconectada o no se algo por el estilo

ella sabe que anteriormente metía a mi novia a escondidas entonces intuiría rápido el "por q la desenchufe y luego la desenchufe"

me ayudarían si me confirman esta duda muchas gracias


r/Tapo • • 1d ago

Need Advice Tapo d260 4k installed

Thumbnail
gallery
49 Upvotes

Not much of a review but initial impressions. My previous was the d130? The d260 is HUGE and so much better built. Image quality is also a good jump better. Lots of good image settings for color and has HDR.

My only complaint is it's 4k at 15fps. For the price it should be at a minimum 20fps. Paired with the h500 hub in seconds and it's good to go. I'll post more after I get some time with it.


r/Tapo • • 6h ago

Projects Tapo DL105 + T110: Door-Aware Auto-Lock Using 7 Smart Automations (Tested & Working)

Thumbnail
gallery
1 Upvotes

I recently installed a Tapo DL105 smart deadbolt and wanted something it doesn't support natively: automatic locking based on whether the door is actually closed.

After quite a bit of experimenting, troubleshooting, and testing, I finally got a 7-automation system working entirely within the Tapo app!

No Home Assistant, external automation software, or third-party services required.

Required Hardware

You'll need three Tapo devices:

  • Tapo DL105 — Smart Deadbolt
  • Tapo H100 or H110 — Smart Hub
  • Tapo T110 — Door Contact Sensor

All three devices are required.

The T110 communicates through the H100/H110 hub, while the DL105 connects independently through Wi-Fi. The Tapo app coordinates them using Smart Automations.

What This Setup Does

  • Door opens and closes: Starts a 3-minute countdown, then automatically locks.
  • Door opens again during the countdown: Cancels the pending lock. Closing the door starts a fresh countdown.
  • Door remains open: Designed to prevent the automation from extending the deadbolt while the door is open.
  • Door is unlocked without opening: Starts a separate 3-minute countdown, then automatically relocks.
  • Door opens during that separate countdown: Cancels the pending relock and transfers control to the normal door-close automation.

The system uses two alternating auto-lock timers (A and B), two corresponding cancellation rules, and three additional automations for unlocking without opening the door.


⚠️ IMPORTANT: Create Rules 1–4 in Two Stages

Rules 1–4 are interdependent and must be created before their action lists can be completed.

These four automations work together as two alternating pairs:

  • Rule 1: Auto-Lock Timer A
  • Rule 2: Auto-Lock Timer B
  • Rule 3: Open-Cancel A
  • Rule 4: Open-Cancel B

Each rule uses actions that enable or disable other rules in the group. However, the Tapo app only allows you to select an automation that already exists.

Stage 1 — Create All Four Automations

Create Rules 1–4 in the order listed, setting up their triggers and conditions as described below.

For now, add only a temporary or incomplete action list to each rule, just enough to save it.

Do not attempt to configure all the automation-control actions yet.

The goal is simply to get all four automations created and visible in the Tapo Smart tab.

Stage 2 — Complete Their Action Lists

Once all four automations exist, go back and edit each one individually.

Add the complete action sequence exactly as shown below, including the delays and actions that enable or disable the other automations.

Remove any temporary actions that are not part of the final configuration.

Do not activate or test the system until all four rules are fully configured. Incomplete rules may produce unexpected behavior.

⚠️ CRITICAL: Set the Correct A/B Starting States

Rules 1–4 operate as two alternating pairs. Only one pair should be active at a time.

After completing all four rules, manually set their ON/OFF switches in the Tapo Smart tab as follows:

  • Rule 1 — Auto-Lock Timer A: ON
  • Rule 2 — Auto-Lock Timer B: OFF
  • Rule 3 — Open-Cancel A: ON
  • Rule 4 — Open-Cancel B: OFF

Both A rules must start ON, and both B rules must start OFF.

This is intentional. The automations automatically switch between the A and B pairs during operation, allowing the system to cancel an active countdown when the door opens and prepare the opposite timer for the next cycle.

Do not manually turn on all four automations. Doing so can interfere with the alternating sequence and cause unexpected behavior.

Once configured correctly, the system manages these switches automatically. You should not need to change them during normal operation.

Important: My screenshots show the automations in reverse creation order (newest at the top). Follow the automation names and ON/OFF states, not their positions on the screen.

Rules 5–7 Are Different

These three rules can be created normally, one at a time, in the listed order:

  • Rule 5: Re-Lock In Place
  • Rule 6: Cancel In-Place on Open
  • Rule 7: Re-Arm In-Place on Close

Rule 5 must exist before Rules 6 and 7 can reference it.

All three should start ON.


Complete 7-Rule Configuration

Set Effective Time: Always for all seven automations.

Rule 1 — Auto-Lock Timer A

Initial State: ON

WHEN:

  • T110 Door Sensor → Close

IF:

  • DL105 Door Lock → Unlocked

THEN (in order):

  1. Delay → 3 minutes
  2. DL105 → Lock the Door
  3. Delay → 1 second
  4. Turn ON → Auto-Lock Timer B
  5. Turn ON → Open-Cancel B
  6. Turn OFF → Open-Cancel A
  7. Turn OFF → Auto-Lock Timer A

Rule 2 — Auto-Lock Timer B

Initial State: OFF

WHEN:

  • T110 Door Sensor → Close

IF:

  • DL105 Door Lock → Unlocked

THEN (in order):

  1. Delay → 3 minutes
  2. DL105 → Lock the Door
  3. Delay → 1 second
  4. Turn ON → Auto-Lock Timer A
  5. Turn ON → Open-Cancel A
  6. Turn OFF → Open-Cancel B
  7. Turn OFF → Auto-Lock Timer B

Rule 3 — Open-Cancel A

Initial State: ON

WHEN:

  • T110 Door Sensor → Open

IF:

  • No conditions

THEN (in order):

  1. Turn OFF → Auto-Lock Timer A
  2. Delay → 1 second
  3. Turn ON → Auto-Lock Timer B
  4. Turn ON → Open-Cancel B
  5. Turn OFF → Open-Cancel A

Rule 4 — Open-Cancel B

Initial State: OFF

WHEN:

  • T110 Door Sensor → Open

IF:

  • No conditions

THEN (in order):

  1. Turn OFF → Auto-Lock Timer B
  2. Delay → 1 second
  3. Turn ON → Auto-Lock Timer A
  4. Turn ON → Open-Cancel A
  5. Turn OFF → Open-Cancel B

Rules 1–4 form the alternating timer system.

Rule 5 — Re-Lock In Place

Initial State: ON

WHEN:

  • DL105 → Unlocked (Any Method)

IF:

  • T110 Door Sensor → Close

THEN:

  1. Delay → 3 minutes
  2. DL105 → Lock the Door

This handles someone unlocking the deadbolt without actually opening the door.

Rule 6 — Cancel In-Place on Open

Initial State: ON

WHEN:

  • T110 Door Sensor → Open

IF:

  • No conditions

THEN:

  1. Turn OFF → Re-Lock In Place

This cancels the separate countdown if someone opens the door.

Rule 7 — Re-Arm In-Place on Close

Initial State: ON

WHEN:

  • T110 Door Sensor → Close

IF:

  • No conditions

THEN:

  1. Delay → 2 seconds
  2. Turn ON → Re-Lock In Place

This prepares Rule 5 for the next time someone unlocks the door without opening it.


Final Automation States

Before testing, verify that all seven switches match this configuration:

    1. Auto-Lock Timer A — ON
  • 2. Auto-Lock Timer B — OFF
  • 3. Open-Cancel A — ON
  • 4. Open-Cancel B — OFF
  • 5. Re-Lock In Place — ON
  • 6. Cancel In-Place on Open — ON
  • 7. Re-Arm In-Place on Close — ON

Screenshot note: My Tapo automation list displays the rules in reverse creation order. Rule 7 appears at the top, and Rule 1 at the bottom.

This is normal and does not affect operation.

Why Two Alternating Timers?

The key discovery was that disabling a Tapo automation cancels its pending delayed actions, which I confirmed through testing on my setup.

The original single-timer approach had a problem: opening the door disabled the timer, but enabling it when the door closed happened too late to catch that same closing event.

The A/B approach solves this by enabling the opposite timer when the door opens, so it's already armed before the next closing event.

The 1-second delays separate the handoff actions, helping the automation states transition correctly.

Testing and Precautions

For initial testing, I recommend temporarily shortening both 3-minute timers to 15–20 seconds.

Test these scenarios:

  1. Open and close: The door should lock after the countdown.
  2. Reopen during countdown: The pending lock should be canceled.
  3. Close again: A fresh countdown should start.
  4. Unlock without opening: The separate in-place timer should relock the door.
  5. Unlock, then open: The in-place countdown should be canceled.
  6. Open and close repeatedly: The A/B timers should continue alternating without getting stuck.

Safety warning: This is a community-developed workaround, not an officially supported door-aware locking feature. Although it works in my testing, firmware changes, connectivity issues, or automation failures could affect its behavior.

Test thoroughly with the door open and the deadbolt clear of the strike plate before relying on it. Keep a reliable way to unlock the door, and don't assume that a lock command guarantees the door is physically secured.

Adjusting the Auto-Lock Time

I'm currently using 3 minutes, but you can change the countdown to suit your needs.

For consistent behavior, change the delay in all three locking automations:

  • Rule 1 — Auto-Lock Timer A
  • Rule 2 — Auto-Lock Timer B
  • Rule 5 — Re-Lock In Place

Leave the 1-second and 2-second handoff delays unchanged unless you're specifically experimenting with the automation logic.


I'm sharing screenshots of all seven automations so others can reproduce the configuration.

Hopefully TP-Link will eventually add native door-sensor-aware auto-locking to the DL105, eliminating the need for this workaround.

Until then, this setup has been working for me.

Feel free to share your results or improvements!


r/Tapo • • 15h ago

Need Advice 24/7 capture detection for small animals?

3 Upvotes

Does the 24/7 capture help detect small animals like cats, raccoons, and skunks better than a PIR sensor on a battery camera like the C465?  What's your experience?


r/Tapo • • 21h ago

Troubleshooting and Support Beyond disappointed

8 Upvotes

I had posted before. I moved from blink to tapo. Solar c402 kits. One died and I begged tapo to replace it as it was bought from Amazon used market place. They were nice to do that.

Another died 2 weeks ago and then last night it got cold in Virginia and all the cameras lost 30% battery suddenly and struggled to charge all day and now out of 10 cameras I have 4 more dead.

Seriously tapo WTF. One could be bad. Two could be bad but 4 cameras together and it is not even below freezing yet

Thinking of putting the blinks back on

C402 v2 1.3.5 firmware. Solar is not charging at all. The solar charging graph is empty


r/Tapo • • 19h ago

Troubleshooting and Support C325WB V2 keeps going offline (PoE Ethernet)

1 Upvotes

I have 3 C325WB’s. One is V1 and the other 2 are V2. All are Ethernet connected, with the V2’s using PoE.
I have one V2 that worked fine for about a month but is now going offline about once a day. LED on the front is red. I have to pull the PoE power at the switch and it comes back online after plugging back in.

Any thoughts, or maybe just a bad unit?


r/Tapo • • 21h ago

Troubleshooting and Support What happened to the timeline and scrubbing? C121

1 Upvotes

After some recent update the timeline bar has gotten a lot thinner vertically and makes it much harder to scrub through now. How can I revert back to the fatter timeline?

Hardware version 1.0
Firmware 1.9.4
iOS app version 3.22.801


r/Tapo • • 22h ago

Need Advice D260 wedge screws wrong size?

Thumbnail
gallery
1 Upvotes

Hi there. Just purchased a D260 doorbell camera to replace our older Tapo doorbell from around 4 years ago. Went to install it and realised to get the best vision from the doorbell I would need to use the 15% wedge. Problem is - the screws that Tapo have provided do not appear to be the correct size? They don't appear to be small enough to screw into the smaller holes on the wedge itself.

I've attached some photos to help clarify what I mean. Have I indeed been sent the wrong screws, or is there something I am missing about how these screws are meant to work? If these are indeed the wrong screws, can anyone tell me what type to get? I've been to 5 different stores trying to find the right screws, but nobody seems to know what size would actually fit.

Thanks in advance for any help anyone can give!


r/Tapo • • 1d ago

Need Advice Just Picked up the Tapo D260 Video Door Bell on the AMZ Black friday sale along with the H200

3 Upvotes

So I was looking to dumb my ring as I had enough paying for a camera that seemed to notify me after people were leaving my front door and the basic price was absurd for what it was. I was looking at the reolink but people had just as many issues as other brands and it was 2k.

So I waited for Black friday and the D260 had a $60 discount tp 159 so I bought one. In addition I ordered the H200 hub.

I am running lots of TP Link smart plugs and lights but use alexa for immediate control. I have not yet received either device. My concern is that the H200 was a waste of money. I have not yet found that once it is setup I can just remove the ethernet cable and run it on WIFI only.

I am not really interested in storing every event for posterity that happen in front of my door. Not yet ready to surround my home in cameras either. I just want to get rid of ring and have something that works and does not totally suck.

When I ordered the H200 I was thinking I would just put a 16gb SD in the doorbell and 256gb in the H200. Then the more I looked the more confusing the H200 became. I was going to hardwire the doorbell and use the H200 as my new chime. But I also have echos around my house.

  1. Can the H200 be used in WIFI only mode on my existing TP Link WIFI 7 mesh network after setup. No I have only a single network no sub networks setup.
  2. Will the H200 enable any additional functionality for the D260 video doorbell other than external storage and a chime.
  3. Will ithe H200 make the doorbell any faster to respond to my android phone?
  4. will the H200 sync the smaller sd card in the doorbell to its larger sd card
  5. Does the H200 make any difference to the dozen or so TP Link plugs/strips and Wifi lights I already have running

r/Tapo • • 1d ago

Projects I made a clamp so my Tapo C200 can point further down

Thumbnail
gallery
8 Upvotes

My first mount had a fixed angle and the camera still pointed too high. I added a toothed hinge so I can loosen the knob, tilt the camera and tighten it again. Both screws are printed too.

You can set the clamp opening and screw length to fit your own shelf. I put the files here: https://makerworld.com/en/models/3652886-tapo-c200-camera-clamp-mount-adjustable-tilt


r/Tapo • • 1d ago

Projects Tapo Discount Codes: US/UK/Germany/Italy/France & More

Thumbnail reddit.com
0 Upvotes

r/Tapo • • 1d ago

Need Advice Tapo Community?

1 Upvotes

Hi to all. I’ve recently purchased a couple Tapo cameras so am fairly new here. On a post I made here a week ago, someone suggested I join the Tapo Community (tp-link), which I did.

However, when I went to make a post they want to know the model number of the camera. It’s an actual drop down list where you must choose one.
One of mine is the Tapo C545D dual lens. This also has a model number of TC47.

But it always states that they cannot find that model. It then will not allow me to make a post.

Am I doing something wrong?


r/Tapo • • 1d ago

Need Advice Tapo Rv50 Omni vs Rv30 max plus gen 2

1 Upvotes

Hi All,

Just wondering what robot vacuum i should get? Seen a few bad reviews regarding rv50. RV30 is £170 currently and RV50 £290.

TIA


r/Tapo • • 2d ago

Official Heads Up! Instagram “Fall In” Giveaway for US Users

Post image
4 Upvotes

Sharing this for anyone in the US who may be interested: our social team is running an Instagram giveaway over the next few days.

🍂 Fall In. Enter to Win. 🍂

Check out the giveaway post on Instagram and follow the instructions in the description for a chance to win. Additional terms, conditions, and eligibility details are available on the Instagram post.

Enter Here on Instagram


r/Tapo • • 1d ago

Need Advice Does Tapo H500 record locally if I turn off my router at night?

1 Upvotes

If I completely power off my main Wi-Fi router at night, will my paired Tapo cameras keep recording locally to the Tapo H500, or will they lose connection until the router is back on?


r/Tapo • • 2d ago

Need Advice Is an offline Tapo C200 with a private Tailscale viewer safer than using the stock app?

3 Upvotes

I'm testing this with one TP-Link Tapo C200 before moving the other cameras. The camera is on a separate Wi-Fi router with no internet uplink and wireless client isolation enabled. An Ubuntu gateway connects to that network over dedicated Ethernet. Its firewall blocks general forwarding between the camera network and the home LAN. The camera's RTSP feed is pulled locally by MediaMTX and shown in Safari using WebRTC. The page uses HTTP inside the encrypted Tailscale tunnel, with no public route, Funnel, or external STUN/TURN. The page and the separate WebRTC media port are restricted to two approved Tailscale devices. Camera credentials stay on the gateway, and the relay does not record.

Compared with using the stock Tapo app with its normal cloud connectivity, what risks does this actually remove, and what risks does it add? I'm especially interested in gateway compromise, firmware updates for an offline camera, whether private HTTP is a sensible trade-off, and whether the same design is practical for several cameras. What would you verify before trusting it long term?


r/Tapo • • 2d ago

Troubleshooting and Support Tapo Indoor C201 camera fails at the end of setup

1 Upvotes

I have been trying to setup my camera as I moved house. We are using the same Wifi as before but it was reconfigured so had to reset Tapo camera as well (since it wasn't connecting).

I am able to find the camera, connect to wifi, but pairing fails.
LED is blinking red and green.

Is there any way to resolve this?


r/Tapo • • 3d ago

Suggestions + Feedback 4K C575D Black Friday Sale

Thumbnail
link.amazon
6 Upvotes

Inventory on this camera has been spotty for months.

It's in stock and on a Black Friday sale so I finally ordered one.

Just thought I would let everyone know, grab it while you can.


r/Tapo • • 3d ago

Troubleshooting and Support Tapo keeps sending me ad notifications despite having it disabled

Thumbnail
gallery
5 Upvotes

To make matters worse, it's sent on the same notification channel as my motion detectors, which are placed in secure locations. So if I get a notifications while I'm not in there, I'm on edge and expect either somebody breaking in or a false alarm. To then see an ad, despite disabling it, is extremely frustrating to say the least.

This has happened multiple times over the last 2 months now. Does anyone have this issue or know how to "fix" it, assuming this isn't an intentional choice by TP-Link?


r/Tapo • • 3d ago

Projects Made an iPhone app that shows Tapo cams without the cloud, looking for testers

9 Upvotes

Hi all, solo dev here. I've been building an iOS app called Lanvio that plays IP cameras straight over your local network, no cloud, no account. Tapo works through RTSP/ONVIF.

It's in TestFlight right now and I'd love a few more Tapo owners to try it, especially models I don't have.

To make it work you need to turn on the camera account in the Tapo app first (Camera Settings → Advanced Settings → Camera Account). Then in Lanvio just scan your network, tap the camera and log in with that account.

It also does multiview, picture in picture, and works from outside if you've set that up.

TestFlight link: https://testflight.apple.com/join/gpe98232

If something doesn't work, tell me the model and I'll look into it. Thanks!


r/Tapo • • 3d ago

3rd Party Integrations DL110 & HA

2 Upvotes

Anyone else been messing around with the DL110 or had any success getting more capabilities out of it?
I’ve been using the integration from angelvals and have managed to get 33 entities working so far, including auto-lock, security settings, doorbell/speaker settings, calibration, and activity history.
Most of it is still read-only, but I’ve gotten quite a bit more functionality than I originally expected. I’m still working on expanding it and hoping to get even more out of it.
Just curious if anyone else has been experimenting with it or has made any progress beyond the original integration.


r/Tapo • • 3d ago

Troubleshooting and Support Issue connecting P430M outdoor dinner directly through Apple Home / Matter, but connected without issue via Tapo App?

2 Upvotes

Hello! Before I return this device (because it seems to be the only Matter listed outdoor dimmable plug I've seen), I wanted to check in here in case there are any undocumented steps I might take to get the plug working.

Basically I've tried:

  1. factory reset the plug, try to pair with iOS Appe Home app using QR Code
  2. factory reset again, and again, and try again...
  3. Pairing with the Tapo app, then trying to connect via Matter

To be clear, the Tapo app immediately recognized the device as soon as I open the app, adding it to the App was flawless and quick. The problem with that is I have no desire to use (or even install) a third party app, I specifically purchased the Matter device because I'd like to use it with Apple Home specifically.

Are there any non-obvious steps I should be taking to get the thing working with Apple Home directly?