r/machining • • 20h ago

Manual Looking for a possible identification and/or standard replacement part

Thumbnail
gallery
14 Upvotes

What I’ve got here is a Betts vertical boring mill that was supposedly made pre WWI and we were rebuilding the gearbox for the right side cutting head. We lost the ball retainer spring that goes in the “up/down” gear on the worm gear shaft. I need to find a replacement, but we can’t find a nameplate or anything on here. If anyone could help identify the machine or suggest a replacement part that would be super helpful. If not, enjoy the pictures! :) I’ve provided images of everything with specific markings. Thanks for reading!


r/machining • • 1d ago

Question/Discussion What is this? Came with lathe.

Thumbnail
gallery
27 Upvotes

What is this? Came with a lathe I bought. New to this. Couldn’t find much online. Thanks!


r/machining • • 1d ago

Question/Discussion Does a VFD eliminate changing gears/belt positions?

4 Upvotes

I have an Enco 105-1100. It's the mill I have and it's all I have room for so it's fine but changing speeds on this thing is an absolute pig. I have the belts where I can more or less run without having to change speeds and I just leave it there. If I wire it to a VFD, can I put it to its highest RPM and just use the VFD to run where I need?

I had thought of a CVT for it but that could be getting into another can of worms. I think a VFD would be a great upgrade if it'll completely eliminate swapping the belt around.


r/machining • • 1d ago

Question/Discussion So Cal OC Machinist

3 Upvotes

I need to find a lathe Machinist preferably in Orange County California to do some work for me


r/machining • • 1d ago

Question/Discussion How to Get Into Machining?

0 Upvotes

I'm, currently working in a manufacturing as cutting operator at print shop. I cut fabric on very basic CNC machines for tradeshow displays. As well as printed adhesives, and banners. And well it helped with some getting some experience I think I'm done. And there's nowhere I would want to move up to.

I've done a little bit of research in my options and Machining has caught my eye. I've been applying but no luck so far.

What are shops looking for to hire? I don't have any experience but am willing to learn and usually catch on relatively quickly?

Does taking a course at a trade school, such as Davis Technical College (Kaysville, Utah) help?


r/machining • • 2d ago

Question/Discussion Cutting external threads on an old engine lathe

Thumbnail
gallery
8 Upvotes

Hey folks, I'm almost out of options so I figured I'd get your opinions. I'm trying to cut a 1-1/4 -16tpi external in aluminum using this engine lathe we've got in our shop. I haven't cut external threads since my first year of college and I don't know if anyone at my shop ever has on this machine. I believe I've got everything set up right, based on the data chart and all the photos of the dial and lever positions? If anyone is familiar with this set up/ can tell me what im doing wrong that would be super helpful!

Basically, I believe I've got everything in its place, but when I start feeding it doesn't move. It looks like the lead screw isn't being engaged? I'm probably missing something super obvious.

EDIT: I finally figured out what was wrong! The O lever has a pin right next to it (top right) that you need to pull before the carriage will engage with the leadscrew for threading. The lever pulls ever more right and down to engage with the leadscrew, I was basically leaving it in neutral and wondering why it wasn't grabbing lol. Thank you for everyone's comments!


r/machining • • 2d ago

Question/Discussion Knurling wheel question.

Thumbnail gallery
2 Upvotes

r/machining • • 2d ago

Picture Need advice from og Machinists

Thumbnail
gallery
0 Upvotes

Real title : I worked 100hrs a week for 7 months straight i need a 20-30% raise increase. Above are some screenshots from previous months.

Hello my fellow machinists, im in need of great sage advice from both employees and managers about my situation. I'm trying to get advice on how i can get somewhere between 20-30% raise increase.

I will keep this simple and straight to the point. Machine shop setting in the west coast USA region I've been with the company for about 13 years now. I'm a good employee with a good track record some of the old timers have retired and left the company. Now you have new younger guys feeling in these roles with little experience so now my seniority is alot higher if you care about that stuff. It took me a good decade paying my dues climbing up the wage ladder and now at a somewhat respectable wage but still my current rate has not kept up with inflation.

3 machines were down in my dept. Boss man is very worried that production is gonna get freaked in my dept. Now were down to 1 machine that can cut 3 different jobs that would have been spread out onto the other 3 machines. Basically I have to do 3 different jobs part on 1 single machine back to back. Only me and the 1 other person i work with are the ones that can work in that dept. Than I say hey Boss man ill stay back later so we don't fall behind. Bossman says thanks i appreciate it.

Quick note the previous owner sold the company to the current Boss man as far as i know this is his 1st time being in charge of a full machine shop. Its a small machine shop about 10 - 12 machinists in total were mostly focus in the defense space. The current contract were in is actually more than the companys current capable capacity in terms of output. The demand is probably like triple the amount what were doing before on a monthly basis. They end up out sourcing alot of parts to shave off time and its alittle chaotic over here. Real the ones who are keeping things moving with the increase in volume , are the machinists who have been there for more than 10 plus years which includes me.

Back to the story basically i stay back late until like 11pm 6 days a week racking up about 100hrs every week. Back in March I fixed 1 of the machines that was down i paid for the repair parts out of my pocket. I had to travel back and forth between the repair shop that i was getting the parts from. The hrs I missed tolls and gas I took care of it. All which i was never reimbursed for. At the time i didn't push the subject because i figured the raise i was due for i was going to be taken care of. Well that didnt happen after staying back late for the first full month. I was given the same raise i got last year 2%. Im still in my prime im 29 I basically live at work since it takes me an hour to get home after i finish work about 11pm. At best i get like 3hrs of sleep everynight. Get up around 4:30am back at work by 6am shift start time 6 days a week.

Fast forward to 7 months later the company has hired at least 10 new people. They brought on some new machinists their minimum range was higher than my current rate up to a mid 40s an hr range. I feel cheated since my raise earlier in the year was not what I expected. I feel left behind because the current market is rewarding guys who are coming in now. Leaving is not an option and i dont want to use the leverage of another offer tactic. Seeing as they have the dough to pony up for new hires in the 40s per hour ranges , im going to ask for a rate adjustment closer to what their offering to new hires. Also based on the production problems I solved that are super critical to my dept. At one point they were in a very tight spot and when i started to stay back longer, production went up on my side which in turn makes them look good to their clients and they get the credit for steering the ship back on course even though its me thats doing all the heavy lifting. I have gone above and beyond this whole year.

So what would you do if you were me, how would you go about asking for a 20-30 % increase. I feel like Bossman is gonna throw all the extra ot im doing in my face and use that as a basis to say why do you need more. Or low key call me greedy or guilt trip me for asking for more money. That i dont need more $$ i should be happy with what im currently taking home. Which is nice chunk of change but at the cost of basically having zero life outside of work.


r/machining • • 3d ago

Tooling How to identify an insert? Please don’t be mean, I’m not a machinist… just order the parts…

Thumbnail gallery
4 Upvotes

r/machining • • 3d ago

Question/Discussion Machining titanium

3 Upvotes

Hi! I am making something with titanium. I am wondering if it would be wise to heat treat the raw stock before or after machining. I don't want the part to warp too much if I machine it first then heat treat, there are quite a few .100 walls and 7" long, and I wont be able to grind it. Would it be beneficial to stress relieve it before machining? How hard would it be to machine it after heat treat? I know an edm machine would be fine but would it be a PITA on a cnc lathe?


r/machining • • 4d ago

Manual 12" OD, 12" Long. Gets a 3.4375 bore all the way through. Fun times, lol.

Post image
57 Upvotes

r/machining • • 4d ago

Question/Discussion Where can I find reliable industrial machinery for sale in India that suits different business needs and budgets?

1 Upvotes

your advcie?


r/machining • • 5d ago

Manual Picked up an old French Lathe

Thumbnail gallery
34 Upvotes

r/machining • • 6d ago

Picture Made 2 aluminum handles for the lathe

Thumbnail gallery
79 Upvotes

r/machining • • 7d ago

Picture How it started in 2020, vs how its going today:

Thumbnail
gallery
213 Upvotes

We've gathered some clutter over the years, that's for sure.


r/machining • • 8d ago

Question/Discussion ID Help: Murad Lathe/Milling Machine

Thumbnail gallery
4 Upvotes

r/machining • • 8d ago

Question/Discussion Narrow Slot Chip Evacuation, or, Slot Depth to Tool Diameter Ratio

4 Upvotes

Hey all, I need to profile a part by cutting a 12.55 mm deep slot. My machine is tiny and the endmills I have available to me are a single flute 1/8" diameter and a three flute 6 mm diameter.

In the case of the 1/8" tool, the slot's final depth is over 4x the cutter diameter:

  1. is that an excessive slot depth / tool diameter ratio?
  2. should I cut the slot wider to aid chip evacuation?
  3. do I need to use the thicker, 6mm tool?

#3 is the obvious choice but I'd prefer to use the 1/8" tool if at all possible.

Thanks!


r/machining • • 9d ago

Question/Discussion It may a hand operated press Son you may need it its fate

Post image
0 Upvotes

Check for a stamp on the largest bushing and check the thread with a international thread pitch guide will tell you which country uses that thread this will help because the country insignia where its from and what it is used for…think it presses bearings in to theyre housing and takes off large harmonic balancers on a lathe or machine looks like it has multiple size uses judging by the fine thread and bolt thickness its used for reconditioning engineering. Maybe but its a step in the right direction could be for grandfather clocks that are large and have large cogs and timing gear aswell. Any thoughts anyone ask a Hungarian man or a Englishman..?:)


r/machining • • 9d ago

Question/Discussion Gundrill surface finish

Thumbnail reddit.com
1 Upvotes

r/machining • • 10d ago

Question/Discussion Best way to prevent chatter on thin aluminum walls?

2 Upvotes

Milling some thin-walled 6061 aluminum parts right now and getting slight chatter on the finishing pass.

Usually using a 3-flute end mill. Do you guys prefer lighter radial cuts, faster RPM, or changing up the workholding to keep the wall steady? Any quick tips appreciated.


r/machining • • 10d ago

Question/Discussion Woodworker looking for help

Thumbnail gallery
2 Upvotes

r/machining • • 10d ago

Question/Discussion Speeds/Feeds for Small Diameter Cutters

2 Upvotes

(Small diameter end mills.)

So I've been pouring over the tables in machinery's handbook (31st edition) and while I've figured out how they are used. What they're telling me seems strange.

Page 1112, table 10: the optimal feed/speed combination for end milling 6061 aluminum is 0.015" per tooth / 165 SF/M. Those values are only correct for the cutting parameters assumed by the table...

End Milling: Table data for end milling [is] based on a 3-tooth, 20-degree helix angle tool with a diameter of 1.0 inch, an axial depth of cut of 0.2 inch, and a radial depth of cut of 1 inch (full slot).

the thing is, the table's footnote also says that the given speeds are good for all cutter diameters (as long as the radial DOC to cutter diameter ratio remains constant). So, let's imagine I want to cut a slot with my lil' 3 flute, 1/8" end mill (1:1 radial DOC to cutter diameter)...

(165 * 12) / (1/8 * Pi) = 5042 RPM

(0.015 * 3 * 5042) / 12 = 18.91 feet/min

So a 1/8" cutter needs 5042 RPM and should be fed at 18.91 feet/minute (assuming the same cut parameters as the table data). If you do the math, that feed amounts to 3.78" per second! She'd be rippin'! And the cutter obviously wouldn't even survive first contact.

the problem as I see it is that a small cutter demands a high RPM to achieve the desired surface speed which, when feed is a function of cutter rotations, results in a cartoonishly fast feed/minute.

Thanks for reading, advice is appreciated.


r/machining • • 10d ago

CNC Free space problem

Thumbnail reddit.com
1 Upvotes

r/machining • • 10d ago

Question/Discussion Minimum feed rate when drilling steel?

Thumbnail reddit.com
1 Upvotes