r/Contractor • • 10h ago

Insurance work

0 Upvotes

Hey yall, my buddy and electrical contractor just recently had a bunch of water damage in his house. Insurance is involved, and the initial check to get things put back together is in the mail.

He’d like me to do the work, and I’d love to have a job I can walk to for a month or so. But, I’ve never done any insurance work as far as submitting estimates to the insurance company and haggling. Generally on those jobs I’m a sub and the money is already there

Any advice for structuring my proposals and making sure I don’t get screwed by their negotiating team?


r/Contractor • • 10h ago

Do other self-employed contractors ask "are you staying busy" because they are or aren't themselves?

3 Upvotes

I get that it's just chit chat. But I wonder if this means, more often than not, that they're looking for more work. Anyone notice a trend?

I usually just want to know what projects others are doing... not if they're "staying busy."


r/Contractor • • 13h ago

Foundation

Post image
0 Upvotes

What would you do to temporarily seal this for the winter until I can rip out the concrete and replace in the summer?


r/Contractor • • 16h ago

Cement countertops repair

Post image
2 Upvotes

What is the best way to fix this chip on my counter tops? It’s about 3” wide.


r/Contractor • • 22h ago

Community “give back”

0 Upvotes

I run a home remodeling company based out of central CT, this year I’m looking to do things a little different.

With the holidays approaching I wanted to help a local family out wether it’s with a full holiday meal/groceries, gifts, or even donating my time towards repairs around the house.

Not sure the best way to go about it, whether asking in my local Facebook groups or reaching out to local schools/libraries? Have any other contractors done something like this?


r/Contractor • • 1d ago

Panel upgrades cost question

Thumbnail reddit.com
1 Upvotes

r/Contractor • • 1d ago

Oregon CCB

1 Upvotes

Is anyone else in Oregon insured through an online provider like Thimble and having issues with the CCB deactivating their license?
I’ve never not been insured since I started my company and it’s getting publicly shut down every month on their lookup page.
I have it set up on auto pay so I can’t forget to pay it FFS!


r/Contractor • • 1d ago

Mold on framework

Thumbnail
gallery
0 Upvotes

Is this mold? And if so what’s the proper way to deal with this in new build?


r/Contractor • • 1d ago

Did construction company screw me?

Thumbnail
gallery
3 Upvotes

Alamogordo NM

New construction (2024). Right now Im dealing with roofing issues and I am beyond the 1 year workmanship timeline for warranty. Roofing issues were highlighted in the initial inspection, and I also had water leaking through an AC register during the first rainfall after purchase, which was "resolved" within 1 year timeframe. Now Im having additional water damage issues from another roofing issue. Because this issue took time to manifest, I couldnt know there was an issue unlike free dripping water from a register.

Is it too far of an ask for the construction company to fix these issues on their dime, as it stemmed from the roof that was never fixed as a whole (they patched one part of the roof, and who knows what else open)?

Pic#1 Inspection

Pic#2 Warranty claim

Pic#3 Third party contractor diagnosis


r/Contractor • • 1d ago

Class B - Virginia Contractors License question and need help with process.

1 Upvotes

Hi everyone. I am new here, so howdy. I just moved from overseas to Virginia and I have over 15 years of experience making cabinets from scratch and installing them for a living. My father was a cabinet worker and installer too, so I have all the required experience. I have many years of experience working as a CNC machinist as well.

However, an issue I am having is finding a contractor that can help me out with the three years experience. I called the board and they mentioned that having an out-of-country or even an out of state work experience, the verification process can take up to a year.

I was wondering if anyone has been in my shoes before and what I can do to speed up the process. I really want to get the ball rolling for me and my wife financially and I currently am working as a machinist but making minimum wage.

I have all my out of country certificates and the financial requirements of at least $15K in my bank account, but any insight or help is greatly appreciated.

Thank you guys!


r/Contractor • • 1d ago

Mind the gap?GC says it’s fine

Thumbnail
gallery
0 Upvotes

We’re in NY and hired a GC for a $45K gut bathroom renovation.

The design included a 39” freestanding soaking tub inside a walk-in shower from the very beginning. This was not a last-minute addition or change in scope.

Because the shower floor slopes toward the linear drain, there’s a visible gap beneath the tub ranging from approximately 1/4” to 3/4” at its widest point.

Our GC insists this isn’t a problem. I understand the need for proper drainage, but what happens when water, soap residue, hair, and dirt accumulate in a space that’s nearly impossible to reach? The tub has not been permanently installed yet, but all the tilework is finished. I strongly believe there was miscommunication between his tile people. But maybe I am being unreasonable here.

I’d appreciate some professional opinions:

  1. Is this considered acceptable workmanship?
  2. Should the floor slope and tub placement have been accounted for during planning and construction? Or is the dimensions just too small to have made anything work?
  3. How can we close this gap - nuclear option is to rip out tiles and start over - but I’m looking for other options.

I’m not looking to be unreasonable. I just want to understand whether my expectations are fair and what a solution would look like.

UPDATE: Thanks for the feedback, especially the constructive advice.

A few adds

Tub: Enflair Angie Corner 39” acrylic soaking tub with a recessed base with support feet. 79.5 lbs empty, with a 73.5-gallon capacity.
Installation: The tub has adjustable feet, which have already been adjusted to accommodate the floor slope. It has not been permanently installed.
Design: There was no designer nor architect involved. We shared the vision and asked if it was possible. Devil is clearly in the details, so hard lesson learned.
Floor: Large-format 24” × 48” tiles with a linear drain. All tilework is complete.

I understand that the shower floor must slope for drainage and that the tub needs to remain level. I’m not suggesting otherwise. The gap came as a surprise, and while I’m not looking to assign blame, I don’t think leaving it as is should be our only option. This was a planned installation, and I’d like to explore a practical solution that addresses both the appearance and long-term maintenance concerns.


r/Contractor • • 1d ago

Frameless sliding glass door

Post image
1 Upvotes

I’m looking to install this system. Frameless, track mechanism on top. What options do I have for the bottom? The picture looks like there is just a metal door guide in the middle, and a clip at the bottom on the stationary piece. The shower has a curb. Shower glass company is saying that water would leak under the sliding door unless I install something at the bottom. I want to avoid a track on the bottom. Going for a clean look with minimal hardware. Also don’t want water and gunk accumulating in a bottom track. Any ideas?


r/Contractor • • 1d ago

Mold in floor

Post image
1 Upvotes

r/Contractor • • 1d ago

One bathroom in our latest project

Thumbnail
gallery
16 Upvotes

One of four bathrooms in this whole home remodel. After and before.

Arches were fun!


r/Contractor • • 2d ago

Low bid facepalm Advice needed : Subcontractor pricing question- decal removal

3 Upvotes

GC building a 9,000 sqft home. Been in progress for two+ years.

They hired me to clean the windows as the project starts to get closer to finishing. The windows are large (10ftx5ft) with aluminum powder coated frames. The frame decals (stickers) applied by the manufacturer have become sun baked/damaged. They don’t peel off in one piece, but break in little 1cm crumbs. It’s kind of a nightmare. Can’t scrape them easily and can’t use too much solvent without possibly damaging the paint. Fortunately I am able to soak the stickers and get them up. It is extremely laborious. The adhesive is still strong pieces that do break off stick to your hands (pita).

Anyways, there is approximately 830 linear feet of trouble- decals to be removed. I estimate it will take 60-80 hours to fully remove the decals. I’m thinking of quoting 7-8k for this job. It feels somewhat unreasonable though? Or am just not confident?

I do not work in the construction world so I am unsure how this quote will be received.
For reference I quoted $5600 to wash the Windows and frames and that work has been completed. GC was happy.


r/Contractor • • 2d ago

How detailed are your construction specifications?

2 Upvotes

It seems like a lot of the pain on a job doesn’t come from bad work. It comes from something nobody wrote down...

  • How much detail do you put into your specifications for renovations vs. new homes?
  • Do they become part of the contract with the client, or are they more of an internal resource?
  • What’s a job where something missing from the spec came back to bite you?

Thanks to anyone who takes the time. I’ll read every reply.


r/Contractor • • 2d ago

Am I overreacting about coworkers using my tools without asking?

6 Upvotes

I'm getting pretty tired of people taking tools out of my bag without asking.

A few days ago, my P3 thermal camera went missing. I always kept it in the case it came with, but now both the camera and the case are gone. I'm starting to think someone stole it. I mean, how else would both disappear?

The rubber tip on my nail gun is missing too, and some of the markings on my tape measure have worn off. That tape measure was a gift from my daughter, so I'm especially upset about that one.

I've also seen guys grabbing each other's nail guns and firing nails into scrap wood for no real reason. I don't get it.

I don't mind lending out my tools if someone asks first. But lately people seem to grab whatever they need and put it back wherever they feel like, if they put it back at all.

I'm pretty pissed off at this point. These tools aren't cheap, and I take care of my stuff. But I don't want to start an argument with everyone on the crew either.

Is this normal on your jobsites? Do you guys let coworkers borrow your tools, or do you have a strict no-borrowing rule?


r/Contractor • • 2d ago

Contractors, what are the best alternatives to Indeed for hiring tradespeople?

Thumbnail reddit.com
0 Upvotes

r/Contractor • • 2d ago

Bidding help

Thumbnail
gallery
1 Upvotes

Still very new to the bidding process of being on my own. Any advice of bidding out the labor cost for removal and install of new door? Also looking for recommendations for bidding stuff out moving forward SE Wisconsin


r/Contractor • • 2d ago

Before & after on a full demo and board-formed concrete rebuild

Thumbnail
gallery
3 Upvotes

We run a concrete-only outfit and just wrapped up this full tear-out and board-formed concrete rebuild (retaining walls, columns, steps, and walkway).

Demoing the old failing mortared stone setup and forming everything in rough-sawn lumber eats up way more man-hours on the carpentry side than a standard pour, so getting the estimating and scheduling dialed in with GCs or homeowners upfront is huge.

For the general contractors and trade business owners in here—when a project calls for architectural or board-formed concrete like this, do you prefer bringing in a concrete-only sub who handles the forming and pouring turnkey, or do your own carpenters build the forms?


r/Contractor • • 2d ago

Class C Contractors License

2 Upvotes

Hi everyone! I run a remodeling business in the Harrisonburg, VA area, and I’m looking for guidance on getting a Class C or Class B contractor’s license.

I’ve been researching the requirements, but I’d appreciate hearing from people who have gone through the process:

  • What courses and exams did you have to complete?
  • How does experience verification work? Who can verify your experience, and what documentation is accepted?
  • If most of your experience comes from self-employment and working directly for homeowners, how did you document and verify it?
  • What were the approximate costs and processing times?
  • Any recommendations for prep courses or helpful resources?

I’d also like to understand which specialty designation applies to residential remodeling and how that relates to the license class.

I want to make sure I understand the requirements and prepare everything correctly. Any advice or firsthand experience would be appreciated. Thanks!


r/Contractor • • 2d ago

Is a 6x10 trailer too small for a remodeling contractor

2 Upvotes

I do have limited space in my driveway and currently use a tacoma for my work truck so overall trailer size is limited anyways.

My question is will this be enough trailer in the long run, or will I just quickly out grow it? I primarily want a mini hardware shelf for screws, nails, lags, etc. Table saw, chop saw, tile saw, powered hand tools, etc. Not looking for a mobile workshop i can stand in.

Has anyone had experience with this?


r/Contractor • • 3d ago

Question: How much should a contractor ideally spend to acquire a new customer?

2 Upvotes

Something I've been thinking about:

Say you're paying $30 per lead. You get 4 leads, spend $120 and close one $6,000 project.

On paper, that sounds like a decent deal.

But I'm curious how contractors here actually measure this.

Do you track how many enquiries turn into paying customers, or mostly focus on how much each lead costs?

Would be interesting to hear how others approach this.


r/Contractor • • 3d ago

Why is success in the trades always measured by how many employees and trucks you have?

0 Upvotes

What if someone just wants to work 30 hours a week, make a great living, and have time for their family? What technology would make that possible?