r/fixit • • 19h ago

Tile is lifting!!

Thumbnail
gallery
22 Upvotes

Moved into a house in August, noticed the floors are cover in crappy cheap tiles. They are rising and have been that way since move in, no biggie truly I don’t care about them. But recently just read they could harbor phorid flies which I’ve been seeing 2-3 of near daily. Job for the landlord? Or something I can fix?


r/fixit • • 23h ago

Vacuum cleaner plastic

Thumbnail
gallery
5 Upvotes

r/fixit • • 21h ago

open Christmas tree lights

Thumbnail
gallery
4 Upvotes

The cord on my 7ft Ashland Hudson Pine Pre-Lit Christmas Tree (Color Changing LED Lights, Michaels Item #10742808) has snapped, and I’m wondering if there’s a way to repair it or purchase a replacement part without having to replace all the lights on the tree.

The LED lights themselves are perfectly fine, but the cord connecting them to the power adapter/outlet is damaged, so I can no longer turn the tree on.

If I hold the two broken ends of the cord together, the tree lights up. I’m just not sure what the proper/safe way to repair this would be or what replacement part I would need.

Any advice is appreciated!


r/fixit • • 22h ago

open Basement dryer vent

Thumbnail
gallery
4 Upvotes

This old house recently purchased has laundry in the basement. Electric dryer vents through the side foundation, goes underground for a couple feet, then straight into the bottom of a window well.

Canadian winter, so window well will fill up with snow, blocking exhaust. Pipe doesn't have a cover or anything to keep rodents out either, so that will get done.

Any suggestions for a better vent location, or what to even do with the existing in the interim? Do I build a cover the well and put a side vent on it for the winter? I dont care about the natural light down here.


r/fixit • • 21h ago

This door doesn't close because the latch bolt doesn't extend all the way into the strike plate

3 Upvotes

r/fixit • • 4m ago

How can I lubricate this door hinge?

Thumbnail
gallery
2 Upvotes

My door squeaks when opening and closing.

The hinges look like this (see pictures). I've tried turning the top part, but it doesn't seem to come off.

How can I lubricate these hinges? Is there a way to remove the top part?

Thanks!


r/fixit • • 15h ago

Help with a snapped off torx bit in Stressless Recliner

Post image
2 Upvotes

I just bought a stressless recliner from a consignment store and went to take the backrest off so I could load it in my car when I found someone had snapped off a torx driver bit inside the left side backrest mounting bolt. It's in there very tight and flush with nothing to grab onto. Any ideas on the best way to get it out without damaging anything?

Update: I appreciate all the ideas. I tried a few but ultimately got it home by borrowing a friend's 4runner, so now I no longer have the time constraint and can drill it if need be


r/fixit • • 6h ago

Toolbox lock jammed

Post image
1 Upvotes

We have the keys, it’s in unlocked position but the centre bit is meant to pop out and won’t. Anyone have any hot tips to unlock it?


r/fixit • • 7h ago

remove water stains

Thumbnail
gallery
1 Upvotes

bought a window off marketplace but got a little rain on it as i was carrying it in. how can i remove these water stains?


r/fixit • • 7h ago

open Victorian Wine/Booze Cabinet

Thumbnail
gallery
1 Upvotes

Wife and I just closed on this gorgeous older victorian home not long ago. She was polishing a built in bar cabinet in the dining room and tried to finesse one of the shelves back in but cracked the glass pane. She's absolutely devastated and doesnt think we can find a way to restore it because of its age and delicacy. Surely someone out there has a suggestion


r/fixit • • 8h ago

fixed How to unlock this door?

Thumbnail
gallery
1 Upvotes

I locked my bedroom door.

It has the button that you press in to lock the door on the other side. I pressed that in (idk why) and closed the door but now it won't unlock. I have the key to the door but it doesn't even turn when its in.

There is a small hole (last photo) in the knob that I have tried pushing pins in and nothing has changed.

I am a uni student so I really cannot afford a locksmith. This is a flat i'm renting so I also cannot afford to damage the door.

Any help would be much appreciated.


r/fixit • • 10h ago

Fantech WG9 Katana wireless mouse teardown: PCB photos

Thumbnail
gallery
1 Upvotes

Device: Fantech WG9 Katana wireless mouse. The PCB is marked "Kanata Wireless WG9 240603". I couldn't find board photos of it anywhere online, so I've included mine.

Problem:

  • The cursor suddenly stopped moving.
  • Left and right click, the scroll wheel, the side buttons, and the RGB all still worked.
  • The red sensor LED on the bottom was not lit.
  • The battery is fine (702535 LiPo, 3.7V, 2.22Wh) because the RGB and buttons work.

What I tried:

  1. Opened it up and unplugged the battery.
  2. Peeled back the insulating tape to inspect the sensor chip. I found no visible burns, corrosion, or damage.
  3. Tapped one of the sensor pins with a small screwdriver, and the sensor LED lit up and tracking worked again.
  4. Put tissue between the PCB and the bottom shell (away from the battery) and reassembled. It works normally for now.

My guess: a cracked or cold solder joint on one of the sensor pins.

Questions:

  • Does this sound like a bad solder joint, or something else?
  • Is reflowing all the sensor pins with flux the right fix?
  • Is there anything else I should check?

r/fixit • • 15h ago

open Ripped or cracked screw in point between wooden table and load bearing wood table leg

Post image
1 Upvotes

Hello everyone, I need some help in order to fix this table. Recently we had wifi installed and during the installation the table was moved and the leg broke off. The table is an inch thick of solid wood. I’ve thought about using a fastener to act as a replacement but haven’t found a suitable replacement.


r/fixit • • 19h ago

FAULTY RECLINERS

Thumbnail
gallery
1 Upvotes

Can anyone help me troubleshoot my power reclining sofa?

I have a three-seater reclining sofa from Raymour & Flanigan, and the warranty has expired. Both reclining seats are now stuck halfway. They only move back and forth about 8 inches.

When either seat reaches the point where it gets stuck, the light on the control button fades out. When I release the button, the light comes back on.

The problem started after I tipped the sofa over to vacuum underneath and remove things like bottle caps, pencils, and crayons. When I put it back upright, one seat would no longer return to its normal position. I thought the actuator was faulty, so I replaced it, but that did not fix the problem.

I then tipped the other seat over to look at how its mechanism worked. After that, it also became stuck in exactly the same position as the first seat.

Could tipping the sofa have shifted or jammed something? Is there a particular position the seats need to be in before tipping or returning the sofa upright? These are just my guesses, so I would appreciate advice from anyone who has experienced this or knows how to fix it.

The middle seat’s wooden frame and screws have also come apart, but I can handle that repair. I mainly need help getting the two reclining seats working again.

Any suggestions would be appreciated.

Here is the link showing light fading out https://photos.app.goo.gl/ChYi6Ezij454CRNo6

Thank you!


r/fixit • • 19h ago

open New kitchen faucet doesn't swivel

Thumbnail
gallery
1 Upvotes

Hello everyone,

I'm a complete beginner when it comes to DIY projects so please forgive me if my question is silly, but I cannot find an answer to it anywhere online.

I recently had to install a new kitchen faucet (M14450 ibergrif). After making sure the mounting nut was screwed in as tight as possible, I could no longer swivel the faucet left or right. I tried loosening it a little, which helped but now the entire tap also swivels whenever I turn the faucet.

I haven't found any advice that helped so far. Do you guys have any ideas as to what I am doing wrong? Pics are attached


r/fixit • • 19h ago

Beko washer-dryer (5 yrs old) completely dead after violent spin – filter & cable OK, what next? Repair or replace?

1 Upvotes

Hi everyone,

I have a 5-year-old Beko washer-dryer combo (I never use the dryer function). During a spin cycle it started banging very hard (it was probably not well levelled), then the breaker tripped. Since then the machine is completely dead: no lights, no display, no reaction at all. The breaker no longer trips when I plug it back in.

What I've checked so far (always unplugged):

  • The wall socket works.
  • No water leak under or behind the machine.
  • Power cord and noise suppression filter tested with a multimeter: continuity is fine from the plug pins all the way to the output wires of the filter. No burn marks, no swelling on the filter.
  • I removed the top cover and the control panel. All connectors on the main board and the display board (ref. 2487801000) look properly seated, no visible burn marks. I unplugged and replugged them.
  • Motor control module ref. 2446407000 is at the bottom next to the filter. I didn't open it.
  • After reassembling and plugging it back in: still completely dead.

Some background: for a long time the machine would occasionally stop in the middle of a cycle, on and off, and I never found why. I've also opened it a few times in the past, and a few plastic clips on the front panel got slightly damaged.

My questions:

  1. What would be the most likely culprit now: the main/power board, the display board, or something else (door lock, a fuse on a board, a wiring harness damaged by the banging)?
  2. Is there anything else I can safely test myself with a multimeter before calling a technician?
  3. Is it worth repairing? A local repair service charges about €75 (call-out + diagnosis, repair bonus included) plus parts. Meanwhile, Black Friday deals for a basic washing machine are around €300–400. Given the history of random stops, would you repair or replace?

Thanks a lot for your help!


r/fixit • • 20h ago

Help with Removing baby gate clamp

1 Upvotes

Clamp left on a metal railing from what we think was a baby gate. Unable to remove. Not budging when tapping. Tried Allen keys, fishing line. There are no seams or lip to block that we've felt around or looked for. When taking pictures we just used foam sheet to block background. Last resort will be to leave it but it's a nice original railing that we've wanted to keep and refresh with paint.

Edit: Thank you everyone for your suggestions. I think the heat option is our next move. Though will sit on that for a bit before going ahead with it. Fingers crossed.

Front of Clamp
Back of clamp

r/fixit • • 20h ago

Tiny part of screw stuck in back of key fob - how to get it out?

Thumbnail
gallery
1 Upvotes

So my last key fob broke and I bought a new case for it. But when I dismantled the key fob and started to add the new one, I noticed the screw was stuck in the back part. The chunk of screw in the back is taller than the key fob itself.

Any ideas for how to get this out? I tried a small precision screwdriver, but it wasn’t enough.

Thanks in advance!


r/fixit • • 22h ago

Suitable type of screw to reattach grill element back to roof of oven?

Thumbnail gallery
1 Upvotes

Cross posting as I'm not 100% sure where to put this. Thank you for any info!


r/fixit • • 22h ago

open Hardwood floor panel

Thumbnail
gallery
1 Upvotes

The edges of the floor panel is not flushed and you can press it down about less than a 1/4" but it will not stay flat, what are my options? Glue or replace the whole panel?


r/fixit • • 23h ago

Fix glaze in porcelain

Thumbnail
gallery
1 Upvotes

Hello,

I have this vintage porcelain container. My wife wants to use it, but doesn’t like that the glaze or whatever is cracked/missing at the photographed place on the inside.

Is there a way for me to fix it in a food safe way - just some kind of surface I can put over it?


r/fixit • • 23h ago

Kenmore 400 agitator moves a tiny bit but not really. Lifted the agitator top drum and found these little squares. Is it fixable? I am not a repair person at all.

Thumbnail gallery
1 Upvotes

r/fixit • • 2h ago

open Cat carabiner broke

Post image
0 Upvotes

I got it in June, I started using it to hang up an over the door organizer on a hook starting September to November 22. It was fine and presented no issues during it but I would occasionally put heavy stuff in the organizer like my phone and headphones on it and then I tried to remove it today and it was kind of buggy so I used a bit of force and then next thing I knew it snapped off </3 any help would be appreciated


r/fixit • • 4h ago

Window opening crank fell off

Thumbnail
gallery
0 Upvotes

Previously just put in the metal rod/pin thingy and it got back to working, but now a second piece fell out and I’m not sure where it goes.