r/homeassistant • • 3d ago

✍️ Blog Community Day 2026: You knocked it out of the park!

Thumbnail
openhomefoundation.org
20 Upvotes

97 events. 35 countries. 2,712 smart home enthusiasts πŸ’–

The turnout for our second annual Community Day – and the first to welcome ESPHome and Music Assistant communities alongside Home Assistant enthusiasts – blew us away. Thank you to every host, guest, and partner who made it happen!

Click link to read the full recap, dive into the stats, and get a sneak peek at what’s coming in 2027 πŸ™Œ


r/homeassistant • • 3d ago

🀝 Works with Home Assistant Aeotec joins WWHA, I Interviewed them about Z-Wave Long Range

25 Upvotes

I was lucky enough to get an interview with Denis PΓ€tz, President Europe of Aeotec, about their new Z-Wave Long Range sensors and joining the Works with Home Assistant programme: YouTube

What was really great to hear is that the new sensors improve range even with older Z-Wave coordinators. With a Long Range coordinator, range can be over a kilometre (about 0.6 miles) in open air, which means things like garden sheds can get sensors in them. Also, you can power the new sensors via USB-C, which saves having a drawer full of coin batteries!

My blog post

The official Home Assistant blog post

Disclosure: Aeotec are sending me some sensors for a future hands on review.


r/homeassistant • • 1h ago

πŸ’¬ Discussion Is it just me...

Post image
435 Upvotes

Or is this venn diagram basically a circle?


r/homeassistant • • 3h ago

πŸ› οΈ DIY / Hardware I reverse-engineered the 2.4 GHz remote of a no-name ceiling lamp so it works in Home Assistant (ESPHome, no SDR needed)

171 Upvotes

Our living room had two things I wanted in HA: Somfy curtains and a ceiling lamp. The curtains were easy thanks to an existing library. The lamp (a second-hand Lindby Velua) only came with a small 8-button 2.4 GHz remote. No app, no hub, no Zigbee, and I couldn't find anyone who had done it before.

So I cloned the remote with an ESP32-S3 and a CC2500 module. Short version:

  • Finding it: nRF24 in promiscuous mode. 2-FSK, 250 kbps, hopping on 2402/2448/2479 MHz.
  • The "rolling code": after logging 30 presses it was just an 8-state counter, and the lamp doesn't even check it.
  • The frustrating part: my packets matched the remote bit for bit, but the lamp only reacted about 1 time in 3.
  • The fix: with no SDR that reaches 2.4 GHz, I put the CC2500 in receive mode with no sync word to see the raw bits. That showed a preamble my packets were missing. Added it, and the lamp now reacts every time, even through walls.
  • The other buttons: each one is the on/off frame XOR a fixed value, so a few captures per button were enough.

In HA it's an ESPHome external component with a button per remote button, plus "hold" buttons for dimming and colour temperature. The lamp never transmits, so there's no state feedback. It shares a 3D-printed box with the ESP32 that runs the curtains.

Everything is on GitHub: ESPHome component, protocol notes, capture tools, the failed attempts, and the enclosure files. There's also a section on building a spare remote without HA.

https://github.com/HenrikBiscuit/lindby-velua-rf-bridge

If you have a lamp whose remote PCB says YM-2.4G-B, I'd love to know. It might be in other lamps too.


r/homeassistant • • 3h ago

πŸ–ΌοΈ Show & Tell HA Guest: let visitors control a few things in your home from a QR code β€” no account, no app, only on your Wi-Fi πŸ”‘

68 Upvotes

I wanted friends who come over to be able to turn on the living room lights or start a scene without creating a Home Assistant account or installing the app. And I wanted my mother-in-law, who uses the app to share her location (we are using Family Location), to not be able to switch my lights off from across town. Nothing I found did both, so I built (together with Claude and some friends) HA Guest.

Guests without an account

- A page at `/guest` that opens in any browser. Guests scan a QR code and that's it.

- It only answers devices on the networks you allow (your Wi-Fi or a guest VLAN). Remote access through Home Assistant Cloud is always refused.

- QR links expire after the hours you choose, so someone you invited last month can't stand outside within Wi-Fi range and use it. You can revoke every link at once.

- Anyone in the household (admin or not) can create a code from a "Guest QR" page in the sidebar.

- What guests can control is either a list of entities or a regular dashboard you build for them (dashboards don't look the same to guest due to technical limitations but we made them look as close as possible). Remove a card and they lose that entity immediately.

- It picks up your dashboard's background photo, entity names and icons, your theme and your accent colour. Scenes become a row of round buttons, and lights get brightness and colour temperature.

Restricted users with the app

- Pick a non-admin user and what they can always use (e.g. the map and check-in from a location integration).

- Other entities only work while their phone reports your Wi-Fi, or a router tracker says they're home. Away, those entities are hidden or read-only.

Safety and logging

- Optional rules: the panel only works while someone from the household is home, or while your alarm is disarmed. There's also a switch to pause it.

- Every visit and action goes to the logbook ("Guest (192.168.1.20) turned off Living room lights") and fires an event. It can also notify your phone.

Being upfront about two things

- Guests see a simplified page built from your dashboard, not the dashboard itself. Custom cards like Mushroom or button-card aren't rendered as they look. Showing the real dashboard would mean giving guests a Home Assistant session, which opens much more than a few lights.

- I built this with an AI coding assistant. I designed the features and tested everything on my own setup & some friends setups. There are 30+ automated tests and I ran a security pass on the guest page (expired and forged links, spoofed IPs, DNS rebinding), and the code is all public. Still, please read it before trusting it with a front-door lock, and open an issue if you find anything.

Install: Settings β†’ Marketplace β†’ Add from link β†’ `Ctuna89/HA-Guest` (or as a custom repository in HACS on older versions). Requires 2025.3+.

https://github.com/Ctuna89/HA-Guest

Feedback very welcome, especially on what else guests would actually need.


r/homeassistant • • 1h ago

πŸ–ΌοΈ Show & Tell I made Claude reverse engineer my cheap Lidl kitchen appliance that runs on Android

Thumbnail
gallery
26 Upvotes

Because why not? This is Lidl's Monsieur Cuisine Connect, a cheap (and worse) alternative to Vorwerk's Thermomix.

The Android tablet it runs on communicates with the appliance itself using a serial connection. Getting root on the tablet gave me a way to access that serial port. When running a program started by Home Assistant it displays a warning on the display that it's being remote controlled and a big, red "STOP" button that acts as an emergency stop. Normal safety features like not being able to start with the lid open still apply.

While I was at it, I also added an overlay that shows the kitchen's current temperature, humidity and whatever's playing on the media players in that room. Because, again, why not?

The biggest fun fact though: I also found out why the device felt so awfully sluggish - three out of the SOC's four cores were disabled for some reason. It's running fine now.


r/homeassistant • • 9h ago

πŸ–ΌοΈ Show & Tell Finally got myself a smart home ... screen

Thumbnail
gallery
56 Upvotes

Was never really a widget person, but had C dawg put this together for my pixel, and I'm obsessed.

The widget is connected thru CloudFlare, so always working, and let's me see and toggle lights, shows me my week ahead, front door lock, media. On tap calender info opens calendar, music opens media apps etc, media player hides when not in use, and important notifications display over the less important information.

The best part though is the live updating fake little terminal for a python service thing that keeps an eye on my home stack and network.

The home handler has been running in various forms for a while now giving me notifications thru home assistant about things like device errors, server alerts and a daily and weekly network report. Now though not only can I see it's notifications on my home screen, but I can send it commands directly too.

Battery is running down because I can't stop opening my phone to look at it. Finally, a widget for me.


r/homeassistant • • 2h ago

πŸ–ΌοΈ Show & Tell I think my homekit home has hit its final form

14 Upvotes

r/homeassistant • • 2h ago

πŸ’¬ Discussion anyone else using color e-ink displays with Home Assistant? (weather card included)

Thumbnail
gallery
13 Upvotes

A Home Assistant weather dashboard around an 800 Γ— 480 display and four colors (BWRY).

GIANT numbers, clear sections and a little color made the result much easier to read than my previous grayscale dashboards.

The display is a TRMNL BWRY, which they sent me for review. I'm using their Home Assistant screenshot app to capture the dashboard.

Someone asked for my weather card, so I put it on GitHub for anyone interested:

https://gist.github.com/thingtootech/104be80e6b8906bbbed239d140d49adf

It's a custom JavaScript card that uses Pirate Weather. Feel free to modify it for your own setup. You will want to review it for your own setup.

I'm currently rotating between weather and Google Photos, but Google's seven-day photo selection limit has me interested in other options. I would love to learn more about Immich in general.

The longer write-up, including photos and setup screenshots, is here (contains a referral link): https://thingtootech.blogspot.com/2026/11/trmnl-four-colors-forecast-and-two.html

Beyond weather and maybe photos, what's the best use of color you've seen on an e-ink display?


r/homeassistant • • 1h ago

πŸ–ΌοΈ Show & Tell Reverse engineering a IFT-RC400 fireplace remote to integrate with Home Assistant

Post image
6 Upvotes

I have a Heat & Glo fireplace insert with a RC400 remote control (915 MHz nominal). This may be the slowest, clunkiest remote control ever built, and I in particular get annoyed when it sets the fan speed back to 0 whenever I activate the thermostat. And it's not integrated with anything else.

I looked at getting the WiFi control unit for this fireplace, which has an integration for Home Assistant, but it cost $230, plus the hassle of getting it installed. I figured I could do better than that.

What I used:

XIAO ESP32S3 & Wio-SX1262 Kit with 3D case for Meshtastic & LoRa: from Seeed Studio, SKU# 113110064. About $20, no soldering required, comes in a nice 3D printed case with an antenna, runs off USB power.

NooElect SDR: NESDR Smart SDR bundle. I bought it from Amazon with 3 antennas for $55.

1 month subscription to ChatGPT: $20. I have no idea what I'm doing for the most part.

What I did:

I spent an evening figuring with the SDR figuring out where the fireplace was actually broadcasting, and feeding on / off button presses for ChatGPT to make a basic decoder. Once that was done, I spent 2-3 evenings making more captures & to add extra functionality from the remote.

What it does now:

All the main functions of the remote are now replicated in Home Assistant. power on/off, thermostat, flame height, fan speed, timer control, cold climate pilot control. It updates based on the fireplace feedback broadcasts. The fireplace itself turns out to be very chatty. It's kind of cool to see that I can issue a command from my phone, and then 5 seconds later the RC400 remote updates itself based on the response from the fireplace.

I have a switch which lets me toggle between using the RC400 remote as a thermostat or a temperature provided by another Home Assistant sensor. The fireplace now turns itself off at 10 PM, because I have frequently forgotten to do that before going to bed. If I'm in the house and say "flame on", it turns itself on, sets the thermostat to a comfortable 22 C, and turns the fan to a speed that doesn't cause it to rattle.

There's a GitHub repo for the interested. The manuals say the fireplace / remote pairing is unique to each device. Since I just have the 1 fireplace & 1 remote, it'll probably just work on my setup. If anyone else has a similar setup and can get some captures, making it more general (like was done for the RC300 remote) probably wouldn't take long.


r/homeassistant • • 1h ago

❓ Support Home Assistant Green vs Mini PC

5 Upvotes

Just looking to future proof somewhat. Starting from scratch and fully understand the rabbit hole I’m about to go down.


r/homeassistant • • 4h ago

πŸ€– Automation Added a bit of smart to my District Heating in a Dutch rental apartment

8 Upvotes

So, I live in a rental apartment in the Netherlands. The apartment has District heating with a heat exchanger, the heat exchanger was controlled by a central on/off thermostat, which lives in the same room as one radiator without thermostat valve. Needless to say that that is far from ideal, even though the other radiators had simple thermostatic valves, they would do nothing when the central thermostat didn't call for for heat. I needed this to be smarter and be able to control the system per radiator/room. I started with replacing the dumb thermostatic valves with Smart TRV's (Sonoff TRV-ZBT) and it was already a bit better, but still dependent on the central thermostat and the heat sensors in the TRV's did not really represent the true room temperature, so I added external temperature sensors (Sonoff SNZB-02B). Nice!! But still the central thermostat was in charge, so temperatures in the other rooms lacked most of the time.

At some point I thought, OH! Lets get a smart thermostat, dumbest thought ever, because it would still do the same thing. send on/off to the heat exchanger. When I figured that out I came up with the idea to find a smart on/off relais and make that switch on/off depending on heat demand per room/trv/sensor. I found one of those (sorry again Sonoff, a Mini-ZBD dry contact relais).

This is what it looks in terms of hardware and scheme:

Most important part was leaving the original system in place since this is a rental apartment, so all works in parallel with the original system.

Now this all needed to be connected, working together in a smarter way. A custom template and two automations needed to be created and a bit of tweaking on the reporting settings and disabling smart control on the TRV's in Z2M settings, and creating scheduled setpoints (and changes) for every day of the week.

One automation for syncing the measured temperatures from the external sensors to the TRV's:

alias: Sync External Temp to Sonoff TRV-ZBT (All Rooms)

triggers:

- trigger: state

entity_id:

- sensor.clima_achterkamer_temperature

- sensor.clima_keuken_temperature

- sensor.clima_slaapkamer_3_temperature

- trigger: state

entity_id:

- select.trv_achterkamer_temperature_sensor_select

- select.trv_keuken_temperature_sensor_select

- select.trv_slaapkamer_temperature_sensor_select

to: remote_source_offline

- trigger: time_pattern

minutes: /30

actions:

- repeat:

for_each:

- sensor: sensor.clima_achterkamer_temperature

select: select.trv_achterkamer_temperature_sensor_select

number: number.trv_achterkamer_external_temperature_input

- sensor: sensor.clima_keuken_temperature

select: select.trv_keuken_temperature_sensor_select

number: number.trv_keuken_external_temperature_input

- sensor: sensor.clima_slaapkamer_3_temperature

select: select.trv_slaapkamer_temperature_sensor_select

number: number.trv_slaapkamer_external_temperature_input

sequence:

- if:

- condition: template

value_template: '{{ states(repeat.item.sensor) | is_number }}'

then:

- action: select.select_option

target:

entity_id: '{{ repeat.item.select }}'

data:

option: remote_temperature

- action: number.set_value

target:

entity_id: '{{ repeat.item.number }}'

data:

value: '{{ states(repeat.item.sensor) | float | round(1) }}'

- delay:

seconds: 2

mode: single

Another automation to actually respond to the heat demand from the TRV's and change the relais state:

alias: 'Stadsverwarming: AquaHeat op TRV-warmtevraag'

description: Stuurt de AquaHeat via het potentiaalvrije Sonoff-relais

triggers:

- trigger: state

entity_id: binary_sensor.centrale_warmtevraag

to:

- 'on'

- 'off'

- trigger: homeassistant

event: start

actions:

- choose:

- conditions:

- condition: state

entity_id: binary_sensor.centrale_warmtevraag

state: 'on'

sequence:

- delay:

seconds: 45

- condition: state

entity_id: binary_sensor.centrale_warmtevraag

state: 'on'

- action: switch.turn_on

target:

entity_id: switch.aquaheat_relais

data: {}

- conditions:

- condition: state

entity_id: binary_sensor.centrale_warmtevraag

state: 'off'

sequence:

- delay:

minutes: 3

- condition: state

entity_id: binary_sensor.centrale_warmtevraag

state: 'off'

- action: switch.turn_off

target:

entity_id: switch.aquaheat_relais

data: {}

default:

- action: switch.turn_off

target:

entity_id: switch.aquaheat_relais

mode: single

And a template for a binary sensor to glue it all together:

- binary_sensor:

- name: "Centrale Warmtevraag"

unique_id: centrale_warmtevraag_trvs

device_class: heat

availability: >

{{

expand(

'climate.trv_achterkamer',

'climate.trv_keuken',

'climate.trv_slaapkamer'

)

| rejectattr('state', 'in', ['unavailable', 'unknown'])

| list

| count > 0

}}

state: >

{{

expand(

'climate.trv_achterkamer',

'climate.trv_keuken',

'climate.trv_slaapkamer'

)

| rejectattr('state', 'in', ['unavailable', 'unknown'])

| selectattr('attributes.hvac_action', 'defined')

| selectattr('attributes.hvac_action', 'eq', 'heating')

| list

| count > 0

}}

Now what actually happens is that, if either one of the TRV's is receiving temperatures that are 0.4 degrees Celcius below the current setpoint (from the schedules), it opens up its valve, and the HA automation switches the relais to on and the Aquaheat heat exchanger turns on. Because the central room has a dumb valve that is open, there are no hydraulic restrictions for the heat demanding room to start heating.

The delays in the relay automation prevent brief changes in TRV heat demand from immediately switching the district-heating supply, reducing unnecessary cycling.

System has been dry running for about a week and needed tweaks, but I created a small dashboard to control what is happening (sorry in Dutch):

Put all components in line yesterday and all seems to be working flawlessly since, future will tell whether there are still remaining issues. I had some issues in my Z2M mesh, but those seem to be solved with some tweaks, replacing controller and changing reporting intervals. The dumb room, my living room, stays up to a nice temperature and that is good because that is were I am most of the time. Fun part is, I am an audiophile, and whenever my amplifiers are turned on in the back room, my listening and plant room, the TRV shuts down after 10-ish minutes because the amplifiers start heating the room :-)

I hope this is useful for others, it was an interesting journey, and I had some great help from my friend Copi!

And please shoot holes in the design. Winter is just starting here, and I'd rather discover a failure mode from a Reddit comment than during the first properly cold week. :-)

Added after initial post:

This is what it looks like in terms of installation:


r/homeassistant • • 22m ago

❓ Support New house, finally doing HA permanently. What would you do?

3 Upvotes

After years of renting and running HA on workarounds, we just bought a house and I can finally install everything for real. My plan:

β€’ Lighting: Everything Presence One (mmWave + PIR) in every room so I never touch a switch. Tips on mounting?

β€’ Audio: Whole-home zones from a central amp or sonos with music that follows presence. What's been bulletproof for you?

β€’ HVAC + pool: Full control from HA. Best thermostat and pool controller with good local integration?

β€’ Energy: Whole-home and solar monitoring. Which panel monitor do you recommend?

If you were starting with open walls, what would you wire for that you wish you had?


r/homeassistant • • 20h ago

πŸ–ΌοΈ Show & Tell I paid for a standing desk and still sat all day. So I taught my desk to turn a light red when I don't move

Thumbnail
gallery
120 Upvotes

Standing desks only work if you actually change position. Most days, I didn't. I just stayed in the chair.

So I stopped relying on willpower and let the desk handle it:
πŸ”΄ 90 minutes without moving the desk β†’ a Hue lightbar behind my monitor turns red
🟑 The moment I raise or lower the desk β†’ the lightbar goes back to warm white (or off if the lamps are off)
πŸ€– No app, no timer to start, no notification to swipe away

How it works: A small ToF distance sensor (VL53L0X) mounted under the desk measures the height to the floor. An M5Stack NanoC6 (ESP32-C6) running ESPHome only does two things: it reports the current desk height and a "position changed" event (a height change of more than 5 cm). Everything else is a normal Home Assistant automation I built myself, so it's easy to adapt: the 90 minutes, the color and brightness of the lightbar, and what happens afterwards (warm white if the lamps are on, otherwise off). The sensor is powered by the smart plug I switch on when I sit down, so the timer starts with my workday.

Works with any desk: It doesn't talk to the desk at all, it just measures the height. So in theory it works with any height-adjustable desk, including manual ones.

Cost: about €17 for two M5Stack parts. No soldering, just a Grove cable.

Effort: Built this in a few hours with Claude's help for the research, the ESPHome config and the automation. It's a pretty simple and surprisingly reliable setup, which is part of why I wanted to share it.


r/homeassistant • • 8h ago

πŸ–ΌοΈ Show & Tell Spending a week fighting with tech. Extremely satisfying feeling!

Thumbnail
gallery
11 Upvotes

r/homeassistant • • 1h ago

❓ Support Exclude the PV Battery from Mainenance

3 Upvotes

I just added my PV/Battery into HA and created a dashboard. Nice and easy, but now that battery shows up in Maintenance every other rainy day when it is below a certain value. But that's not a maintenance problem, it's just November.

I know of the Visible tag in the sensors settings, but I do want to see the SoC, just not in the Maintenance section. Is there a way to exclude it any other way?


r/homeassistant • • 1d ago

πŸ–ΌοΈ Show & Tell Home assistant is a blessing

Post image
1.7k Upvotes

My son is having breathing issues, too young to diagnose asthma but that's almost certainly it. We broke out the old Owlet and a quick search found an HA integration for it. Claude hooked up a PiPup overlay for the firestick so we can constantly monitor.

There is nothing like this project or this community, thank you.


r/homeassistant • • 38m ago

⚑ Energy Any devices to monitor 12v battery levels?

2 Upvotes

I have an old standby generator for the house - when there is an interruption of power from the grid, the generator kicks in running off propane. The generator has a 12 volt lead-acid battery for its starter. I want to monitor the battery's charge level and report it in Home Assistant.

I've seen some videos from two different guys that built solutions for their car batteries. The generator battery is essentially a car battery and those ideas should work. But it's a few years since those guys made theirs and possibly there is now a product closer to out of the box rather than DIY ?


r/homeassistant • • 11h ago

πŸ€– Automation Use for an old landline phone.

14 Upvotes

I have an old landline phone hanging around, I wondered if it might have a use.

Now I can't do this, but I considered that one of you might think the idea is reasonable and might run with it.

What if the phone could be made to ring, via home assistant, to alert you for various reasons.

To wake up

Someone at the door

A storm on the way

Or a timer.

Further, what if Home Assistant could also speak through the phone if answered?

It would be nice if the rings were limited and that different rings were available.

A US phone rings differently to an Australian phone.

Just a thought.


r/homeassistant • • 21h ago

🧩 Custom Integration Steam Engine – a Home Assistant integration that keeps your gaming PC's Steam games updated (and turns the PC on and off for it). Looking for beta testers!

Post image
92 Upvotes

Hi everyone,

I've been vibe coding (can't Stress enough how much i'm not a real developer) an integration for something that always annoyed me: I sit down to play, and Steam first wants to download a 40 GB update. So I made Home Assistant handle it.

What it does

Steam Engine checks your installed Steam games for updates every hour. It does this online, so your PC doesn't have to be running. When an update shows up, Home Assistant wakes the PC (a Wake-on-LAN button, a smart plug, a script, anything in HA that can switch it on). The Steam client then installs the update, and the PC shuts down again once it has been idle long enough. When you sit down to play, everything is already up to date.

It won't shut the PC down under you. It never turns the PC off while Steam is downloading, a game is running or a plugin still needs the PC. If someone turned the PC on by hand and then walked away, you get a push notification asking whether to shut it down. It doesn't just do it.

It has two parts. The HA integration holds the logic, settings and notifications. On the Windows PC runs a small PowerShell agent that reports the Steam library, the download state and idle time over MQTT, and that takes commands. No Home Assistant token and no Steam login are stored on the PC. Games are installed and updated by the regular Steam client, not by SteamCMD.

Features

β€’ Hourly update check for all installed Steam games, with automatic installs through the Steam client

β€’ Also finds updates that change only one depot and keep the build number

β€’ Wakes the PC when there's work and shuts it down after it's been idle (it doesn't care how you wake the PC)

β€’ Never shuts down while Steam downloads, a game runs or a plugin is busy

β€’ Push notifications with action buttons: install all updates, delete a large game when space runs out, shut down

β€’ Optional: new purchases are detected (Steam Web API) and installed automatically, even games you bought on your phone

β€’ Optional active hours: automatic updates and installs only at the times you choose

β€’ Start a game from Home Assistant on a PC that's switched off: it wakes up, optionally skips the lock screen once, and the game is running when you sit down

β€’ A dashboard card of its own: your library with game artwork, updates, installs, uninstalls, drive space, history and PC controls (power, restart, lock, close games)

β€’ Pick which drive a game installs to; it can even create a new Steam library on an empty drive

β€’ Several PCs with one Home Assistant, using the same or different Steam accounts

β€’ Events for your own automations: job done, update found, new purchase, game started or ended

β€’ Windows autologon with a lock right after logon, so a woken PC doesn't sit there unlocked

β€’ All wait times on one settings page in HA; English and German, following the language of your HA

β€’ Plugin interface: your own PC-side scripts can keep the PC awake

Requirements

β€’ Home Assistant 2026.8 or newer with MQTT (e.g. Mosquitto)

β€’ A Windows 10/11 PC with the Steam client (it has to sign in by itself when it starts)

β€’ Something in HA that can turn the PC on (WoL, a smart plug, …)

β€’ Optional: the Companion App for push notifications, and a Steam Web API key to detect new purchases

Installation

On HA 2026.11 or newer, add it in the Marketplace from a link; before that, add it in HACS as a custom repository (type Integration). The PC side is a zip from the GitHub release with an Install.cmd that guides you through setup.

Why I need you

It's at version 1.0, but so far it has only run on my own setup. I'm looking for people willing to try it on theirs: different hardware, wake methods, Steam library layouts, several PCs, Microsoft accounts and so on. Bug reports, confusing parts of the setup and "this didn't work on my machine" are exactly what I need. Please open a GitHub issue or comment here.

GitHub: https://github.com/dust51490-spec/steam-engine

Licence: PolyForm Noncommercial, free for personal use.

Thanks for reading!


r/homeassistant • • 1d ago

πŸ–ΌοΈ Show & Tell I love him so much.

163 Upvotes

This is Gerald. I've posted about him before, when he was being created, but this is him in all his glory. I love him. He's my new best friend! πŸ˜€πŸ˜€

(Only friend 😬🀣)


r/homeassistant • • 23h ago

πŸ–ΌοΈ Show & Tell ESP32 Display Upgrades with sensors for CO2, climate and printed housing

Thumbnail
gallery
84 Upvotes

Guition 4 inch display with tessera. Added a SCD41 for CO2 and BME280 for climate and pressure compensation over i2c. Missing step, moving the USBC to the back.


r/homeassistant • • 1d ago Bravo

πŸ—£οΈ Voice & Assist Introducing Kiosk Satellite Ground Control

296 Upvotes

Kiosk Satellite Ground Control is a companion service for Kiosk Satellite. It runs on a computer or server in your home and handles the voice and vision processing that kiosk devices don't have the computing power for. It has two components:

  • Voice Match: speaker recognition, trimming and isolation. Available today.
  • Vision Match: facial recognition using the kiosk's camera. Coming soon.

If you use a local voice assistant with a TV on, you know the problem. You say the wake word and give your command, but the TV keeps talking, so the assistant keeps listening. The TV's words end up in your command, the command runs long or the assistant answers something nobody asked. A guest or a kid talking in the background does the same.

I believe this is one of the biggest problems local voice assistants still have, and Voice Match solves it.

Voice Match

Enroll each person once by reading a short text aloud to a kiosk for about 45 seconds. From then on, Voice Match does three things:

Recognition

Voice Match knows who is speaking about a second into the command, from the voiceprints of the people enrolled. Each kiosk gets a Speaker sensor in Home Assistant for your automations, and a kiosk can answer only the people you choose. "Add milk to my list" or "what's on my calendar" goes to the list or calendar of the person talking, and LLM conversation agents can be told who is speaking too.

Trimming

The kiosk sends everything its microphone hears to Ground Control, and only the speech of the person who said the wake word goes on to the assistant. A TV or another person before, between and after their words is cut out, and the command ends as soon as they stop talking, whatever the TV does.

"Turn on the (TV talking) kitchen lights" reaches the assistant as "turn on the kitchen lights".

Isolation

Isolation is the most advanced of the three. Trimming cuts other voices out between your words. Isolation also removes them where they talk over you, using your voiceprint, so even a TV talking at the same moment as you is taken out of the command. It runs on the whole command once you stop talking.

What to run it on

Recognition and Trimming run on a Raspberry Pi 4. With the Light speaker model they add 0.10 s and 0.41 s to a command.

Isolation needs more. It's meant for a desktop-class CPU or an NVIDIA GPU, and takes about 1.2 s per command on four cores of an i9-13900H.

With an NVIDIA GPU, CUDA cuts the added latency to milliseconds. On an RTX 4000 Ada, all three features together add 0.10 s to a command. The full benchmarks cover a Pi 4, an Intel N100, an i9-13900H, an RTX 4000 Ada and an NVIDIA GB10.

Installation

  • Home Assistant app: add the repository with one click and install it. It runs on the CPU of your Home Assistant machine.
  • Standalone Docker container: a CPU image and a CUDA image for NVIDIA GPUs, both for amd64 and arm64, with ready-made Docker Compose files.

Kiosks on the same network find Ground Control on their own. You approve each kiosk once in the Ground Control app.

Ground Control needs Kiosk Satellite 2026.11.24 or newer.

Getting started

The Getting Started guide takes you from installing to your first recognized command.


r/homeassistant • • 1d ago

🧱 Custom App Vedetta 1.0: my Home Assistant app now sees past the router (VLANs), sends alerts and remembers 30 days.

Post image
179 Upvotes

Vedetta is a Home Assistant app that finds every device on your network and tells you what it is (brand, model, type), and why it thinks so. Local only.

Hey everyone! Vedetta 1.0 "Orizzonte" is out, and your feedback really shaped this one, especially the VLAN support a lot of you asked for. Here's what's new:

- VLANs & extra subnets: Vedetta now sees beyond your main network. Add a VLAN or subnet, test it, name it, and pings it every 15 minutes to spot new devices (and gets their MAC addresses if your router has SNMP enabled).

- Device alerts: tap the bell on any device and your phone gets a notification when it goes offline and when it's back.

- 30-day history: presence and connection quality for every device, for a whole month, plus a quick 12-hour summary whenever something new shows up.

- No more duplicates: if your router or Home Assistant shows up on two networks, Vedetta knows it's the same machine.

- One tile per network on the dashboard, so you can check each VLAN at a glance.

Same rules as before: local only, no cloud, no telemetry, and nothing is written to Home Assistant unless you turn it on. MIT license.

Try it in your browser (no install needed): https://sived80.github.io/vedetta/

GitHub: https://github.com/Sived80/vedetta

I also fixed the double NAT false alarm from last time, thanks to whoever spotted it! If Vedetta gets a device wrong or your VLAN setup is different from mine, let me know. I'd love to hear how it works for you.

--------------------------------------------------------------------------------

Edit: thanks for all the comments! Quick answers to what came up most:

- Traffic: mostly passive listening. One small ARP check per device every 30 s (you can change it), a full sweep every 5 min, ping on other VLANs every 15 min.

- Security: no port to open, the page only goes through HA. It doesn't touch your firewall: it only sees the VLANs HA can already reach.

- Devices found but not added: a bug on my side, I'm on it.

- More categories in HA: coming in the next version.