r/DIY • u/bobsmithhome • 11h ago
How I dealt with holes in ceiling...
I moved a dining table light several inches so it would be centered over a larger table. This left a hole where the old lamp box is. To hire a drywall guy to come in would have cost more than I wanted to pay, but the real pain I wanted to avoid was needing to repaint the entire ceiling, or try to match paint, which almost always fails for me. So I did this:

The medallion covers the hole and looks pretty decent. I got this medallion.
Second issue... I installed two Smart Toilets. Both water lines had to be moved, which involved the plumber cutting two holes in the ceiling on the level under the toilets. These a rough holes that look like crap. I had a drywall guy stop by. He would charge just a tad under $900 to fill the holes and match the texture. He'd be in and out for several days. So I decided to do this:

I bought a couple of cold air return grates and used these neodymium magnets.
First I marked the six holes on the cold air return while it was pressed against the ceiling.. Then I tapped these anchors into the ceiling, and screwed the magnets into the anchors, using the screws that came with the anchors. So the magnets are attached to the ceiling. Then the cold air returns snapped into place with the magnets holding them up. It was important to turn the cold air return grates so the slanted slots hide the hole. The holes are now invisible.
These grates now function as an access panel, and it's really on there solid. It's not falling down. And anyone who notices it will just think it is an air return. A poor man's access panel. I'm not poor, but I am lazy, and this went together very quickly. I hope it helps someone.
